Arc surfacing of layers of metal of varying composition and hardness
Збережено в:
| Дата: | 2017 |
|---|---|
| Автори: | V. V. Peremitko, A. I. Panfilov |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2017
|
| Назва видання: | Automatic Welding |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000741861 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Wear-resistant arc surfacing over a layer of alloying charge
за авторством: V. V. Peremitko
Опубліковано: (2014)
за авторством: V. V. Peremitko
Опубліковано: (2014)
Optimization of modes of submerged arc surfacing over the layer of alloying charge of caterpillar machine running gear parts
за авторством: V. V. Peremitko, та інші
Опубліковано: (2015)
за авторством: V. V. Peremitko, та інші
Опубліковано: (2015)
High-temperature hardness of multilayer metal–metal nitride vacuum-arc coatings
за авторством: V. F. Horban, та інші
Опубліковано: (2021)
за авторством: V. F. Horban, та інші
Опубліковано: (2021)
Influence of surfacing modes using powder strips on chemical composition and hardness of deposited metal
за авторством: A. P. Voronchuk, та інші
Опубліковано: (2018)
за авторством: A. P. Voronchuk, та інші
Опубліковано: (2018)
Effect of preliminary application of alloying powders on change of structure and hardness of deposited metal
за авторством: V. V. Peremitko, та інші
Опубліковано: (2019)
за авторством: V. V. Peremitko, та інші
Опубліковано: (2019)
Effect of methods of arc surfacing by flux-cored wire on penetration of base metal and formation of deposited metal
за авторством: A. A. Babinets, та інші
Опубліковано: (2016)
за авторством: A. A. Babinets, та інші
Опубліковано: (2016)
Electrodes for arc surfacing of composite alloys
за авторством: A. I. Belyj, та інші
Опубліковано: (2018)
за авторством: A. I. Belyj, та інші
Опубліковано: (2018)
The influence of electrolyte composition for hard anodizing of aluminium on oxide layer characteristics
за авторством: M. M. Student, та інші
Опубліковано: (2021)
за авторством: M. M. Student, та інші
Опубліковано: (2021)
Design of hard surfaces with metal (Hf/V) nitride multinanolayers
за авторством: C. Escobar, та інші
Опубліковано: (2014)
за авторством: C. Escobar, та інші
Опубліковано: (2014)
Design of hard surfaces with metal (Hf/V) nitride multinanolayers
за авторством: C. Escobar, та інші
Опубліковано: (2014)
за авторством: C. Escobar, та інші
Опубліковано: (2014)
Design of hard surfaces with metal (Hf/V) nitride multinanolayers
за авторством: Escobar, C., та інші
Опубліковано: (2014)
за авторством: Escobar, C., та інші
Опубліковано: (2014)
Shear-induced metallization on (001) and (111) surfaces of diamond during hardness tests
за авторством: S. M. Dub, та інші
Опубліковано: (2021)
за авторством: S. M. Dub, та інші
Опубліковано: (2021)
Production of vacuum-arc high-hard Mo-N coatings
за авторством: A. A. Andreev, та інші
Опубліковано: (2011)
за авторством: A. A. Andreev, та інші
Опубліковано: (2011)
Influence of abrasive mass fractional composition on deposited metal wear resistance
за авторством: V. V. Peremitko, та інші
Опубліковано: (2015)
за авторством: V. V. Peremitko, та інші
Опубліковано: (2015)
Modeling of chemical composition of pool metal in arc methods of welding
за авторством: V. V. Golovko, та інші
Опубліковано: (2016)
за авторством: V. V. Golovko, та інші
Опубліковано: (2016)
Determining shock hardness and micro hardness of nonferrous metals and their alloys
за авторством: O. O. Kotrechko
Опубліковано: (2016)
за авторством: O. O. Kotrechko
Опубліковано: (2016)
Application of ultrasonic packet pulses of raleigh waves for testing the hardness of surface-hardened metals
за авторством: S. Y. Pliesnetsov, та інші
Опубліковано: (2023)
за авторством: S. Y. Pliesnetsov, та інші
Опубліковано: (2023)
Features of the formation of surface layers on metals
за авторством: O. Hertsyk, та інші
Опубліковано: (2022)
за авторством: O. Hertsyk, та інші
Опубліковано: (2022)
Role of non-metallic inclusions in initiation of cracks in arc surfacing
за авторством: Ju. M. Kuskov, та інші
Опубліковано: (2011)
за авторством: Ju. M. Kuskov, та інші
Опубліковано: (2011)
Alloying of surface layer of mould copper plates by the method of plasma-arc remelting
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2017)
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2017)
Features of the structure and properties of metal layers deposited with pre-application of titanium and boron carbides
за авторством: V. V. Peremitko, та інші
Опубліковано: (2022)
за авторством: V. V. Peremitko, та інші
Опубліковано: (2022)
Change in the hardness and elastic modulus of the alloy surface E110 after irradiation with metal ions
за авторством: V. A. Belous, та інші
Опубліковано: (2010)
за авторством: V. A. Belous, та інші
Опубліковано: (2010)
Soft magnetic materials on basis of composition ferrous powders for operation in varied fields
за авторством: A. V. Minitskyi, та інші
Опубліковано: (2012)
за авторством: A. V. Minitskyi, та інші
Опубліковано: (2012)
Composite casting with a controlled surface layer
за авторством: V. V. Jasjukov, та інші
Опубліковано: (2016)
за авторством: V. V. Jasjukov, та інші
Опубліковано: (2016)
New methods of determining the hardness of metals
за авторством: O. O. Kotrechko
Опубліковано: (2015)
за авторством: O. O. Kotrechko
Опубліковано: (2015)
Effectiveness of application of combined magnetic fields in submerged arc hard-facing
за авторством: D. G. Nosov, та інші
Опубліковано: (2009)
за авторством: D. G. Nosov, та інші
Опубліковано: (2009)
Influence of heavy metals on peroxidation processes and composition of cuticle surface layer lipid components of trees leaves
за авторством: V. M. Hryshko, та інші
Опубліковано: (2017)
за авторством: V. M. Hryshko, та інші
Опубліковано: (2017)
Structural changes in HAZ metal overheating region of railway wheels in arc surfacing
за авторством: A. A. Gajvoronskij, та інші
Опубліковано: (2014)
за авторством: A. A. Gajvoronskij, та інші
Опубліковано: (2014)
Restoration of surface layer of MCCB mould copper plate by using plasma-arc technology
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015)
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015)
Stability Loss of Layered Composite under Compression of Reinforcing Layers by Surface Load
за авторством: V. M. Bystrov, та інші
Опубліковано: (2017)
за авторством: V. M. Bystrov, та інші
Опубліковано: (2017)
Refinement of metal structure in arc surfacing under the effect of longitudinal magnetic field
за авторством: A. D. Razmyshljaev, та інші
Опубліковано: (2019)
за авторством: A. D. Razmyshljaev, та інші
Опубліковано: (2019)
Asymptotics of rapidly varying solutions of the differential equations asymptotically close to the equations with regularly varying nonlinearities
за авторством: V. M. Evtukhov, та інші
Опубліковано: (2019)
за авторством: V. M. Evtukhov, та інші
Опубліковано: (2019)
In vitro biocompatibility of amorphous carbon based coatings by varying of surface chemistry and nitrogen concentrations
за авторством: Luk’yanchenko, V., та інші
Опубліковано: (2015)
за авторством: Luk’yanchenko, V., та інші
Опубліковано: (2015)
The fundamentals of synthesis of modified layers on cutting-tool hard alloys
за авторством: S. S. Samotugin, та інші
Опубліковано: (2017)
за авторством: S. S. Samotugin, та інші
Опубліковано: (2017)
Technology of wide-layer hard-facing of large-sized crankshafts
за авторством: A. P. Zhudra, та інші
Опубліковано: (2010)
за авторством: A. P. Zhudra, та інші
Опубліковано: (2010)
Strengthening the surface layer of CCM mould copper plates by hafnium with application of plasma-arc technology
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015)
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015)
Rapidly varying solutions of a second-order differential equation with regularly and rapidly varying nonlinearities
за авторством: V. M. Evtukhov, та інші
Опубліковано: (2018)
за авторством: V. M. Evtukhov, та інші
Опубліковано: (2018)
Effect of alloying charge and external magnetic field on structure and properties of deposited metal
за авторством: V. V. Peremitko, та інші
Опубліковано: (2018)
за авторством: V. V. Peremitko, та інші
Опубліковано: (2018)
Asymptotic behavior of slowly varying solutions of second-order binomial differential equations with rapid varying nonlinearity
за авторством: V. M. Evtukhov, та інші
Опубліковано: (2017)
за авторством: V. M. Evtukhov, та інші
Опубліковано: (2017)
Influence of amplitude and frequency of oscillations of electrode wire in arc surfacing on the formation and structure of the deposited metal and penetration of basic metal
за авторством: A. A. Babinets, та інші
Опубліковано: (2020)
за авторством: A. A. Babinets, та інші
Опубліковано: (2020)
Схожі ресурси
-
Wear-resistant arc surfacing over a layer of alloying charge
за авторством: V. V. Peremitko
Опубліковано: (2014) -
Optimization of modes of submerged arc surfacing over the layer of alloying charge of caterpillar machine running gear parts
за авторством: V. V. Peremitko, та інші
Опубліковано: (2015) -
High-temperature hardness of multilayer metal–metal nitride vacuum-arc coatings
за авторством: V. F. Horban, та інші
Опубліковано: (2021) -
Influence of surfacing modes using powder strips on chemical composition and hardness of deposited metal
за авторством: A. P. Voronchuk, та інші
Опубліковано: (2018) -
Effect of preliminary application of alloying powders on change of structure and hardness of deposited metal
за авторством: V. V. Peremitko, та інші
Опубліковано: (2019)