Application of high-frequency peening to improve the performance of butt welded joints in the atmosphere of temperate climate
Gespeichert in:
| Datum: | 2017 |
|---|---|
| Hauptverfasser: | V. V. Knysh, S. A. Solovej, V. I. Kirjan, L. I. Nyrkova, S. A. Osadchuk |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2017
|
| Schriftenreihe: | Automatic Welding |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000742514 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Influence of corrosion damages on cyclic life of butt welded joints strengthened by high-frequency mechanical peening
von: V. V. Knysh, et al.
Veröffentlicht: (2018)
von: V. V. Knysh, et al.
Veröffentlicht: (2018)
Efficiency of strengthening by high-frequency mechanical peening of butt welded joints at long-time service
von: V. V. Knysh, et al.
Veröffentlicht: (2014)
von: V. V. Knysh, et al.
Veröffentlicht: (2014)
Influence of high-frequency peening and atmosphere of marine climate on the cyclic life of T-welded joints with surface fatigue cracks
von: V. V. Knysh, et al.
Veröffentlicht: (2020)
von: V. V. Knysh, et al.
Veröffentlicht: (2020)
The influence of high-frequency peening on corrosion fatigue of welded joints
von: V. V. Knysh, et al.
Veröffentlicht: (2017)
von: V. V. Knysh, et al.
Veröffentlicht: (2017)
Improvement of cyclic life of welded joints with accumulated fatigue damages by using the high-frequency peening
von: V. V. Knysh, et al.
Veröffentlicht: (2010)
von: V. V. Knysh, et al.
Veröffentlicht: (2010)
Effect of corrosion damages on cyclic life of welded T-joints treated by high-frequency mechanical peening
von: V. V. Knysh, et al.
Veröffentlicht: (2016)
von: V. V. Knysh, et al.
Veröffentlicht: (2016)
The influence of high-frequency mechanical impact strengthening of the butt welded joints of 15KhSND steel on their atmospheric corrosion and resistance to fatigue fracture
von: V. V. Knysh, et al.
Veröffentlicht: (2018)
von: V. V. Knysh, et al.
Veröffentlicht: (2018)
Improvement in cyclic life of welded T-joints under conditions of increased humidity and temperature by using high-frequency mechanical peening
von: V. V. Knysh, et al.
Veröffentlicht: (2016)
von: V. V. Knysh, et al.
Veröffentlicht: (2016)
Improvement of cyclic life of T-welded joints with lacks of penetration in weld root using high-frequency mechanical peening
von: S. A. Solovej
Veröffentlicht: (2013)
von: S. A. Solovej
Veröffentlicht: (2013)
Deformation criterion of effectiveness of welded joint strengthening by high-frequency mechanical peening
von: V. A. Degtjarev, et al.
Veröffentlicht: (2009)
von: V. A. Degtjarev, et al.
Veröffentlicht: (2009)
Procedure of accelerated corrosion testing for modelling the long-term effect of moderate climate atmosphere on welded joints
von: V. V. Knysh, et al.
Veröffentlicht: (2019)
von: V. V. Knysh, et al.
Veröffentlicht: (2019)
The influence of marine environment on fatigue life of butt welded joints of 15KhSND steel, strengthened by high-frequency mechanical impact
von: V. V. Knysh, et al.
Veröffentlicht: (2019)
von: V. V. Knysh, et al.
Veröffentlicht: (2019)
Methods of evaluation of increase of fatigue resistance in butt welded joints of low-carbon steels after high-frequency mechanical peening
von: V. A. Degtjarev
Veröffentlicht: (2019)
von: V. A. Degtjarev
Veröffentlicht: (2019)
Improvement of fatigue and corrosion resistance of welded joints by ultrasonic peening treatment and spark alloying
von: G. I. Prokopenko, et al.
Veröffentlicht: (2014)
von: G. I. Prokopenko, et al.
Veröffentlicht: (2014)
Improvement of fatigue resistance of thin-sheet welded joints of aluminium alloys using high-frequency peening
von: V. V. Knysh, et al.
Veröffentlicht: (2014)
von: V. V. Knysh, et al.
Veröffentlicht: (2014)
Optimization of process of strengthening of welded structures of steel 09G2S using the high-frequency mechanical peening
von: V. V. Knysh, et al.
Veröffentlicht: (2011)
von: V. V. Knysh, et al.
Veröffentlicht: (2011)
About requirements to impact strength of pipeline joints made by flash-butt welding
von: V. I. Kirjan, et al.
Veröffentlicht: (2015)
von: V. I. Kirjan, et al.
Veröffentlicht: (2015)
Evaluation of deformability of pipe steel joints made by automatic continuous flash-butt welding
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2011)
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2011)
Corrosion-mechanical resistance of welded joints of AMg5M alloy produced in different spatial positions of butts
von: L. I. Nyrkova, et al.
Veröffentlicht: (2022)
von: L. I. Nyrkova, et al.
Veröffentlicht: (2022)
Influence of preliminary cyclic loading on efficiency of strengthening of welded joints using high-frequency pinning
von: V. V. Knysh, et al.
Veröffentlicht: (2011)
von: V. V. Knysh, et al.
Veröffentlicht: (2011)
Analysis of causes of failure of site welded butt joints of main pipelines after long-term operation
von: L. I. Nyrkova, et al.
Veröffentlicht: (2023)
von: L. I. Nyrkova, et al.
Veröffentlicht: (2023)
Mutual Effect of Stress Concentrators on the Face and Root Sides of Butt Welded Joint on the Stress State
von: A. V. Moltasov, et al.
Veröffentlicht: (2023)
von: A. V. Moltasov, et al.
Veröffentlicht: (2023)
Improvement of cyclic life of welded T-joints with surface cracks
von: V. V. Knysh, et al.
Veröffentlicht: (2009)
von: V. V. Knysh, et al.
Veröffentlicht: (2009)
Weldability and performance of welded joints
von: A. P. Litvinov, et al.
Veröffentlicht: (2009)
von: A. P. Litvinov, et al.
Veröffentlicht: (2009)
Peculiarities and advantages of friction stir welding of butt joints of thin-sheet aluminium-lithium alloys
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2016)
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2016)
Converter of frequency and phase number for flash-butt welding of rails
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2015)
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2015)
Defects of joints of high-strength rails, made by flash-butt welding
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2013)
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2013)
Equipment for preparation of pipe ends to welding of position butt joints of pipeline
von: L. M. Lobanov, et al.
Veröffentlicht: (2015)
von: L. M. Lobanov, et al.
Veröffentlicht: (2015)
Antioxidant capacity of Cosmos sulphureus plants grown in the temperate climate
von: O. Andrushchenko, et al.
Veröffentlicht: (2022)
von: O. Andrushchenko, et al.
Veröffentlicht: (2022)
Improvement of fatigue resistance of welded joints with accumulated damage at multistep and block loading
von: V. V. Knysh, et al.
Veröffentlicht: (2012)
von: V. V. Knysh, et al.
Veröffentlicht: (2012)
Braze-welding with peening of weld metal during the process of its solidification
von: A. S. Pismennyj, et al.
Veröffentlicht: (2012)
von: A. S. Pismennyj, et al.
Veröffentlicht: (2012)
Influence of dimensions of weld convexity on stressed state of a butt joint in tension
von: G. V. Ermolaev, et al.
Veröffentlicht: (2014)
von: G. V. Ermolaev, et al.
Veröffentlicht: (2014)
Stress concentration in the butt welded joints with a one-sided reinforcement (Review)
von: A. V. Moltasov, et al.
Veröffentlicht: (2019)
von: A. V. Moltasov, et al.
Veröffentlicht: (2019)
Structure of γ-TiAl joints in resistance butt welding with application of interlayers
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2015)
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2015)
Influence of metal structure of pipes on mechanical properties of flash-butt welded joints
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2017)
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2017)
Stress-strain state of polymer pipe welded joints made by butt welding under angle
von: E. S. Nikonova, et al.
Veröffentlicht: (2009)
von: E. S. Nikonova, et al.
Veröffentlicht: (2009)
Investigation of the causes for appearance of defects in welded butt joints of tram rails made by thermit welding
von: E. Turyk, et al.
Veröffentlicht: (2021)
von: E. Turyk, et al.
Veröffentlicht: (2021)
Influence of welding modes on decarburization in the haz of R91 steel in welded joints of dissimilar steels after high-temperature tempering
von: M. O. Nimko, et al.
Veröffentlicht: (2022)
von: M. O. Nimko, et al.
Veröffentlicht: (2022)
Inductors for heat treatment of welded butt joints of railway and tram grooved rails
von: Ye. O. Panteleimonov
Veröffentlicht: (2022)
von: Ye. O. Panteleimonov
Veröffentlicht: (2022)
Heat treatment of butt welded joints of high-strength railway rails (Review)
von: R. S. Gubatjuk
Veröffentlicht: (2019)
von: R. S. Gubatjuk
Veröffentlicht: (2019)
Ähnliche Einträge
-
Influence of corrosion damages on cyclic life of butt welded joints strengthened by high-frequency mechanical peening
von: V. V. Knysh, et al.
Veröffentlicht: (2018) -
Efficiency of strengthening by high-frequency mechanical peening of butt welded joints at long-time service
von: V. V. Knysh, et al.
Veröffentlicht: (2014) -
Influence of high-frequency peening and atmosphere of marine climate on the cyclic life of T-welded joints with surface fatigue cracks
von: V. V. Knysh, et al.
Veröffentlicht: (2020) -
The influence of high-frequency peening on corrosion fatigue of welded joints
von: V. V. Knysh, et al.
Veröffentlicht: (2017) -
Improvement of cyclic life of welded joints with accumulated fatigue damages by using the high-frequency peening
von: V. V. Knysh, et al.
Veröffentlicht: (2010)