Buchumschlag

Strength Analysis of PGV-1000M Steam Generator Support

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	Ja. R. Dubik, B. M. Vasilchenko, S. M. Ageev, I. V. Orynjak
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Nuclear and Radiation Safety (Scientific and technical journa)
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000751347
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Development of ultrasonic testing procedures and determination of performance of the assembly of the joint of header to steam generator PGV-1000M
von: A. V. Dub, et al.
Veröffentlicht: (2014)

Determination of zones of additional control of metal and welded joints of steam generators PGV-213 at strength assessment
von: V. M. Torop, et al.
Veröffentlicht: (2013)

Effect of TiN inclusions and vibration loads on damage of heat exchange pipes of PGV-1000 steam generators
von: Mitrofanov, A.S.
Veröffentlicht: (2022)

Optimization of the detection system for ¹⁶N registration along with coolant leaks in the WWER-1000 steam generator
von: Rudychev, V.G., et al.
Veröffentlicht: (2013)

Physical-mechanical aspects of degradation of heat-echange tubes metal for steam-generators of the type PGW-1000
von: Voyevodin, V.N., et al.
Veröffentlicht: (2019)

Comprehensive diagnostic monitoring of inner defects in welded joint of the assembly connecting collector to steam generator housing in WWER-1000 power unit
von: L. S. Ozhigov, et al.
Veröffentlicht: (2016)

Investigation of the Thermal Strength of Steam Turbine Diaphragms with Reduction of Axial Dimensions
von: B. P. Zaitsev, et al.
Veröffentlicht: (2021)

Determination of Stiffness Characteristics for WWER-1000 Support Components
von: V. M. Vasylchenko, et al.
Veröffentlicht: (2019)

Strength and Service Life of a Steam Turbine Stop and Control Valve Body
von: A. S. Koliadiuk, et al.
Veröffentlicht: (2021)

Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
von: Shulzhenko, Nikolay G., et al.
Veröffentlicht: (2018)

Investigation of the Thermal Strength of Steam Turbine Diaphragms with Reduction of Axial Dimensions
von: Зайцев, Б. Ф., et al.
Veröffentlicht: (2021)

Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
von: Shulzhenko, Nikolay G., et al.
Veröffentlicht: (2018)

Investigation of the Thermal Strength of Steam Turbine Diaphragms with Reduction of Axial Dimensions
von: Зайцев, Б. Ф., et al.
Veröffentlicht: (2021)

Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
von: N. G. Shulzhenko, et al.
Veröffentlicht: (2018)

Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
von: Shulzhenko, N.G., et al.
Veröffentlicht: (2018)

On the need to improve methods of qualification of main steam isolation valve for water/steam-water medium
von: S. V. Vasilchenko, et al.
Veröffentlicht: (2014)

Comparative analysis of methodological approaches to the calculational determination of the forces acting on the VVER-1000 reactor support elements
von: V. O. Posokh, et al.
Veröffentlicht: (2020)

Effect of Slime Layer on the Stress-Strain State of Heat Exchange Tubes in Steam Generator
von: P. Z. Lugovoj, et al.
Veröffentlicht: (2019)

Strength and Service Life of a Steam Turbine Stop and Control Valve Body
von: Колядюк, А. С., et al.
Veröffentlicht: (2022)

Strength and Service Life of a Steam Turbine Stop and Control Valve Body
von: Колядюк, А. С., et al.
Veröffentlicht: (2022)

Choice of basic construction parameters of steam generators for NPP of low power
von: Kravchenko, V.P., et al.
Veröffentlicht: (2019)

Results of studying the causes for cracking in titanium alloy blades of steam turbines of K-1000-60/3000 type
von: V. M. Torop, et al.
Veröffentlicht: (2018)

Qualification of the South Ukraine NPP system &quot;CASTOR&quot; for the eddy current testing of steam generator heat-exchanging tubes and collector ligaments
von: V. N. Vasilchenko, et al.
Veröffentlicht: (2019)

Wet steam generation procedure influence on thermodynamic and aerodynamic processes in wet steam zone for experimental researches
von: Скляров, В. П.
Veröffentlicht: (2016)

Wet steam generation procedure influence on thermodynamic and aerodynamic processes in wet steam zone for experimental researches
von: Скляров, В. П.
Veröffentlicht: (2016)

Wet steam generation procedure influence on thermodynamic and aerodynamic processes in wet steam zone for experimental researches
von: V. P. Skljarov
Veröffentlicht: (2011)

Methodological basis for qualification of the main steam line isolation valve in the beyond design basis accident conditions of expiration of steam-water mixture
von: S. V. Vasilchenko, et al.
Veröffentlicht: (2015)

Analysis of the Influence of Steam Electrification on the Working Processes of a Wet Steam Turbine
von: A. V. Nechaiev, et al.
Veröffentlicht: (2022)

Analysis of the Influence of Steam Electrification on the Working Processes of a Wet Steam Turbine
von: Нечаєв, А. В., et al.
Veröffentlicht: (2022)

Analysis of the Influence of Steam Electrification on the Working Processes of a Wet Steam Turbine
von: Нечаєв, А. В., et al.
Veröffentlicht: (2022)

Thermodynamic Analysis of Steam-Oxygen Gasification of Graphite
von: O. V. Snihur, et al.
Veröffentlicht: (2014)

Effect of Defects on Stress-Strain State of Heat Exchange Tubes of Steam Generators
von: P. Z. Luhovyi, et al.
Veröffentlicht: (2021)

Effect of water temperature at inlet to the steam generating channel on stability of the two-phase flow
von: M. M. Kovetskaja
Veröffentlicht: (2019)

The pressure losses in a forced water flow in the steam-generating channels
von: V. G. Antipov
Veröffentlicht: (2017)

Technological and operating features of the AR-1000 reactors Generation III+ and small modular reactors MR-160
von: V. M. Vashchenko, et al.
Veröffentlicht: (2021)

Development of mathematical models of a working blade of a steam turbine K-1000-60/3000 with the aim of predicting residual Life
von: V. M. Torop, et al.
Veröffentlicht: (2018)

Development of generating capacities in the Moldavian power system on the basis of steam gas plants using
von: Bicova E.V., et al.
Veröffentlicht: (2003)

The numerical investigation of heat transfer at a water flow in the vertical steam generating channel
von: M. M. Kovetskaja, et al.
Veröffentlicht: (2017)

Weldability of high-strength microalloyed steel S460M
von: V. D. Poznjakov, et al.
Veröffentlicht: (2016)

The Ecological Aspects of Rotary Hydrodynamic Steam Generators with Vapour Phase Internal Separation
von: Ju. I. Gorpinko, et al.
Veröffentlicht: (2011)