Fundamental approaches in mathematical modeling of drying processes of capillary-porous and dispersed materials
Gespeichert in:
| Datum: | 2017 |
|---|---|
| 1. Verfasser: | B. Haivas |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2017
|
| Schriftenreihe: | Physico-mathematical modelling and informational technologies |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000751827 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Modeling of heat and mass transfer in the process of drying of colloid capillary - porous materials
von: Zh. O. Petrova, et al.
Veröffentlicht: (2019)
von: Zh. O. Petrova, et al.
Veröffentlicht: (2019)
Investigation of the dispersion processes of composite colloidal capillary-porous materials
von: Zh. O. Petrova, et al.
Veröffentlicht: (2019)
von: Zh. O. Petrova, et al.
Veröffentlicht: (2019)
Energy-efficient modes of drying of colloidal capillary-porous materials
von: Zh. O. Petrova
Veröffentlicht: (2018)
von: Zh. O. Petrova
Veröffentlicht: (2018)
Mathematical processing of results experimental studies of low-temperature modes of drying of capillary-porous materials of spherical shape
von: Yu. F. Sniezhkin, et al.
Veröffentlicht: (2019)
von: Yu. F. Sniezhkin, et al.
Veröffentlicht: (2019)
Modeling of internal diffusion mass transfer during filtration drying of capillary-porous material
von: Ya. Gnativ, et al.
Veröffentlicht: (2020)
von: Ya. Gnativ, et al.
Veröffentlicht: (2020)
Numerical modeling of heat and mass transfer processes in a capillary-porous body during contact drying
von: B. I. Gayvas, et al.
Veröffentlicht: (2023)
von: B. I. Gayvas, et al.
Veröffentlicht: (2023)
Heat pump technologies of low temperature drying of capillary-porous materials spherical shape
von: Yu. F. Sniezhkin, et al.
Veröffentlicht: (2020)
von: Yu. F. Sniezhkin, et al.
Veröffentlicht: (2020)
Investigation of low-temperature drying modes plant capillary-porous materials spherical shape
von: V. M. Paziuk
Veröffentlicht: (2018)
von: V. M. Paziuk
Veröffentlicht: (2018)
Stressed state and stability of porous bodies form in the drying process
von: B. Hayvas, et al.
Veröffentlicht: (2013)
von: B. Hayvas, et al.
Veröffentlicht: (2013)
Grain drying in pulsed regime of drying agent based on the layered structure of a single grain
von: B. Haivas, et al.
Veröffentlicht: (2015)
von: B. Haivas, et al.
Veröffentlicht: (2015)
Construction of the solution of the thermal-convective drying problem for porous solids in drying plants
von: Ye. Ya. Chaplya, et al.
Veröffentlicht: (2015)
von: Ye. Ya. Chaplya, et al.
Veröffentlicht: (2015)
Convective drying of granular material with taking into account two-layered structure of an individual grain 69-80
von: B. Haivas, et al.
Veröffentlicht: (2014)
von: B. Haivas, et al.
Veröffentlicht: (2014)
Mathematical and structural model information technology improvement of drying Printing materials
von: Ya. Yu. Koliano, et al.
Veröffentlicht: (2016)
von: Ya. Yu. Koliano, et al.
Veröffentlicht: (2016)
Convective-thermal grain drying
von: B. Haivas, et al.
Veröffentlicht: (2015)
von: B. Haivas, et al.
Veröffentlicht: (2015)
Investigation of drying the porous wood of a cylindrical shape
von: B. Gayvas, et al.
Veröffentlicht: (2022)
von: B. Gayvas, et al.
Veröffentlicht: (2022)
Methodological approaches to mathematical modeling of methane dispersion in atmospheric air
von: B. O. Blyuss, et al.
Veröffentlicht: (2022)
von: B. O. Blyuss, et al.
Veröffentlicht: (2022)
Paramagnetic centers of the surface of capillary-porous body contacting with monomers during polymerization
von: E. A. Pashchenko, et al.
Veröffentlicht: (2017)
von: E. A. Pashchenko, et al.
Veröffentlicht: (2017)
Mathematical modeling of convection drying process of wood taking into account the boundary of phase transitions
von: Y. I. Sokolovskyy, et al.
Veröffentlicht: (2021)
von: Y. I. Sokolovskyy, et al.
Veröffentlicht: (2021)
Constructing a mathematical model of a viscous capillary liquid in a container
von: Ya. Barniak
Veröffentlicht: (2014)
von: Ya. Barniak
Veröffentlicht: (2014)
Highly porous cubic boron nitride wheels for dry grinding
von: V. K. Starkov
Veröffentlicht: (2013)
von: V. K. Starkov
Veröffentlicht: (2013)
Drying of grain in active regimes taking into account its stratified structure
von: B. Haivas, et al.
Veröffentlicht: (2016)
von: B. Haivas, et al.
Veröffentlicht: (2016)
IT-Tools to Optimize the Process of Conductive Drying of Polygraphic Materials
von: Ya. Yu. Koliano, et al.
Veröffentlicht: (2017)
von: Ya. Yu. Koliano, et al.
Veröffentlicht: (2017)
Evaluation of the fundamental absorption spectrum of a material by its refractive index dispersion in the transparency range
von: Andriyevsky, B.V., et al.
Veröffentlicht: (2004)
von: Andriyevsky, B.V., et al.
Veröffentlicht: (2004)
The Mathematical Simulation of Fine-Dispersed Particles Dehydration Process in Inert Particles Fluidized Bed. 1. The Process Mathematical Model
von: Ju. I. Khvastukhin, et al.
Veröffentlicht: (2011)
von: Ju. I. Khvastukhin, et al.
Veröffentlicht: (2011)
Determination of stress-strain state of hanging grain in pulse mode of drying depending on its placement
von: B. Haivas, et al.
Veröffentlicht: (2016)
von: B. Haivas, et al.
Veröffentlicht: (2016)
Mathematical design of method of joint determination of capillary complex and kinematics viscosity of liquid
von: K. I. Ludanov
Veröffentlicht: (2013)
von: K. I. Ludanov
Veröffentlicht: (2013)
Development of Thermal Technology for Dispersed Materials Processing
von: K. P. Kostohryz, et al.
Veröffentlicht: (2019)
von: K. P. Kostohryz, et al.
Veröffentlicht: (2019)
To modeling the auxetic materials: some fundamental aspects
von: J. J. Rushchitsky
Veröffentlicht: (2014)
von: J. J. Rushchitsky
Veröffentlicht: (2014)
Machining of porous materials
von: A. V. Tolstenko
Veröffentlicht: (2014)
von: A. V. Tolstenko
Veröffentlicht: (2014)
Dry ice is the useful material in welding
von: S. N. Zhiznjakov
Veröffentlicht: (2014)
von: S. N. Zhiznjakov
Veröffentlicht: (2014)
Mathematical Modeling of Pollutant Dispersion in the Air from Industrial Emissions
von: Першина, Юлія, et al.
Veröffentlicht: (2025)
von: Першина, Юлія, et al.
Veröffentlicht: (2025)
Kinetics of the Drying Process of Composite Biopellets on a Convective Drying Bench
von: Петрова, Ж. О., et al.
Veröffentlicht: (2026)
von: Петрова, Ж. О., et al.
Veröffentlicht: (2026)
Kinetics of the Drying Process of Composite Biopellets on a Convective Drying Bench
von: Петрова, Ж. О., et al.
Veröffentlicht: (2026)
von: Петрова, Ж. О., et al.
Veröffentlicht: (2026)
Hematocrit effect on viscosity of erythrocyte suspension in a capillary viscosimeter at small sizes of capillaries
von: A. F. Todrin
Veröffentlicht: (2005)
von: A. F. Todrin
Veröffentlicht: (2005)
Mathematical modeling of vertical migration of radionuclides in catalytic porous envirounment in the nonlinear case
von: A. P. Vlasiuk, et al.
Veröffentlicht: (2015)
von: A. P. Vlasiuk, et al.
Veröffentlicht: (2015)
Mathematical modeling of the solvent was evaporated in explosion power technology drying impregnated lacquer winding electric machines
von: V. K. Sharov, et al.
Veröffentlicht: (2011)
von: V. K. Sharov, et al.
Veröffentlicht: (2011)
Models of porouse medias
von: Ya. S. Kryvoruchko, et al.
Veröffentlicht: (2013)
von: Ya. S. Kryvoruchko, et al.
Veröffentlicht: (2013)
Mathematical modeling an unsteady process of motion two non-mixing liquids in porous medium with allowance for anisotropy of stratum permeability
von: R. A. Mustafaev
Veröffentlicht: (2014)
von: R. A. Mustafaev
Veröffentlicht: (2014)
Bimetal materials and products manufactured by the method of high-temperature non-capillary brazing
von: G. M. Grigorenko, et al.
Veröffentlicht: (2011)
von: G. M. Grigorenko, et al.
Veröffentlicht: (2011)
Possibilities of the Internet in the fundamental mathematical education of teachers- to-be
von: I. V. Kuznetsova
Veröffentlicht: (2013)
von: I. V. Kuznetsova
Veröffentlicht: (2013)
Ähnliche Einträge
-
Modeling of heat and mass transfer in the process of drying of colloid capillary - porous materials
von: Zh. O. Petrova, et al.
Veröffentlicht: (2019) -
Investigation of the dispersion processes of composite colloidal capillary-porous materials
von: Zh. O. Petrova, et al.
Veröffentlicht: (2019) -
Energy-efficient modes of drying of colloidal capillary-porous materials
von: Zh. O. Petrova
Veröffentlicht: (2018) -
Mathematical processing of results experimental studies of low-temperature modes of drying of capillary-porous materials of spherical shape
von: Yu. F. Sniezhkin, et al.
Veröffentlicht: (2019) -
Modeling of internal diffusion mass transfer during filtration drying of capillary-porous material
von: Ya. Gnativ, et al.
Veröffentlicht: (2020)