Buchumschlag

Research of structure and properties polytetrafluoroethylene reinforced fiber arselon

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	A. I. Burja, S. V. Kalinichenko, G. A. Bagljuk, A. S. Redchuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Polymer journal
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000771831
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Microstructure properties of particles reinforced polytetrafluoroethylene composite bearings after wear
von: Ünlü, B.S., et al.
Veröffentlicht: (2015)

Microstructure properties of particles reinforced polytetrafluoroethylene composite bearings after wear
von: B. S. Ьnlь, et al.
Veröffentlicht: (2015)

Investigation of thermal stability organic plastics based of polysulfonamide reinforced by fiber Kevlar
von: A. I. Burja, et al.
Veröffentlicht: (2015)

Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)

The modeling of the composition and properties of functional materials based on polytetrafluoroethylene
von: Berladir, K.V., et al.
Veröffentlicht: (2018)

Fluorescence of radiation modification polytetrafluoroethylene
von: T. V. Sakhno, et al.
Veröffentlicht: (2013)

Influence of mechanical activation of polytetrafluoroethylene matrix of tribotechnical composites on its structural and phase transformations and properties
von: Budnik, O.A., et al.
Veröffentlicht: (2015)

Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)

Improvement of Strength and Radiation Protection Properties of Biodegradable Jute Fiber Reinforced Material
von: Verma, S., et al.
Veröffentlicht: (2017)

Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
von: Daneshfar, M., et al.
Veröffentlicht: (2017)

Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)

Photochromic properties of composite films of thermally irreversible diarylethenes and fulgimides in polytetrafluoroethylene matrix
von: O. I. Kobeleva, et al.
Veröffentlicht: (2011)

Photochromic properties of composite films of thermally irreversible diarylethenes and fulgimides in polytetrafluoroethylene matrix
von: Kobeleva, O.I., et al.
Veröffentlicht: (2011)

Positron Spectroscopy of Polytetrafluoroethylene—Carbon Nanotubes Composites
von: M. M. Nyshchenko, et al.
Veröffentlicht: (2013)

CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)

Morphology and tribological properties of the polymeric nanocomposites on basis of high molecular polytetrafluoroethylene and carbon nanotube
von: N. V. Sadovskaja, et al.
Veröffentlicht: (2012)

Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)

Effect of Carbon Nanotube Embedding on the Mechanical Properties of Delaminated Carbon Fiber Reinforced Polymer Composite Plates
von: Imran, Muhammad
Veröffentlicht: (2026)

Effect of Carbon Nanotube Embedding on the Mechanical Properties of Delaminated Carbon Fiber Reinforced Polymer Composite Plates
von: Imran, Muhammad
Veröffentlicht: (2026)

Morphology and tribological properties of radiation modification polymernanocomposites based on high molecular polytetrafluoroethylene and carbon nanotube
von: N. V. Sadovskaja, et al.
Veröffentlicht: (2012)

Methods of strength and life time evaluation of fiber reinforced concretes (A review)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)

Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)

Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016)

Finite Element Analysis of Thermoelastic Fiber-Reinforced Anisotropic Hollow Cylinder with Dual-Phase-Lag Model
von: Hobiny, A.D., et al.
Veröffentlicht: (2018)

Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)

Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)

Numerical Study of Stability Loss of Near-thesurface Short Fibers in a Purely Reinforced Compossite Material
von: V. A. Dekret, et al.
Veröffentlicht: (2021)

Study of influence of structurizing regims on the properties of structural glass-fiber plastics
von: Karandashov, O.H., et al.
Veröffentlicht: (2018)

Fabrication and characterization of palm sugar tree (Arenga pinnata) fiber composites reinforced by polyester resin
von: Timbangen Sembiring, et al.
Veröffentlicht: (2019)

On the electromagnetic shielding properties of carbon fiber materials
von: Rosu, G., et al.
Veröffentlicht: (2022)

The formation of cupper transition nano-layer in polytetrafluoroethylene surface by means of ion beam assisting deposition
von: Azarenkov, N.A., et al.
Veröffentlicht: (2010)

Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2019)

Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016)

Modeling of thermoelastoplastic deformation of reinforced plates. I. Structural model of the reinforced medium
von: A. P. Yankovskii
Veröffentlicht: (2021)

Reinforcing phases, structure and properties of modified welds of low-alloyed steels
von: V. V. Golovko, et al.
Veröffentlicht: (2016)

The influence of nanosized bacteriostat on properties of polypropylene fibers
von: L. S. Dziubenko, et al.
Veröffentlicht: (2011)

Influence on bainitic hardening properties and structural states of reinforcing rolled steel 30GS
von: G. V. Levchenko, et al.
Veröffentlicht: (2014)

The Effect of Hydrostatic Initial Stress on the Plane Waves in a Fiber-Reinforced Magneto-Thermoelastic Medium with Fractional Derivative Heat Transfer
von: N. Sarkar, et al.
Veröffentlicht: (2016)

The Effect of Hydrostatic Initial Stress on the Plane Waves in a Fiber-Reinforced Magneto-Thermoelastic Medium with Fractional Derivative Heat Transfer
von: Sarkar, N., et al.
Veröffentlicht: (2016)

Physical and chemical, structural and technological properties of melts, glasses and fibres on the basis of rocks and waste of metallurgical manufactures. Part 2. Researches of properties and structure of modification mineral fibers
von: I. I. Diduk, et al.
Veröffentlicht: (2010)