Stress-strain state analysis of the process zone under biaxial loading of a plate with a central crack

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	Yuanli Du, Yu. V. Molkov, T. M. Lenkovskyi, R. A. Kovalchuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Materials Science (Physicochemical mechanics of materials)
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000778251
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Mode I crack initiation in orthotropic viscoelastic plate under biaxial loading
von: O. S. Bogdanova
Veröffentlicht: (2013)

Fracture resistanceof steels under biaxial loading in hydrogen
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2012)

Biaxial tension of a piece-wise homogeneous plate with two cracks at the materials interface with account of plastic zones at their tips
von: M. M. Nykolyshyn, et al.
Veröffentlicht: (2014)

On the Stress-Strain State of Layered Composite Plates under Local Loadings
von: A. V. Marchuk, et al.
Veröffentlicht: (2018)

Optimization of the hole shapes in a quasi-orthotropic plate under biaxial tension
von: M. P. Savruk, et al.
Veröffentlicht: (2021)

Biaxial bending isotropic plate with a through-thickness rectilinear crack with accounting the width of a contact zone of its faces and in the presence of plastic zones near its tips
von: V. K. Opanasovych, et al.
Veröffentlicht: (2015)

The influence of rigidity of stress state under biaxial loading of tubular specimens on strength characteristics of steel 20 in hydrogen
von: S. T. Shtaiura
Veröffentlicht: (2015)

The determination of residual life time of a plate with cracks under block loading
von: Ye. Andreikiv, et al.
Veröffentlicht: (2011)

The life-time of plates with cracks under the long-term static loading
von: Ye. Andreikiv, et al.
Veröffentlicht: (2012)

Stress-Strain State in Bending of Cirsular Plate with System of Cracks with Allowance for Strip Contact of their Edges
von: M. S. Slobodian, et al.
Veröffentlicht: (2024)

Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)

Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)

Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: M. V. Mir-Salim-zade
Veröffentlicht: (2019)

Modeling of fatigue crack growth in plates under arbitrary Mode I stress
von: A. Jankowiak, et al.
Veröffentlicht: (2013)

Self-similarity conditions of an edge transverse shear crack in a square plate
von: T. M. Lenkovskyi, et al.
Veröffentlicht: (2018)

On the Stress-Strain State of Plates of Complex Shape
von: Ja. Grigorenko, et al.
Veröffentlicht: (2018)

Stress-strain state of the plates of zero flexure
von: A. M. Smoliar, et al.
Veröffentlicht: (2015)

Viscoelastic stresses in plates containing inclusion with crack
von: Ya. Soliar
Veröffentlicht: (2016)

On one approach related to the study of the stress-strain state of piecewise homogeneous isotropic plate with a crack under bending considering the width of the contact area of its faces
von: V. K. Opanasovych, et al.
Veröffentlicht: (2015)

Evaluation of the stress intensity factor for transverse shear cracks in a beam specimen
von: P. S. Kun, et al.
Veröffentlicht: (2014)

Transient and steady-state dynamic stresses under antiplane strain of bodies with cracks
von: Ya. Soliar
Veröffentlicht: (2012)

Determination of the stressed state at the edge cracks in a plate with a complex-shape hole
von: V. V. Bozhydarnik, et al.
Veröffentlicht: (2010)

Bending the Plate on Elastic Foundation with Initial Stresses under Action of Moving Load
von: Ju. Babich, et al.
Veröffentlicht: (2017)

Analysis of the stress-strain state of the Bridgman specimen by the finite elements method under axial tension
von: T. M. Lenkovskyi, et al.
Veröffentlicht: (2020)

Analysis of nonlinear stresses and strains in a thin current-carrying elastic plate
von: Ju. Kh. Bian
Veröffentlicht: (2015)

Stress-Strain State and Vibrations of Shell of Complex Shape under Nonstationary Loads
von: P. Z. Lugovoj, et al.
Veröffentlicht: (2016)

Measuremernt of local strain near stress concentrators using the digital image correlation technique
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2014)

Stress-strain state of a half-plane with internal near-surface cracks
von: V. S. Kravets
Veröffentlicht: (2015)

Determination of crack growth resistance characteristics of 17H1S steel under transversal shear
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2013)

On Determination of Stress-Strain State of Plates of Complex Shape
von: Ja. Grigorenko, et al.
Veröffentlicht: (2018)

Determination of stresses in plates with cracks at discrete contact of their faces
von: O. V. Maksymovych, et al.
Veröffentlicht: (2013)

Major stress-strain state of double support multilayer beams under concentrated load. Part 1. Model construction
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Major stress-strain state of double support multilayer beams under concentrated load. Part 1. Model construction
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 1. Model Construction
von: S. B. Kovalchuk, et al.
Veröffentlicht: (2018)

Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)

Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)

Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: M. V. Mir-Salim-zade
Veröffentlicht: (2020)

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 1. Model Construction
von: Kovalchuk, S.B., et al.
Veröffentlicht: (2018)

Modeling of the stress and phase state of the titanium nickelide plate under thermo-mechanical loading
von: Ye. Onyshko, et al.
Veröffentlicht: (2019)

Calculated Assessment of Crack Development Under Cyclic Loading of the Plate Using the Parameters of Dispersed Damage of the Material
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2024)