Buchumschlag

Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	T. Lagoda, A. Kulesa, A. Kurek, J. Koziarska
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Materials Science (Physicochemical mechanics of materials)
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000786443
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Modeling the Process of Damage of Rods owing to Multi-cycle Fatigue in Conditions of Tension-Compression
von: Yu. M. Kobzar
Veröffentlicht: (2022)

Comparison of fatigue characteristics for some selected structural materials under bending and torsion
von: M. Kurek, et al.
Veröffentlicht: (2011)

To Solving the Problems of Fatigue under Combined Loading by Static Torsion and Symmetric Cyclic Bending
von: V. N. Pelykh
Veröffentlicht: (2019)

Variation of selected cyclic properties depending on temperature of the test
von: M. Kurek, et al.
Veröffentlicht: (2014)

Variation of selected cyclic properties depending on temperature of the test
von: Kurek, M., et al.
Veröffentlicht: (2014)

Formation mechanisms and geometry of the crack assemble formed under uniaxial cyclic compression of NaCl single crystals
von: Boyko, Yu.I., et al.
Veröffentlicht: (2012)

Method of low-cycle fatigue test results processing
von: S. Mroziński, et al.
Veröffentlicht: (2012)

Method of low-cycle fatigue test results processing
von: Mroziński, S., et al.
Veröffentlicht: (2012)

Estimation of fatigue life of alloy steel 35NCD16 under random loading
von: M. Kurek, et al.
Veröffentlicht: (2016)

On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)

On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: V. M. Matsevityj, et al.
Veröffentlicht: (2014)

On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)

To the Theory of Growth of Mode I Fatigue Cracks in Thin Isotropic Plates of Finite Sizes under Unilateral Tension-Compression
von: V. P. Golub, et al.
Veröffentlicht: (2018)

Investigation of the microstructure and properties of TRIP 800 steel subjected to low-cycle fatigue
von: Z. M. Rykavets, et al.
Veröffentlicht: (2019)

Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
von: Major, S., et al.
Veröffentlicht: (2008)

Cyclic left and torsion-theoretic spectra of modules and their relations
von: Maloid-Glebova, Marta
Veröffentlicht: (2016)

Cyclic left and torsion-theoretic spectra of modules and their relations
von: M. Maloid-Glebova
Veröffentlicht: (2015)

The limiting state parameters of rock specimen at uniaxial compression by rigid stamps
von: Ja. Lokshina, et al.
Veröffentlicht: (2012)

Low-cycle fatigue of steels after ion nitriding in hydrogen-free environments
von: P. V. Kaplun, et al.
Veröffentlicht: (2016)

Birefringence properties of uniaxially compressed K2SO4 crystals
von: Yo. Stadnyk, et al.
Veröffentlicht: (2013)

Birefringence properties of uniaxially compressed K2SO4 crystals
von: V. Y. Stadnyk, et al.
Veröffentlicht: (2013)

The effect of eccentric tension on the corrosion-fatigue resistance of pump rods
von: H. V. Krechkovska, et al.
Veröffentlicht: (2024)

Stress state of a plane wedge-shaped specimen with an edge crack under uniaxial tension
von: V. S. Kravets
Veröffentlicht: (2017)

Nonlinear Deformation of Cylinders from Materials with Different Behavior in Tension and Compression
von: Галішин, О. З., et al.
Veröffentlicht: (2024)

Nonlinear Deformation of Cylinders from Materials with Different Behavior in Tension and Compression
von: Галішин, О. З., et al.
Veröffentlicht: (2024)

High-temperature creep of hard-alloy samples that are sintering under the conditions of uniaxial compression
von: V. P. Bondarenko, et al.
Veröffentlicht: (2017)

Fatigue of sintered porous materials based on 316L stainless steel under uniaxial loading
von: A. Falkowska, et al.
Veröffentlicht: (2015)

Fatigue life of S355JR steel under uniaxial constant amplitude and random loading conditions
von: A. Nieslony, et al.
Veröffentlicht: (2019)

Mathematical modeling of the electrostressed state in the orthotropic piezoelectric space with an arbitrary orientated circle crack under uniaxial tension
von: V. S. Kyryliuk, et al.
Veröffentlicht: (2018)

Area and point approaches in fatigue life evaluation under combined bending and torsion loading
von: Karolczuk, A., et al.
Veröffentlicht: (2008)

Effect of Platen Restraint on Stress–Strain Behavior of Concrete under Uniaxial Compression: A Comparative Study
von: Kumar, S., et al.
Veröffentlicht: (2016)

Strength of elasto-plastic plates with a square hole (inclusion) and a cut (thin inclusion) under uniaxial tension
von: I. S. Kuz, et al.
Veröffentlicht: (2018)

To the Analysis of Creep Strains of the Thin-Wall Tubular Elements Made of the Linearly Viscoelastic Materials in Conditions of Tension with Torsion
von: V. P. Holub, et al.
Veröffentlicht: (2022)

Models of Long-Term Brittle Fracture of Rods under Tension and Compression in Condition of Creep
von: Ju. M. Kobzar
Veröffentlicht: (2017)

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
von: Склепус, C. М.
Veröffentlicht: (2025)

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
von: Склепус, C. М.
Veröffentlicht: (2025)

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
von: S. M. Sklepus
Veröffentlicht: (2023)

Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
von: M. Kurek, et al.
Veröffentlicht: (2011)

The limiting state parameters of rock specimen at uniaxial compression by rigid stamps taking into account internal and external friction
von: Ja. Lokshina, et al.
Veröffentlicht: (2013)

Strain hardening and microstructure evolution during uniaxial compression of ultrafine grained zirconium in temperature range 4.2–300 K
von: A. V. Podolskij, et al.
Veröffentlicht: (2011)