Buchumschlag

Improvement of impact toughness of metal of combined welded joints of alloyed bainite steels

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	S. I. Moravetskij, A. K. Tsarjuk, A. V. Vavilov, A. G. Kantor
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000814928
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Comparison of methods for evaluating the effect of welding thermal cycle on impact toughness of HAZ metal of low-alloy steel welded joints
von: V. D. Poznjakov, et al.
Veröffentlicht: (2016)

Comparative evaluation of methods for determination of fracture toughness of HAZ metal of low-alloy steel welded joints
von: V. S. But
Veröffentlicht: (2010)

Peculiarities of microstructure and impact toughness of metal of welded joints of pipes made of high-strength steel microalloyed with niobium and molybdenum
von: A. A. Rybakov, et al.
Veröffentlicht: (2015)

Improving the quality condition of the structure of welded joints made of rotor steel
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)

Impact toughness of 34KhN2MA steel welded joints prepared by electrodes with different phase composition
von: A. R. Dziubyk
Veröffentlicht: (2020)

Assessment of susceptibility of welded joints of heat-resistant chromium martensite steel to crack formation during heat treatment
von: Ju. Skulskij, et al.
Veröffentlicht: (2009)

Laser welding of root welds of joints of heat-resistant steel thick metal
von: T. I. Chernaja, et al.
Veröffentlicht: (2010)

Effect of non-metallic inclusions in pipe steels of X65-X80 class of strength on values of impact toughness of welded joints made by flash-butt welding
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2014)

Influence of Conditions of Low-Alloy Bainite Grade Steel Cooling on the Dendritic Structure Parameters and Sphericity of Granular Bainite
von: O. I. Babachenko, et al.
Veröffentlicht: (2024)

Manufacture of the combined welded-forged medium-pressure rotor for 325 mW steam turbine
von: A. K. Tsarjuk, et al.
Veröffentlicht: (2012)

Morphologic Features of Bainite in High-Carbon Complex-Alloyed Steel
von: S. O. Kuzmin, et al.
Veröffentlicht: (2013)

Optimization techniques to obtain the best combination of alloy strength and toughness
von: G. M. Zrazhevskij, et al.
Veröffentlicht: (2016)

Effect of impact treatment of weld metal on strength of welded joint
von: A. S. Pismennyj, et al.
Veröffentlicht: (2010)

Development of flux-cored wire for arc welding of high-strength steels of bainite class
von: V. N. Shlepakov, et al.
Veröffentlicht: (2011)

The influence of laser-impact treatment on impact toughness of heat-resistant steels
von: P. V. Yasnii, et al.
Veröffentlicht: (2010)

Computer modeling of welded joint tough fracture in a Charpy sample
von: I. V. Mirzov
Veröffentlicht: (2014)

Work hardening of steel with a bainite structure
von: V. E. Gromov, et al.
Veröffentlicht: (2015)

The Effect of Notch Tip Position on the Charpy Impact Energy for Bainitic and Martensitic Functionally Graded Steel
von: Eskandari Jam, J., et al.
Veröffentlicht: (2014)

Peculiarities of alloying of welded joint metal of highstrength aluminium alloy with scandium
von: V. E. Fedorchuk, et al.
Veröffentlicht: (2014)

Effect of on-metallic inclusions of rail steel on welded joint formation
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2016)

Improvement of technology of welding of high-temperature diaphragms of steam turbine continuous-flow part
von: A. K. Tsarjuk, et al.
Veröffentlicht: (2016)

Calculation of the radius of transition of the weld to base metal of aluminium alloy welded joints
von: A. V. Moltasov, et al.
Veröffentlicht: (2019)

Structure and properties of steel 15Kh1M1FL welded joints in repair of casting defects by the transverse humping method
von: N. G. Efimenko, et al.
Veröffentlicht: (2014)

Properties of weld metal of double-sided welded joints of pipes of microalloyed steel of increased strength
von: A. A. Rybakov, et al.
Veröffentlicht: (2013)

Effect of weld alloying on structure and properties of welded joints of steel 17Kh2M
von: L. I. Markashova, et al.
Veröffentlicht: (2011)

Effect of carbon on phase composition of weld metal of welded joints of 9% Cr martensitic steel
von: Ju. Skulskij, et al.
Veröffentlicht: (2009)

Microstructure and hardness of metal of welded joints of aluminium-copper alloy
von: R. Alapati, et al.
Veröffentlicht: (2009)

Effect of chemical composition of microalloy steel and rate of cooling of HAZ metal of pipe welded joints on its structure and impact strength
von: A. A. Rybakov, et al.
Veröffentlicht: (2013)

Peculiarities of technology of welding pipelines of dissimilar steels in nuclear power engineering
von: O. G. Kasatkin, et al.
Veröffentlicht: (2010)

Technological capabilities of improving the reliability of welded joints of aluminium-lithium alloys
von: T. M. Labur
Veröffentlicht: (2011)

Delayer fracture resistance of welded joints of rotor steel 25Kh2NMFA after welding reheating
von: Ju. Skulskij, et al.
Veröffentlicht: (2019)

On the kinetics of bainite transformation of austenite in steel during heat treatment in the production flow
von: M. F. Evsjukov, et al.
Veröffentlicht: (2014)

Electrodynamic treatment of welded joints of aluminium AMg6 alloy in the process of heating the weld metal
von: L. M. Lobanov, et al.
Veröffentlicht: (2022)

Numerical modeling and prediction of microstructure of welded joint metal in high-strength steel welding (Review)
von: Ju. Ermolenko, et al.
Veröffentlicht: (2014)

Improvement of the procedure of analysis of thermokinetic diagrams of phase transformations in metal of high-strength low-alloy steel welds
von: V. A. Kostin, et al.
Veröffentlicht: (2021)

Effect of quality of joint edge surface on efficiency of laser welding of low-alloy steels
von: M. Sokolov, et al.
Veröffentlicht: (2013)

Experimental evaluation of temperature shifting of д1c-curve and brittle-tough transition of welded joints of structural steels from results of standard tests
von: V. P. Djadin, et al.
Veröffentlicht: (2011)

Properties of rail steel welded joints in electric arc welding
von: V. D. Poznjakov, et al.
Veröffentlicht: (2010)

Improvement of cyclic life of metallic materials and welded joints by a pulsed current treatment
von: G. V. Stepanov, et al.
Veröffentlicht: (2010)

Nitrogen alloying of weld metal in arc welding of corrosion-resistant steels (Review)
von: V. N. Lipodaev
Veröffentlicht: (2019)