Buchumschlag

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	V. Kryzhanivskyy, V. Bushlya, O. Gutnichenko, R. MSaoubi, J.-E. Stеhl
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000850138
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
von: Kryzhanivskyy, V., et al.
Veröffentlicht: (2017)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
von: V. M. Bushlja, et al.
Veröffentlicht: (2014)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
von: T. Zhao, et al.
Veröffentlicht: (2017)

Sensitivity of Colding tool life equation on the dimensions of experimental dataset
von: D. Johansson, et al.
Veröffentlicht: (2017)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
von: L. Chen, et al.
Veröffentlicht: (2017)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Study on PCD tool wear in hard milling of fully-sintered 3Y-TZP ceramics
von: J. Xu, et al.
Veröffentlicht: (2022)

Superhard pcBN tool materials with Ti3SiC2 MAX-phase binder: structure, properties, application
von: T. Kolabylina, et al.
Veröffentlicht: (2017)

Influence of structure of hybrid super hard material on the performance of drilling tool
von: R. K. Bogdanov, et al.
Veröffentlicht: (2016)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
von: S. A. Klimenko, et al.
Veröffentlicht: (2012)

Study on cutting performance and tool wear of micro-textured tool for milling Ti6Al4V
von: Shen Xiang-yu, et al.
Veröffentlicht: (2017)

An experimental study of the influence of tool material and fine turning conditions on the level of acoustic emission signals
von: L. N. Devin, et al.
Veröffentlicht: (2016)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

Cutting section parametrs for oblique fine turning with a radius tool
von: L. M. Devin, et al.
Veröffentlicht: (2019)

Equipment on base of lathe tools for mill roll hard-facing
von: V. I. Titarenko, et al.
Veröffentlicht: (2013)

The fundamentals of synthesis of modified layers on cutting-tool hard alloys
von: S. S. Samotugin, et al.
Veröffentlicht: (2017)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Wear intensity of the PcBN tools with nanolayered protective coating
von: A. S. Manokhin, et al.
Veröffentlicht: (2020)

Justification of the wear – out rate of drilling tool by the nature of destruction of matrix of diamond – composit material
von: O. P. Vynohradova, et al.
Veröffentlicht: (2016)

Assessment of edge damageability of hard alloy tools under local loading
von: V. V. Khvorostjanyj, et al.
Veröffentlicht: (2015)

Sensitivity of Colding tool life equation on the dimensions of experimental dataset
von: Johansson, D., et al.
Veröffentlicht: (2017)

Characterization of tool wear when machining Alloy 718 with high pressure cooling using conventional and surface-modified WC–Co tools
von: Hoier, P., et al.
Veröffentlicht: (2017)

Principles and analytical tools for reconstruction of probabilistic dependency structures in special class
von: O. S. Balabanov
Veröffentlicht: (2017)

Principles and analytical tools for reconstruction of probabilistic dependency structures in special class
von: Balabanov, O.S.
Veröffentlicht: (2018)

Ensuring fatigue life of parts during finish turning with cubic boron nitride tools
von: K. S. Barandych, et al.
Veröffentlicht: (2018)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
von: Osipov, A.S., et al.
Veröffentlicht: (2016)

Tool materials based on ZrB12
von: A. B. Ljashchenko, et al.
Veröffentlicht: (2010)

Abrasive-containing glass materials as binders for tools
von: S. A. Kukharenko, et al.
Veröffentlicht: (2017)

Thermomoelectric material processing tools and their comparative analysis
von: S. F. Zaparov
Veröffentlicht: (2014)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
von: L. N. Devin, et al.
Veröffentlicht: (2019)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
von: K. O. Diadiura, et al.
Veröffentlicht: (2015)

Research on the structure and properties of high temperature and high pressure composite PCBN tool materials
von: Mo Peicheng, et al.
Veröffentlicht: (2023)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2012)

Superhard pcBN tool materials with Ti₃SiC₂ MAX-phase binder: structure, properties, application
von: Kolabylina, T., et al.
Veröffentlicht: (2017)

Tools for management accounting
von: A. A. Mazaraki, et al.
Veröffentlicht: (2016)

Scientometrics: Methodology and Tools
von: L. Kostenko, et al.
Veröffentlicht: (2016)

Strategic planning tools
von: Ye. Voskresenska, et al.
Veröffentlicht: (2011)

Intensity of wear of functional elements made of diamond-containing composite materials during the operation of tools in the process of rock destruction
von: A. L. Maistrenko, et al.
Veröffentlicht: (2023)

Drilling of composites using tools of polycrystalline superhard materials
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Extending life of diamond tools for machining nonmetallic materials
von: A. I. Sagradjan, et al.
Veröffentlicht: (2018)