Cover Image

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning

Saved in:

Bibliographic Details
Date:	2017
Main Authors:	T. Zhao, M. Agmell, J. Persson, V. Bushlya, J. E. Stеhl, J. M. Zhou
Format:	Article
Language:	English
Published:	2017
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000850180
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: L. Chen, et al.
Published: (2017)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: Chen, L., et al.
Published: (2017)

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
by: V. Kryzhanivskyy, et al.
Published: (2017)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
by: V. M. Bushlja, et al.
Published: (2014)

Cutting section parametrs for oblique fine turning with a radius tool
by: L. M. Devin, et al.
Published: (2019)

cBN based materials with TiN-Al binder phase: sintering, structure, properties
by: K. V. Slipchenko, et al.
Published: (2019)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
by: L. N. Devin, et al.
Published: (2012)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
by: Osipov, A.S., et al.
Published: (2016)

Sintering of cBN based materials with TaC binder for cutting tool application
by: K. V. Slipchenko, et al.
Published: (2020)

HP-HT sintering, microstructure, and properties of B6O and TiC-containing composites based on cBN
by: D. V. Turkevich, et al.
Published: (2015)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
by: N. E. Stakhniv, et al.
Published: (2012)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
by: A. S. Osipov, et al.
Published: (2016)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
by: N. E. Stakhniv
Published: (2013)

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
by: Kryzhanivskyy, V., et al.
Published: (2017)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
by: K. O. Diadiura, et al.
Published: (2015)

Superhard pcBN tool materials with Ti3SiC2 MAX-phase binder: structure, properties, application
by: T. Kolabylina, et al.
Published: (2017)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
by: N. E. Stakhniv, et al.
Published: (2016)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
by: S. A. Klimenko, et al.
Published: (2012)

Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
by: S. A. Klimenko, et al.
Published: (2015)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: P. Han, et al.
Published: (2018)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: Han, P., et al.
Published: (2018)

Фізико–механічні властивості надтвердих композитів систем cBN-Ті, cBN-Al, cBN-перехідний метал-Al, отриманих реакційним спіканням за високого тиску
by: Романенко, Я.М., et al.
Published: (2015)

Plasma hardening of cutting edges of soil-cultivating tool
by: S. S. Samotugin, et al.
Published: (2009)

Cutting-edge industrial technology of mining tool manufacturing
by: Savchenko, Iu., et al.
Published: (2016)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
by: Ye. Stakhniv, et al.
Published: (2022)

Tribology of cutting by tools equipped with cBN_based PSHM
by: A. S. Manokhin, et al.
Published: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
by: Ya. M. Romanenko, et al.
Published: (2017)

Термобаричне спікання композиту cBN–Cr₃C₂
by: Сліпченко, К.В., et al.
Published: (2017)

Influence of reinforcement by the whiskers of Si₃N₄ and Mg₂B₂O₅ on the properties of cBN-based composites
by: Rumiantseva, Yu.Yu., et al.
Published: (2019)

The fundamentals of synthesis of modified layers on cutting-tool hard alloys
by: S. S. Samotugin, et al.
Published: (2017)

Sensitivity of Colding tool life equation on the dimensions of experimental dataset
by: D. Johansson, et al.
Published: (2017)

Твердые растворы в системах cBN-Al и cBN-Al-TiB₂, полученные при высоких давлениях и температурах
by: Беженар, Н.П., et al.
Published: (2011)

Influence of radial depth of cut on entry conditions and dynamics in face milling application
by: A. Agic, et al.
Published: (2017)

cBN–Cu composite: production method and physical properties
by: M. V. Nikishina
Published: (2012)

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
by: N. E. Stakhniv, et al.
Published: (2019)

Assessment of edge damageability of hard alloy tools under local loading
by: V. V. Khvorostjanyj, et al.
Published: (2015)

The influence of VC-Al additive content on structure and phase composition of cBN based superhard materials
by: K. V. Slipchenko, et al.
Published: (2018)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
by: L. N. Devin, et al.
Published: (2019)