Buchumschlag

Development of new generation flux-cored wires for gas-shielded arc welding of joints of low-alloy steels with ultimate strength of 640…940 MPa

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
Hauptverfasser:	V. M. Shlepakov, O. S. Kotelchuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2021
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001223622
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Experience of production and application of seamless flux-cored wire for electric arc welding
von: V. N. Shlepakov, et al.
Veröffentlicht: (2011)

Development of flux-cored wire for arc welding of high-strength steels of bainite class
von: V. N. Shlepakov, et al.
Veröffentlicht: (2011)

Effect of thermophysical properties of cores of self-shielding flux-cored wires on welding-technological properties
von: A. S. Kotelchuk
Veröffentlicht: (2016)

Application of mechanized welding with self-shielding flux-cored wire in repair of metallurgical equipment
von: V. N. Shlepakov, et al.
Veröffentlicht: (2013)

State-of the-art of developments and application of flux-cored wires for welding carbon and low-alloy steels
von: V. N. Shlepakov, et al.
Veröffentlicht: (2010)

Specifics of weld metal desulphurization in flux-cored wire welding
von: V. N. Shlepakov, et al.
Veröffentlicht: (2009)

Current directions of application of lux-cored wire welding of low-alloy increased and high strength steels
von: V. N. Shlepakov, et al.
Veröffentlicht: (2017)

Submerged-arc surfacing of higt-alloy steels by flux-cored wires
von: J.-M. Bonnel, et al.
Veröffentlicht: (2019)

Flux-cored wires of the FMI series for electric arc spraying of coatings (Review)
von: V. I. Pokhmurskij, et al.
Veröffentlicht: (2011)

Experience in application of electric arc surfacing with flux-cored wire at the enterprises of Ukraine
von: A. A. Goljakevich, et al.
Veröffentlicht: (2016)

Mechanical properties and corrosion resistance of electric arc coatings made of flux cored wires
von: V. M. Hvozdetskyi, et al.
Veröffentlicht: (2024)

Research and developments of the E. O. Paton Electric Welding Institute in the field of electric arc welding and surfacing with flux-cored wire (Review)
von: I. K. Pokhodnja, et al.
Veröffentlicht: (2010)

The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: X. He, et al.
Veröffentlicht: (2013)

Laser-arc welding of high-strength steels with yield strength of more than 700 MPa
von: V. D. Poznjakov, et al.
Veröffentlicht: (2015)

Argon arc welding of titanium alloy VT22 by using filler flux-cored wire
von: V. P. Prilutskij, et al.
Veröffentlicht: (2016)

Formation of cold cracks in welded joints of high-strength steels with 350-850 MPa yield strength
von: L. M. Lobanov, et al.
Veröffentlicht: (2013)

Physico-mechanical properties of welded joints of high-strength steel with the yield strength of 690…1300 MPa
von: O. M. Berdnikova
Veröffentlicht: (2021)

Structure and properties of the wear-resistant coatings fused on steel with flux cored wires by an electric arc method
von: V. E. Gromov, et al.
Veröffentlicht: (2014)

Influence of electric parameters of flux-cored wire arc surfacing on process stability and base metal penetration
von: Ju. N. Lankin, et al.
Veröffentlicht: (2014)

Effect of methods of arc surfacing by flux-cored wire on penetration of base metal and formation of deposited metal
von: A. A. Babinets, et al.
Veröffentlicht: (2016)

Improvement of technological and sanitary-hygienic characteristics of arc welding process in shielding gas environment
von: V. N. Shlepakov, et al.
Veröffentlicht: (2019)

Flux-cored wires for wearand heat-resistant surfacing and spraying
von: Ju. S. Korobov, et al.
Veröffentlicht: (2017)

Flux-cored wires at world and regional markets of welding consumables
von: A. A. Mazur, et al.
Veröffentlicht: (2015)

Development of electric arc spray coatings for reconditioning rods of hydraulic cylinders of mining equipment, using flux-cored wires
von: T. R. Stupnitskij, et al.
Veröffentlicht: (2017)

Application of a complete factorial experiment to optimize the filling factor and charge density of the self-shielding flux-cored wire
von: І. O. Trembach, et al.
Veröffentlicht: (2024)

Flux-cored wire for wear-resistant surfacing of thin-sheet structures
von: A. A. Babinets, et al.
Veröffentlicht: (2017)

Peculiarities of thermal spraying of coatings using flux-cored wires (Review)
von: B. Vilage, et al.
Veröffentlicht: (2011)

Weldability of high-strength alloyed steels with yield strength of 590...785 MPa
von: V. D. Poznjakov
Veröffentlicht: (2018)

Flux-cored wires, providing deposited metal with high resistance to adhesion wear
von: V. V. Osin
Veröffentlicht: (2015)

Welding and technological properties of flux-cored wire with the charge in the form of granular powder
von: I. O. Riabtsev, et al.
Veröffentlicht: (2024)

Peculiarities of structure of coatings of Fe–Cr–Al system flux-cored wire produced under the conditions of supersonic electric arc metallization
von: V. N. Korzhik, et al.
Veröffentlicht: (2014)

lnternet database of arc surfacing process using lux-cored wires
von: V. G. Solovev
Veröffentlicht: (2018)

Influence of cored wire diameter on structure and properties of arc sprayed coatings
von: H. V. Pokhmurska, et al.
Veröffentlicht: (2017)

Effect of aluminium additions to flux-cored wire on properties of high-carbon deposited metal
von: Ju. Krivchikov
Veröffentlicht: (2012)

Application of complexly-alloyed powders, produced by the method of thermocentrifugal spraying, in flux-cored wires
von: A. P. Zhudra, et al.
Veröffentlicht: (2014)

Filler flux-cored wire for TIG welding and surfacing of titanium alloy VT22
von: S. V. Akhonin, et al.
Veröffentlicht: (2019)

Development of flux-cored wire of ferrite grade for hardfacing of parts of high-carbon steels
von: Ja. P. Chernjak
Veröffentlicht: (2013)

Influence of ultradispersed carbides in flux-cored wires on the properties of heat-resistant deposited metal
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2009)

New flux-cored wire providing the effect of strain hardening of deposited metal in service
von: L. S. Malinov, et al.
Veröffentlicht: (2009)

Ways of improvement of corrosion resistance of coating deposited under flux with high-chromium cored wire
von: Yu. M. Kuskov, et al.
Veröffentlicht: (2019)