Modern methods of organizing directionsstreams in the tundish continuous casting machine

Modern methods of organizing directionsstreams in the tundish continuous casting machine

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	A. N. Smirnov, S. V. Kuberskij, A. P. Verzilov, D. I. Gojda, Ju. Ju. Kulish
Format:	Artikel
Sprache:	English
Veröffentlicht:	2017
Schriftenreihe:	Casting processes
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001039863
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Physical Model of a Double-Chamber Tundish with Magnetic Stirring
von: V. I. Dubodelov, et al.
Veröffentlicht: (2019)

Optimization of tundish box work in tundish high productivity 7-Strands billet CCM
von: O. M. Smirnov, et al.
Veröffentlicht: (2015)

Application of Electromagnetic Forces in Continuous Steel Casting
von: V. I. Dubodelov, et al.
Veröffentlicht: (2019)

Development of a Two-Chamber MHD Tundish for Metal Casting
von: O. M. Smirnov, et al.
Veröffentlicht: (2021)

Physical modeling of the asymmetric flow of the metal in the mold slab of continuous casting machine
von: A. P. Verzilov
Veröffentlicht: (2019)

Modeling of conditions of formation oscillation marks on the surface of continuous casting ingot
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Blowing steel of inert gas in six-strand tundish
von: O. M. Smirnov, et al.
Veröffentlicht: (2015)

Dynamic cooling control continuous casting in transient modes of casting in the metallurgical micromills
von: A. N. Smirnov, et al.
Veröffentlicht: (2016)

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Continuous casting machine of DMZ – an important historical event in development of the continuous casting process
von: D. A. Djudkin
Veröffentlicht: (2011)

Method of Optimization Thermal Operating of the Mould in Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2016)

Mathematical Modeling of the Motion of Convective Flows of the Melt in a Single-Flow Tundish of a Modern Micro-Plant While Providing a Refining Effect
von: O. P. Verzilov, et al.
Veröffentlicht: (2021)

Features of the Occurrence of Starting Fans in the Continuous Casting of Billets by Open Jet
von: A. N. Smirnov, et al.
Veröffentlicht: (2019)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2014)

Influence of periodic oscillations and fluctuations of the metal level in the crystallizer on the continuous casting process
von: O. M. Smirnov, et al.
Veröffentlicht: (2018)

Strain state continuous ingot liquid core in the curved continuous casting machine
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2015)

Ways to Intensify Heat Exchange Processes in the Mold of a Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2019)

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing
von: Ju. N. Nikitjuk, et al.
Veröffentlicht: (2013)

Influenced by of oscillation and parameters of oscillations of the moldon the surface quality of continuous casting ingots
von: O. M. Smirnov, et al.
Veröffentlicht: (2015)

Advanced technology for continuous casting of steel: opportunities and challenges
von: A. N. Smirnov
Veröffentlicht: (2014)

Synchronous Magnetoelectrical Stirrer of Liquid Metal in the Mold of Continuous Casting Machine the Steel
von: I. P. Kondratenko, et al.
Veröffentlicht: (2014)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
von: A. P. Gopkalo, et al.
Veröffentlicht: (2015)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
von: V. N. Matvienko, et al.
Veröffentlicht: (2018)

Classification and Optimization of Ferroaluminium Alloys for Tundish of Steel Processing
von: B. F. Belov, et al.
Veröffentlicht: (2016)

Electromagnetic power of magnetic system stirrer liquid metal in the mold of continuous casting machine
von: T. V. Vishtak, et al.
Veröffentlicht: (2013)

Effect of Intensive mixing of the melt on the hydrodynamics of liquid metal into the mold continuous casting machine
von: N. I. Tarasevich, et al.
Veröffentlicht: (2011)

Change of working properties for slag-forming mixtures during sequence casting and its effect on continous casting process
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

The method of processing and analysis of the images of a network of thermal fatigue cracks on the surface of work-pieces continuous casting machine roller
von: I. V. Konovalenko, et al.
Veröffentlicht: (2018)

Impact toughness of bimetallic specimens cut out from the rolls of continuous casting machines with welded layer
von: P. O. Marushchak, et al.
Veröffentlicht: (2012)

Quality assurance process for continuous casting
von: O. N. Khoroshilov, et al.
Veröffentlicht: (2013)

The reasons of deformation and fracture of the working surface of the casting wheel of continuous rotary caster
von: O. M. Smirnov, et al.
Veröffentlicht: (2016)

Formation of structure and mechanical properties of rounds of continuous casting steel
von: G. V. Levchenko, et al.
Veröffentlicht: (2011)

Influense of blowing of Inert gas purge in the tundish on the distribution of non-metallic Inclusions
von: V. G. Efimova, et al.
Veröffentlicht: (2014)

The influence of vibration on the formation of bloom continuous casting
von: A. S. Nuradinov, et al.
Veröffentlicht: (2013)

Thermal stresses in two-layer rollers for continuous billet casting machines under variation of the base and cladding metals properties
von: A. P. Gopkalo, et al.
Veröffentlicht: (2011)

Pressing unit for die-casting machines
von: V. S. Bogushevskij, et al.
Veröffentlicht: (2016)

Physical modeling of the process of compression of continuously cast slabs and blooms during their crystallization
von: O. M. Smirnov, et al.
Veröffentlicht: (2017)

Formation of metal drops in slag phase at steel blowing inert gas in the tundish
von: V. G. Efimova
Veröffentlicht: (2014)

Features of the Formation of a Shrink Shell in the Conditions of Casting Steel on SCCM
von: O. M. Smirnov, et al.
Veröffentlicht: (2019)

Complex Technology of Obtaining Qualitative Castings of Machine-Building and Metallurgical Purpose
von: V. A. Krivosheev, et al.
Veröffentlicht: (2019)