Cover Image

Improving heat resistance of polycrystalline diamond compact cutters with co–si–b binder for rock drilling

Saved in:

Bibliographic Details
Date:	2017
Main Authors:	B. C. Liu, C. Li, S. Q. Liu, X. Cao
Format:	Article
Language:	English
Published:	2017
Series:	Tooling materials science
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001084083
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Improving heat resistance of polycrystalline diamond compact cutters with co–si–b binder for rock drilling
by: Liu, B.C., et al.
Published: (2017)

Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
by: V. F. Khorunov, et al.
Published: (2012)

Peculiarities of induction brazing of diamond-hard-alloy cutters with body wing of composite drilling bit
by: B. V. Stefaniv
Published: (2013)

Surface properties of composite compacts based on diamond of AC 6 grade with carbon binder
by: V. H. Poltoratskyi, et al.
Published: (2017)

Influence of the tool shape and location of cutters in it on the force distribution between the cutters at drilling gas-drainage boreholes
by: V. G. Krasnik
Published: (2013)

Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
by: A. Kurio, et al.
Published: (2012)

Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
by: Kurio, A., et al.
Published: (2012)

Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films
by: D. S. Li, et al.
Published: (2014)

Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films
by: Li, D.S., et al.
Published: (2014)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
by: V. I. Lavrinenko, et al.
Published: (2016)

Research of technological parameters of blasthole drilling with cutter drilling bits which have pins of different regidity
by: V. G. Synkov, et al.
Published: (2016)

Effect of the diamond-metal binder interface on the thermal expansion coefficient and wear resistance of electrosinted diamond composites
by: A. S. Bieliaiev, et al.
Published: (2018)

Development of technology of brazing of diamond-hardalloy cutters
by: B. F. Stefaniv
Published: (2013)

Implementation of the rock thermal cyclic weakening in the diamond drill bits with an elastic console
by: V. F. Gankevich, et al.
Published: (2018)

Influence of durability of synthetic diamonds on efficiency of destruction of mountain rock drill bits
by: A. M. Isonkin
Published: (2016)

Novel wear-resistant superhard diamond composite polycrystalline material
by: A. A. Shulzhenko, et al.
Published: (2018)

Compressive Properties of SiC Particle-Reinforced Aluminum Matrix Composites under Repeated Impact Loading
by: Cao, D.F., et al.
Published: (2015)

Efficiency of the use of diamond drilling bits with a different intensity of the destruction of the mountain rocks
by: A. M. Isonkin
Published: (2017)

Drilling of composites using tools of polycrystalline superhard materials
by: L. N. Devin, et al.
Published: (2018)

Thermal stability of ultrahard polycrystalline diamond composite materials
by: D. Meng, et al.
Published: (2015)

Thermal stability of ultrahard polycrystalline diamond composite materials
by: Meng, D., et al.
Published: (2015)

Investigation of cutting temperature in turning cutters with diamond-carbide plates
by: L. N. Devin, et al.
Published: (2018)

Evaluation of efficiency of destruction of solid rocks by drilling crowns, equipped with synthetic diamonds and insertions DPCM+
by: A. P. Zakora, et al.
Published: (2018)

Design on Key Parameters of Double Damper System for Hydraulic Rock Drill
by: X. Geng, et al.
Published: (2019)

Design on Key Parameters of Double Damper System for Hydraulic Rock Drill
by: Geng, X., et al.
Published: (2019)

Energy criteria for the efficiency of diamond drilling with a flash wash
by: A. A. Kozhevnikov, et al.
Published: (2017)

Evaluation of diamond-coated tools in drilling high-strength CFRP composites
by: J. Xu, et al.
Published: (2022)

Effect of the contact conductivity of the diamond–metal binder interface on the thermal conductivity of diamond-containing composites
by: R. S. Shmehera, et al.
Published: (2015)

Optimization of designing on cutter parameters of PCD saw blades by simulation analysis
by: X. Yang, et al.
Published: (2019)

Influence of diamond defects on workability drill bits
by: A. M. Isonkin, et al.
Published: (2017)

Metal binder based on nickel for an intensive electrosintering of diamond_containing composites
by: R. S. Shmehera, et al.
Published: (2014)

Metal binder based on nickel for an intensive electrosintering of diamond_containing composites
by: R. S. Shmehera, et al.
Published: (2014)

Resource-saving issues when recovering diamond particles from rock sludge, which was formed during the operation of the diamond drilling and stone-working tool
by: N. A. Olejnik, et al.
Published: (2019)

Sensitivity analysis and proportioning design of rock burst similar materials
by: Yongsheng Liu, et al.
Published: (2017)

Peculiarities of calculating the geometric parameters of a diamond cutter for the formation of ring Fresnel lenses
by: Зенін, В. М., et al.
Published: (2024)

Modified Norris–Landzberg Model and Optimum Design of Temperature Cycling ALT
by: Sun, F.Q., et al.
Published: (2016)

Automated control systems of the drilling process
by: A. A. Kozhevnikov, et al.
Published: (2018)

Preparation and characterization of diamond–silicon carbide–silicon composites gaseous silicon vacuum infiltration process
by: R. J. Liu, et al.
Published: (2014)

Preparation and characterization of diamond–silicon carbide–silicon composites gaseous silicon vacuum infiltration process
by: R. J. Liu, et al.
Published: (2014)

Preparation and characterization of diamond–silicon carbide–silicon composites by gaseous silicon vacuum infiltration process
by: Liu, R.J., et al.
Published: (2014)