Buchumschlag

Influence of phase composition on physico-mechanical properties of composites based on silicon, boron and titanium nitrides, sintered under high pressure

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	V. S. Urbanovich, T. D. Malikina, E. O. Lavysh, S. V. Grigorev, V. S. Niss, L. Jaworska, P. Klimczyk, M. Rosmus, S. Cygan
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001084115
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Effect of dispersity of powder, pressure and sintering temperatures for microstructure and physico-mechanical properties of boron carbide ceramics
von: V. S. Urbanovich, et al.
Veröffentlicht: (2018)

Preventive action of silicon nitride at HT-HP sintering of cubic boron nitride
von: I. A. Petrusha, et al.
Veröffentlicht: (2015)

Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2021)

Effect of sintering temperature and applied pressure on the properties of boron carbide- silicon carbide composites
von: Ya. Z. Aygьzer, et al.
Veröffentlicht: (2021)

Electrical resistivity of pressureless sintered aluminum nitride based composite with addition of nanosized silicon carbide
von: I. P. Fesenko, et al.
Veröffentlicht: (2017)

Cubic boron nitride thermobaric sintering in occurrence of unstable nitrides based on chromium and iron
von: I. A. Petrusha, et al.
Veröffentlicht: (2016)

Temperatures during the dry cutting of titanium alloy using diamond composites with ceramic bonding phases
von: L. Jaworska, et al.
Veröffentlicht: (2017)

Temperatures during the dry cutting of titanium alloy using diamond composites with ceramic bonding phases
von: Jaworska, L., et al.
Veröffentlicht: (2017)

Structure of gold islet films on thermobaric sintered cubic boron nitride
von: I. P. Fesenko, et al.
Veröffentlicht: (2020)

Structure peculiarities of cubic boron nitride polycrystals manufactured by direct conversion sintering
von: I. A. Petrusha, et al.
Veröffentlicht: (2017)

Structure features and fracture mechanisms of hexagonal boron nitride based composite materials
von: Vishnyakov, L.R., et al.
Veröffentlicht: (2007)

Physico-mechanical and physicochemical interaction at sintering of cBN-TiB₂ composites under ultrahigh pressure
von: Garbuz, T.O., et al.
Veröffentlicht: (2007)

The structure and properties formation of titanium-matrix composite depending on the method of sintering
von: Ye. H. Byba, et al.
Veröffentlicht: (2014)

Changing the performance of diamond finishing of ceramic balls of boron carbide and silicon nitride
von: S. V. Sokhan, et al.
Veröffentlicht: (2021)

Reinforcement of material based on the cubic boron nitride by the help of silicon carbide whiskers
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2018)

Elastic properties and plasticity of the polycrystals and cutting composite materials on a base of cubic boron nitride
von: O. I. Zaporozhets, et al.
Veröffentlicht: (2019)

Physico-chemical and photocatalytic properties of composite samples based on titanium dioxide and strontium titanate
von: T. A. Khaljavka, et al.
Veröffentlicht: (2016)

The influence of mechanical activation modes of charge on the structure and phase composition of sintered multi-component titanium-based composites
von: O. V. Baranovska, et al.
Veröffentlicht: (2021)

Superhard composite powders of abrasive purposes based on diamond and cubic boron nitride structured by carbon binder
von: V. G. Poltoratskij
Veröffentlicht: (2017)

Influence of the prescribed composition on hardness of a grinding wheel with a decreased concentration of cubic boron nitride
von: V. K. Starkov, et al.
Veröffentlicht: (2015)

Synthesis of cubic boron nitride with using of dense modifications of boron nitride polycrystalline grains
von: I. O. Borymskyi
Veröffentlicht: (2017)

Determination of surface grafene-boron nitride
von: V. A. Petrova, et al.
Veröffentlicht: (2015)

Structural changes of vanadium nitride under the conditions of thermobaric sintering in the cBN-VN-Al ceramic composite
von: N. M. Belyavina, et al.
Veröffentlicht: (2024)

Features of formation micromechanical characteristics of composite pstm system &quot;wurtzite boron nitride – diamond&quot;
von: V. M. Volkogon, et al.
Veröffentlicht: (2016)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
von: Osipov, A.S., et al.
Veröffentlicht: (2016)

On twinning in ultrahard nanocrystalline cubic boron nitride
von: V. L. Solozhenko, et al.
Veröffentlicht: (2020)

Physico-chemical and mechanical properties of organic-inorganic composites
von: H. I. Khovanets, et al.
Veröffentlicht: (2015)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
von: A. S. Osipov, et al.
Veröffentlicht: (2016)

Physico-mechanical properties of composite diamond-containing materials based on Fe‒Cu–Ni–Sn‒VN matrices, sintered by vacuum hot pressing
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Titanium and vanadium in steels for nitriding
von: O. V. Bilotskyi, et al.
Veröffentlicht: (2013)

Production and properties of hot-pressed materials based on silicon carbide with additions of boron and titanium carbides
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2016)

Influence of different types of the boron on the processes of TiN—TiB2 composition synthesis by the method of reactionary electric discharge sintering
von: A. S. Petukhov, et al.
Veröffentlicht: (2014)

Tribological characteristics of superhard materials cubic boron nitride
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015)

Study of granular steelmaking wastes as part of sinter burden composition effect on indexes of sintering process and sinter qualit
von: V. I. Bolshakov, et al.
Veröffentlicht: (2013)

The effect of high pressures and high temperatures on the properties of aluminum nitride
von: V. S. Urbanovich, et al.
Veröffentlicht: (2015)

Physico-mechanical properties of WC‒Co‒CrB2-matrices of composite diamond-containing materials sintered by vacuum hot pressing for drilling tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Effect of deformation and crystal size of mechanically alloyed and tempered composite tungsten powders with titanium additives on the sintering process
von: Jahangiri, H., et al.
Veröffentlicht: (2018)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

Physico-chemical principles of synthesis and properties of epoxy-polyaniline composites
von: V. Zakordonskyi, et al.
Veröffentlicht: (2014)

On the mechanism of hardening wurtzitic boron nitride under an indenter
von: G. S. Olejnik
Veröffentlicht: (2013)