Electrical resistivity of pressureless sintered aluminum nitride based composite with addition of nanosized silicon carbide

Electrical resistivity of pressureless sintered aluminum nitride based composite with addition of nanosized silicon carbide

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	I. P. Fesenko, O. O. Bochechka, L. O. Romanko, T. B. Serbeniuk, O. M. Kaidash, S. V. Tkach, Ye. F. Kuzmenko, V. I. Chasnyk, M. P. Hadzyra, N. K. Davydchuk
Format:	Artikel
Sprache:	English
Veröffentlicht:	2017
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001084135
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Electric-physical characteristics of pressureless sintered AlN–TiN ceramic composite
von: I. P. Fesenko, et al.
Veröffentlicht: (2022)

Influence of sintering temperature on volume electric resistance and absorption of electromagnetic energy of pressureless sintered AlN–SiC composites
von: V. I. Chasnyk, et al.
Veröffentlicht: (2022)

Microstructural characteristics and thermal conductivity of large-size parts from pressureless sintered ceramic AlN-base composite
von: D. V. Chasnyk, et al.
Veröffentlicht: (2023)

High absorption of microwave radiation in pressureless sintered AlN–SiC composite in the frequency range 9.5–34.2 GHz
von: V. I. Chasnyk, et al.
Veröffentlicht: (2022)

Theoretical and experimental estimations of the dielectric permittivity of AlN–Mo pressureless sintered compositesat the frequencies of 3.2–10.0 GHz
von: V. I. Chasnyk, et al.
Veröffentlicht: (2017)

Studies of the ceramic material produced by pressureless sintering from the AlN–Y2O3–(Si–C) powder composition using electron microscopy, Raman spectroscopy and measurements of the thermal conductivity and microwave radiation
von: I. P. Fesenko, et al.
Veröffentlicht: (2015)

Structure and current-voltage characteristics of islet gold films on high-heat conducting pressureless sintered AlN ceramics
von: I. P. Fesenko, et al.
Veröffentlicht: (2018)

Research of thermal conductivity, electrical resistivity and microwave absorption of microwave frequency radiation of AlN–Y2O3–Mo and AlN–Y2O3–TiN pressureless sintered composites
von: V. I. Chasnyk, et al.
Veröffentlicht: (2020)

Structure of gold islet films on thermobaric sintered cubic boron nitride
von: I. P. Fesenko, et al.
Veröffentlicht: (2020)

Investigation of the formation during sintering diamond-carbide plates with activation additions
von: V. Z. Turkevych, et al.
Veröffentlicht: (2017)

Microwave energy attenuators on the basis of aluminum nitride with high level of microwave energy absorption
von: V. I. Chasnyk
Veröffentlicht: (2014)

Influence of modification of the diamond nanoparticles surface by W-C bond on sintering and properties of nanocomposite diamond-tungsten carbide
von: O. O. Bochechka, et al.
Veröffentlicht: (2018)

Use of high-thermal conductive aluminum nitride based ceramics in vacuum UHF electronic devices
von: V. I. Chasnyk
Veröffentlicht: (2013)

Electrical characteristics of thermobaric sintered cBN–NbN composite
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2020)

Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2021)

Cubic boron nitride thermobaric sintering in occurrence of unstable nitrides based on chromium and iron
von: I. A. Petrusha, et al.
Veröffentlicht: (2016)

Production and properties of hot-pressed materials based on silicon carbide with additions of boron and titanium carbides
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2016)

Preventive action of silicon nitride at HT-HP sintering of cubic boron nitride
von: I. A. Petrusha, et al.
Veröffentlicht: (2015)

The structure, physical and mechanical properties of crystallizing systems linear polyethylene—nanosized carbides
von: V. P. Gordienko, et al.
Veröffentlicht: (2015)

Hardening foam glass finely reaction product of non-stoichiometric silicon carbide with metal oxides
von: M. P. Hadzyra, et al.
Veröffentlicht: (2014)

Structure peculiarities of cubic boron nitride polycrystals manufactured by direct conversion sintering
von: I. A. Petrusha, et al.
Veröffentlicht: (2017)

Effect of sintering temperature and applied pressure on the properties of boron carbide- silicon carbide composites
von: Ya. Z. Aygьzer, et al.
Veröffentlicht: (2021)

Mathematic modeling of diffusion processes of the formation of rim-core structure at sintering TiC–Ni alloys with alloying carbide additions
von: N. V. Lytoshenko
Veröffentlicht: (2016)

Producing by electron beam melting the ingots of iron alloyed with silicon carbide
von: S. V. Akhonin, et al.
Veröffentlicht: (2020)

High absorption of the microwave energy in a system with strongly elongated molybdenum grains in aluminum nitride matrix at frequencies of 9.5–10.5 GHz
von: V. I. Chasnyk
Veröffentlicht: (2012)

Microstructure and properties of aluminum composites with carbide-containing master alloy and titanium carbide prepared by hot-forging
von: Yu. O. Shyshkina, et al.
Veröffentlicht: (2018)

Heat conductivity, physico-mechanical properties and interrelations of them and structures of pressureless sintered composites produced of Si3N4–Al2O3–Y2O3(–ZrO2) nanodispersed system
von: O. N. Kajdash, et al.
Veröffentlicht: (2014)

Structure and properties of nitriding followed Ti-Al carbide BK8
von: V. H. Khyzhniak, et al.
Veröffentlicht: (2016)

Formation of the electrophysical properties of the polycrystals during hpht sintering of conductive diamond powders
von: O. O. Bochechka, et al.
Veröffentlicht: (2016)

Oxidation of aluminum in the presence of nanodiamond additives
von: G. K. Burkat, et al.
Veröffentlicht: (2017)

Modelling of carbides and nitrides formation in microalloyed steel. Forecasting of influence of deviations of Al, Ti and Nb concentrations on carbides and nitrides precipitation in steel. Conferring 2
von: A. I. Trotsan, et al.
Veröffentlicht: (2014)

Boron, aluminum, nitrogen, oxygen impurities in silicon carbide
von: Vlaskina, S.I., et al.
Veröffentlicht: (2007)

The synthesis of chromium carbide with use of automotive tire rececling product
von: M. O. Pinchuk, et al.
Veröffentlicht: (2018)

Production of polycrystalline materials by sintering of nanodispersed diamond nanopowders at high pressure. Review
von: O. O. Bochechka
Veröffentlicht: (2018)

Mechanism of compacting the diamond nanopowder of detonation synthesis at its high pressure sintering
von: O. O. Bochechka
Veröffentlicht: (2017)

The effect of high pressures and high temperatures on the properties of aluminum nitride
von: V. S. Urbanovich, et al.
Veröffentlicht: (2015)

Optimisation of properties of silicon carbide ceramics with the use of different additives
von: Lobach, K., et al.
Veröffentlicht: (2018)

Saturation of capillary pores in silicon carbide briqettes with liquid-phase carbon-containing solutions before the reaction-sintering
von: V. G. Kulich, et al.
Veröffentlicht: (2016)

Effect of functional cover of particles of diamond nanopowders on sintering nanocomposites "diamond - tungsten carbide"
von: T. O. Kuryliak
Veröffentlicht: (2016)

Structure of aluminum nitride layers formed under ion-plasma spraying
von: Z. A. Duriahina, et al.
Veröffentlicht: (2013)