The improvement of diamond tool production technology on the basis of modeling of metal distribution during metal-composite layers electroforming process

The improvement of diamond tool production technology on the basis of modeling of metal distribution during metal-composite layers electroforming process

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	Yu. Ushchapovskyi, O. V. Liniucheva, R. M. Redko, V. I. Lavrinenko, Yu. P. Ushchapovskyi
Format:	Artikel
Sprache:	English
Veröffentlicht:	2017
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001084167
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

On theoretical substantiation of the choice of effective grain profile shape in modeling of diamond layer in dressing tools. Part 2. Electroforming
von: M. N. Shejko
Veröffentlicht: (2017)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

CVD diamonds in diamond tools: features and properties, features of processing and application in modern diamond tools (Review)
von: V. I. Lavrinenko
Veröffentlicht: (2022)

Improvement of the operational properties of diamond-rubber composites by the introduction of metal complex compounds - sources of ultrafine oxides
von: V. M. Bychykhin, et al.
Veröffentlicht: (2018)

Effect of the contact conductivity of the diamond–metal binder interface on the thermal conductivity of diamond-containing composites
von: R. S. Shmehera, et al.
Veröffentlicht: (2015)

Metal binder based on nickel for an intensive electrosintering of diamond_containing composites
von: R. S. Shmehera, et al.
Veröffentlicht: (2014)

Metal binder based on nickel for an intensive electrosintering of diamond_containing composites
von: R. S. Shmehera, et al.
Veröffentlicht: (2014)

Peculiarities of producing layered metal composite materials on aluminuim base
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2020)

Effect of the diamond-metal binder interface on the thermal expansion coefficient and wear resistance of electrosinted diamond composites
von: A. S. Bieliaiev, et al.
Veröffentlicht: (2018)

Arc surfacing of layers of metal of varying composition and hardness
von: V. V. Peremitko, et al.
Veröffentlicht: (2017)

Shear-induced metallization on (001) and (111) surfaces of diamond during hardness tests
von: S. M. Dub, et al.
Veröffentlicht: (2021)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Composites based on cBN micron powders structured by carbon binder for the application as functional elements in the working layer of diamond–abrasive tools. Part 1. Composite grits as abrasive elements
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2014)

Features of the structural organization of a single-layer diamond-galvanic coating for the ruling tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2021)

On the formation of metal interlayers in diamond–(Ti,W)C–WC–Co composite
von: S. A. Davydenko
Veröffentlicht: (2020)

Thermodynamic study of the doping of the diamond–WC–Co composition with silicides of transition metals
von: A. F. Lisovskij, et al.
Veröffentlicht: (2012)

Corrosion resistance of bright nickel coatings in acetic acid vapor
von: Yu. Ushchapovskyi, et al.
Veröffentlicht: (2019)

Estimation of the quality of coatings of metalized grinders of synthetic diamond
von: E. A. Pashchenko, et al.
Veröffentlicht: (2017)

A study of the influence of natural diamond ultrafine powders on the properties of metal matrix composites
von: M. N. Safonova, et al.
Veröffentlicht: (2018)

Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool
von: T. O. Prikhna, et al.
Veröffentlicht: (2022)

Improving efficiency of finishing natural stone using diamond–polymer fiber tools
von: V. D. Kurilovych, et al.
Veröffentlicht: (2014)

Pressure-induced metallization of diamond at room temperature
von: S. M. Sichkar
Veröffentlicht: (2020)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 1. Superabrasive composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Tribologic properties of combined metal-oxidoceramic layers on light metals
von: M. M. Student, et al.
Veröffentlicht: (2012)

Intensity of wear of functional elements made of diamond-containing composite materials during the operation of tools in the process of rock destruction
von: A. L. Maistrenko, et al.
Veröffentlicht: (2023)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

Investigation of diamond/metallic film interface and valence electron structure analysis of diamond growth
von: B. Tian, et al.
Veröffentlicht: (2024)

Influence of macrostructure of diamond-containing composite materials on cutting capacity of the tool
von: A. M. Kuzej, et al.
Veröffentlicht: (2018)

Evaluation of diamond-coated tools in drilling high-strength CFRP composites
von: J. Xu, et al.
Veröffentlicht: (2022)

Development of chemical composition and improvement of production technology to improve operational reliability and durability of rail metal products
von: O. I. Babachenko, et al.
Veröffentlicht: (2019)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 2. Water freezing in porous space of superabrasive composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Phase composition of metals electrocrystallized on solid and liquid metal cathodes of the same chemical composition
von: O. B. Hirin, et al.
Veröffentlicht: (2017)

Features of the formation of surface layers on metals
von: O. Hertsyk, et al.
Veröffentlicht: (2022)

Two-layer pcbn composites for use in a tool
von: M. P. Bezhenar, et al.
Veröffentlicht: (2018)

Co-crystallization of filamentous and globular carbon on diamond and cBN during production of composite abrasive thermostable powders intended for grinding tools
von: V. G. Poltoratskij
Veröffentlicht: (2019)

Calculated-experimental model of distribution of non-metallic inclusions in the metal of welds by sizes
von: L. A. Taraborkin, et al.
Veröffentlicht: (2021)

Current advances in the development of abrasive tools and investigation of diamond abrasive machining processes (materials science approach). Review
von: V. I. Lavrinenko
Veröffentlicht: (2018)

Effects of sintering temperature and addition of Fe and B₄C on hardness and wear resistance of diamond reinforced metal matrix composites
von: Şimşir, M., et al.
Veröffentlicht: (2013)

Influence of the Adsorptive Layer of Metal Particles on Their Polarizability and Light Scattering
von: Yu. Hryshchuk, et al.
Veröffentlicht: (2014)

Metal structure control during solidification
von: V. A. Shapovalov, et al.
Veröffentlicht: (2015)