Buchumschlag

High-temperature creep of hard-alloy samples that are sintering under the conditions of uniaxial compression

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	V. P. Bondarenko, S. I. Shestakov, M. O. Yurchuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001084173
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The effect of the duration of external uniaxial compression on the density of hard alloys VK20 and VN20 during their final sintering in vacuum
von: V. P. Bondarenko, et al.
Veröffentlicht: (2019)

The research results of influence conditions of sintering of VN20 (80% WC + 20 % WT. NI) hard alloy in vacuum under external uniaxial static pressure on its shrinkage and density
von: V. P. Bondarenko, et al.
Veröffentlicht: (2017)

The use of the computer modeling for improving operational characteristics of hard-alloy matrices of high-pressure apparatuses intended for sintering diamond-hard alloy plates
von: S. I. Shestakov, et al.
Veröffentlicht: (2017)

Hydrogen influence on the durability of a thin-walled sample under high-temperature creep
von: O. Y. Chepil
Veröffentlicht: (2024)

The mechanical characteristic of rock salt under uniaxial compression with low temperature effect
von: Jie Chen, et al.
Veröffentlicht: (2016)

Using of modelling for minimization of temperature drop in B4C-sample during high-speed sintering under pressure
von: V. A. Dutka, et al.
Veröffentlicht: (2019)

Models of Long-Term Brittle Fracture of Rods under Tension and Compression in Condition of Creep
von: Ju. M. Kobzar
Veröffentlicht: (2017)

The influence of the rate of increase in gas pressure during vacuum-compression sintering on the structure and properties of VK6M hard alloy
von: M. M. Prokopiv, et al.
Veröffentlicht: (2023)

The influence of design parameters of a production unit on the temperature differential in a sample during high-speed sintering under pressure
von: V. A. Dutka, et al.
Veröffentlicht: (2019)

High-temperature creep testing of difficult-to-weld nickel-based superalloy samples with micro-plasma powder deposition
von: O. V. Yarovytsyn, et al.
Veröffentlicht: (2024)

Estimation of anisotropy of mechanical properties in Mg alloys by means of compressive creep tests
von: Dobes, F., et al.
Veröffentlicht: (2008)

Growth of high temperature creep cracks in metallic materials under hydrogen effect
von: Ye. Andreikiv, et al.
Veröffentlicht: (2014)

High temperature creep crack growth in metals under neutron irradiation (Review)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2015)

Influence of copper additives and copper-titanium alloy for consolidation diamond powder when sintered under high pressure and high temperature
von: E. M. Lutsak, et al.
Veröffentlicht: (2017)

Fatigue of sintered porous materials based on 316L stainless steel under uniaxial loading
von: A. Falkowska, et al.
Veröffentlicht: (2015)

The role of interstitial (crowdion) mass-transfer for crack high-temperature healing under uniaxial loading
von: Volosyuk, M.A., et al.
Veröffentlicht: (2015)

Analysis of the influence of high pressures and temperatures on the formation of the structure and properties of hard alloys such as WC–Co
von: I. O. Hnatenko, et al.
Veröffentlicht: (2021)

Effect of Platen Restraint on Stress–Strain Behavior of Concrete under Uniaxial Compression: A Comparative Study
von: Kumar, S., et al.
Veröffentlicht: (2016)

Finite element simulation of hydrogen influence on the accumulation of damages in the steels under high-temperature creep
von: Jiang Qiongqin, et al.
Veröffentlicht: (2019)

Diffusion under the Action of Shock Compression and Alternating Electric Current at High Temperatures
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2014)

The limiting state parameters of rock specimen at uniaxial compression by rigid stamps
von: Ja. Lokshina, et al.
Veröffentlicht: (2012)

Birefringence properties of uniaxially compressed K2SO4 crystals
von: Yo. Stadnyk, et al.
Veröffentlicht: (2013)

Birefringence properties of uniaxially compressed K2SO4 crystals
von: V. Y. Stadnyk, et al.
Veröffentlicht: (2013)

Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
von: T. Lagoda, et al.
Veröffentlicht: (2017)

Influence of high pressure and temperature on the structure and properties of the WC–6 Co hard alloy
von: I. V. Andreiev, et al.
Veröffentlicht: (2018)

Formation mechanisms and geometry of the crack assemble formed under uniaxial cyclic compression of NaCl single crystals
von: Boyko, Yu.I., et al.
Veröffentlicht: (2012)

Interface model of low temperature plasticity in high uniaxially strained monocrystalline semiconductors
von: Venger, Ye.F., et al.
Veröffentlicht: (2000)

Peculiarities of high-temperature plastic straining anisotropy in with NaCl type single crystals in creep conditions
von: Matsokin, D.V., et al.
Veröffentlicht: (2005)

Sintering of superhard instrumen talpurpose composites of the BL group in the cBN—NbC—Al system under high pressure and high temperature conditions
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)

Prediction of stress corrosion cracking of structures subjected to high-temperature creep
von: O. K. Morachkovskij, et al.
Veröffentlicht: (2010)

Strain hardening and microstructure evolution during uniaxial compression of ultrafine grained zirconium in temperature range 4.2–300 K
von: A. V. Podolskij, et al.
Veröffentlicht: (2011)

On the Strength and Crack Propagation Process of the Pre-C.&#039;racked Rock-Like Specimens under Uniaxial Compression
von: H. Haeri, et al.
Veröffentlicht: (2014)

Formation of the phase composition and microstructure of Tungsten free hard alloys with nickel molybdenum binder in the sintering process
von: A. M. Stepanchuk, et al.
Veröffentlicht: (2018)

Investigation of deep penetration conditions when making samples from high-temperature alloy Inconel 718 by the method of selective laser melting
von: S. V. Adzhamskij, et al.
Veröffentlicht: (2019)

Electric transport and pseudogap in high-temperature superconducting compounds of system 1-2-3 under conditions of all-round compression
von: R. V. Vovk, et al.
Veröffentlicht: (2018)

Temperature effect on light polarization in uniaxial crystals
von: Kulish, M.R., et al.
Veröffentlicht: (2016)

Temperature effect on light polarization in uniaxial crystals
von: M. R. Kulish, et al.
Veröffentlicht: (2016)

Compressive creep of Fe3Al-type iron aluminide with Zr additions
von: Dobes, F., et al.
Veröffentlicht: (2008)

Transformations during liquid-phase sintering of high-speed alloy powders
von: O. V. Movchan, et al.
Veröffentlicht: (2019)

Theoretical study of particular qualities of changing the outrunning at rolling with higher compressions in hard friction conditions
von: Ja. D. Vasilev
Veröffentlicht: (2018)