Buchumschlag

Analysis of cutting edge wear during drilling composite materials

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	L. N. Devin, A. I. Grechuk, M. L. Gaevskij
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001084182
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Drilling of composites using tools of polycrystalline superhard materials
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Application of acoustic emission in the study of drilling composite materials
von: L. N. Devin, et al.
Veröffentlicht: (2016)

Justification of the wear – out rate of drilling tool by the nature of destruction of matrix of diamond – composit material
von: O. P. Vynohradova, et al.
Veröffentlicht: (2016)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

The analysis of products of wear of diamond - containing composite material
von: O. P. Vynohradova, et al.
Veröffentlicht: (2019)

Analysis of Cutting Surface During Cutting of Electric Sheets
von: Spišák, E., et al.
Veröffentlicht: (2017)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2012)

Drilling carbide rock cutting tool of a new type
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)

Comparison of results of the determination of the stresses on the cutting edges from diamond monocrystals by analytic 2-D and 3-D by the finite element method
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Character of wear of synthetic diamonds differentstrength in impregnated drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2018)

Axial force when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Analysis and estimation of effectiveness of decisions during drilling wells
von: G. M. Efendiev, et al.
Veröffentlicht: (2017)

Peculiarities of wear and development of repair technology of drill bits
von: B. V. Stefaniv
Veröffentlicht: (2024)

Analysis of the fractional composition of the dust of the working area when drilling composite materials based on carbon fibers
von: Chencheva, Olga O.
Veröffentlicht: (2023)

Investigation of the Wear of the Metallic Part of Electrode System of Electrohydraulic Drill
von: K. Kusaiynov, et al.
Veröffentlicht: (2015)

Plasma hardening of cutting edges of soil-cultivating tool
von: S. S. Samotugin, et al.
Veröffentlicht: (2009)

Cutting-edge industrial technology of mining tool manufacturing
von: Savchenko, Iu., et al.
Veröffentlicht: (2016)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

Effective rock cutting tool for drilling small diameter for oil and gas
von: Ju. E. Budjukov, et al.
Veröffentlicht: (2016)

Friction and Wear Behavior of Wear-Resistant Belts in Drill Joints for Deep and Ultra-Deep Wells
von: Zhang, K., et al.
Veröffentlicht: (2018)

Novel wear-resistant superhard diamond composite polycrystalline material
von: A. A. Shulzhenko, et al.
Veröffentlicht: (2018)

Assessment of wear resistance of a core drilling bit with hybridite reinforcing inserts
von: M. V. Suprun, et al.
Veröffentlicht: (2015)

Investigation of acoustic emission signal on the stage of penetretion and exit when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2022)

Intensity of wear of functional elements made of diamond-containing composite materials during the operation of tools in the process of rock destruction
von: A. L. Maistrenko, et al.
Veröffentlicht: (2023)

Analysis of materials and modern technologies for PDC drill bit manufacturing
von: Ya. Ropyak, et al.
Veröffentlicht: (2020)

Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Structural approach to the development of wear_resistant composite materials
von: E. V. Sukhovaja
Veröffentlicht: (2013)

Influence of macrostructure of diamond-containing composite materials on cutting capacity of the tool
von: A. M. Kuzej, et al.
Veröffentlicht: (2018)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
von: K. O. Diadiura, et al.
Veröffentlicht: (2015)

Cutting section parametrs for oblique fine turning with a radius tool
von: L. M. Devin, et al.
Veröffentlicht: (2019)

Application of Fe–P–B alloys in developing wear-resistant composite materials
von: I. M. Spyrydonova, et al.
Veröffentlicht: (2013)

Temperatures during the dry cutting of titanium alloy using diamond composites with ceramic bonding phases
von: L. Jaworska, et al.
Veröffentlicht: (2017)

Temperatures during the dry cutting of titanium alloy using diamond composites with ceramic bonding phases
von: Jaworska, L., et al.
Veröffentlicht: (2017)

The efficiency of destruction of rocks during drilling with pulse washing
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)

Development prospects of the cutting material on TiB2-TiN composition basis
von: A. S. Petukhov, et al.
Veröffentlicht: (2012)

Elastic properties and plasticity of the polycrystals and cutting composite materials on a base of cubic boron nitride
von: O. I. Zaporozhets, et al.
Veröffentlicht: (2019)

Effect of hydrostatic pressure on the energy expenditure during drilling
von: O. A. Pashchenko
Veröffentlicht: (2016)