Composition, structure and technology for producing electrode materials for electric spark restoration and strengthening of worn-out parts

Composition, structure and technology for producing electrode materials for electric spark restoration and strengthening of worn-out parts

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	A. V. Paustovskij, Ju. G. Tkachenko, R. A. Alfintseva, D. Z. Jurchenko, V. G. Khristov
Format:	Artikel
Sprache:	English
Veröffentlicht:	2016
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000506847
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Application of friction stir welding method for repair and restoration of worn-out copper plates of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Restoration of worn helical coarse pitch gears by electroslag cladding
von: S. M. Kozulin, et al.
Veröffentlicht: (2021)

Surface strengthening of 40X steel by electric spark alloying
von: S. I. Kryshtopa, et al.
Veröffentlicht: (2017)

Electric spark alloying with ZrN-based electrode material
von: Paustovsky, A.V., et al.
Veröffentlicht: (2006)

Peculiarities of repair of worn areas of drill bit bodies
von: B. V. Stefaniv
Veröffentlicht: (2020)

Spark treatment of VT22 alloy by chromium and tungsten electrode materials
von: O. V. Paustovskyi, et al.
Veröffentlicht: (2011)

Composition, structure and properties of electric spark and laser-spark ZrB2-containing coatings on titanium alloys
von: V. M. Panashenko
Veröffentlicht: (2014)

Electric-spark alloying of metal surfaces with graphite
von: V. B. Tarelnyk, et al.
Veröffentlicht: (2022)

Aluminizing of metal surfaces by electric-spark alloying
von: V. B. Tarelnyk, et al.
Veröffentlicht: (2023)

New electrodes for restoration hard-facing of railway frogs
von: I. K. Pokhodnja, et al.
Veröffentlicht: (2013)

Investigation of structure and service properties of deposited metal for restoration and strengthening of mill rolls
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2010)

Heat-resistance of spark coatings Ni – Cr – Al – Y alloys system
von: O. V. Paustovskyi, et al.
Veröffentlicht: (2015)

Influence of electric-spark alloying by graphite on element composition of titanium and copper substrates
von: V. F. Mazanko, et al.
Veröffentlicht: (2015)

Features of formation of coates at electric spark alloying of iron and copper
von: K. M. Khranovska, et al.
Veröffentlicht: (2010)

Strategic priorities for the restoration of the alcohol industry in the context of strengthening Ukrainian energy security
von: Yu. Luchechko
Veröffentlicht: (2018)

Worked-out mines ecological restoration via building thermal solar power plants
von: E. V. Burkova, et al.
Veröffentlicht: (2012)

Development of technologies and materials for electric spark coating with the aim of increasing service life and reliability of parts of technological and power equipment and tools
von: M. S. Storozhenko, et al.
Veröffentlicht: (2020)

Optical emission spectroscopy of plasma of underwater electric spark discharges between metal granules
von: Tmenova, T.A., et al.
Veröffentlicht: (2017)

Development of new electrode materials, methods of restoration and protection of thin-walled parts of equipment, which are operated in the conditions of gas abrasive wear
von: M. M. Student, et al.
Veröffentlicht: (2020)

Development of a combined technology for parts strengthening
von: A. D. Grishkevich
Veröffentlicht: (2017)

Effect of Electric-Spark Dispergation on Magnetic and Electrical-Transport Properties of Heusler Cu—Mn—Al Alloy
von: V. M. Nadutov, et al.
Veröffentlicht: (2014)

Micromechanical characteristics of the surface layer of 45 steel after electric-spark treatment
von: V. M. Holubets, et al.
Veröffentlicht: (2019)

Effect of ZrO2 content on the strength characteristics of the matrix material of Cdiamond–(WC–Co) composites produced by spark plasma sintering
von: B. T. Ratov, et al.
Veröffentlicht: (2024)

Plasma of electric arc between electrodes from composite materials
von: Babich, I.L., et al.
Veröffentlicht: (2008)

Plasma of electric arc between composite electrodes on silver base
von: Babich, I.L., et al.
Veröffentlicht: (2010)

Producing of consumable electrodes of spongy titanium for remelting in skull foundry furnaces
von: V. S. Konstantinov, et al.
Veröffentlicht: (2009)

Restoration surfacing of parts of titanium alloy VT22
von: V. P. Prilutskij, et al.
Veröffentlicht: (2017)

Capacity transduser of efforts in turbogenerator stator tighting prisms core with compensation of influence of out-of-parallelism electrodes
von: A. S. Levitskij, et al.
Veröffentlicht: (2017)

Surrent state and prospects for application of a high power electron beam technology to produce metallic and nonmetalic components for electric contacts and electrodes
von: N. I. Grechanyuk, et al.
Veröffentlicht: (2014)

Stochastic transition processes in the circuits of the discharge pulses shaper, operating for electric spark load
von: N. I. Suprunovskaja
Veröffentlicht: (2019)

Method and estimation of parameters of dense part of electrical double layer at the interface electrode-solution of the dye in liquid crystal
von: O. V. Kovalchuk
Veröffentlicht: (2011)

Method and estimation of parameters of dense part of double electrical layer at the interface electrode-solution of the dye in liquid crystal
von: Kovalchuk, O.V.
Veröffentlicht: (2011)

Strengthening the Positions of Ukrainian Dairy Producers in Foreign Markets in the Context of Adaptability of Enterprises of the Branch
von: N. V. Vasiutkina, et al.
Veröffentlicht: (2018)

Peculiarities of electric arc discharge between composite electrodes Cu-C
von: A. M. Veklych, et al.
Veröffentlicht: (2016)

Investigation of electric ARC plasma between composite Cu–C electrodes
von: Veklich, A.N., et al.
Veröffentlicht: (2013)

The transport of the erosion products of electrodes in electric arcs
von: Zhovtyansky, V.A.
Veröffentlicht: (2003)

Сurrent state and prospects for application of a high power electron beam technology to produce metallic and nonmetalic components for electric contacts and electrodes
von: Grechanyuk, N.I., et al.
Veröffentlicht: (2014)

Structure of Cdiamond–(WC–6Co)–ZrO2 composite materials formed by electric plasma-spark sintering
von: V. A. Mechnyk, et al.
Veröffentlicht: (2022)

Thermal radiation in spark discharge
von: Korytchenko, K., et al.
Veröffentlicht: (2021)

The research of the electrical properties of thick-film electrodes on piezoceramics in special conditions
von: Ja. Telnikov, et al.
Veröffentlicht: (2019)