Buchumschlag

Alloy based on iron for plasma-powder surfacing of screws for extruders and injection molding machines

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
1. Verfasser:	A. I. Som
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2016
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000530637
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Repair of screws of extruders and automatic molding machines by plasma-arc surfacing
von: A. I. Som
Veröffentlicht: (2019)

Distribution and geometrical characteristics of pores and strength properties of the extrudate obtained in the twin screw extruder process
von: A. Tor-Sviatek, et al.
Veröffentlicht: (2013)

Plasma-powder surfacing of composite alloys with separate feed of tungsten carbides and matrix alloy
von: A. I. Som, et al.
Veröffentlicht: (2020)

Properties of iron-base alloys for plasma-powder cladding of sealing surfaces of different-application fittings
von: E. F. Perepletchikov, et al.
Veröffentlicht: (2011)

Phase transformations in the extruded brazing copper based alloys
von: V. K. Nosenko, et al.
Veröffentlicht: (2015)

Numerical calculation of heat processes in centrifugal plasma-powder surfacing
von: A. I. Som, et al.
Veröffentlicht: (2010)

Effect of scheme of powder feeding into arc on its losses and efficiency of plasma-power surfacing process
von: A. I. Som
Veröffentlicht: (2015)

The surface thermal treatment of powder iron-carbon alloys
von: A. V. Minitskyi, et al.
Veröffentlicht: (2015)

Plasma-powder surfacing of nickel and cobalt alloys on copper and its alloys
von: E. F. Perepletchikov
Veröffentlicht: (2015)

Improvement of wear resistance of low-alloyed structural steel by its plasma-powder overlaying with the alloys based on iron, chromium and nickel
von: Ye. F. Pereplotchikov, et al.
Veröffentlicht: (2018)

In-mold graphitizing modification of iron
von: M. A. Fesenko, et al.
Veröffentlicht: (2015)

Kinetics of the Crystallization Front of Iron-Carbon Alloys in Mold Cylindrical Forms
von: O. D. Semenov, et al.
Veröffentlicht: (2021)

Effect of contact surface condition on the adhesion strength of interconnect layers of thermoelements based on extruded bismuth telluride
von: A. V. Simkin, et al.
Veröffentlicht: (2012)

Technology of blast furnace melting with simultaneous injection of powder coal and iron oxides into the furnace hearth
von: V. N. Zakharchenko, et al.
Veröffentlicht: (2018)

Effect of time of surface heat treatment and structure of powder iron-carbon alloys
von: A. V. Minitskyi, et al.
Veröffentlicht: (2016)

Modifiers based on ultra- and nanodisperse powder materials for iron-carbon alloys
von: A. M. Verkhovljuk, et al.
Veröffentlicht: (2018)

Improvement of equipment and technology of injection molding for production of thin-walled castings
von: T. V. Lysenko, et al.
Veröffentlicht: (2018)

Centrifugal plasma surfacing of drill pump bushings
von: O. I. Som
Veröffentlicht: (2022)

Matching of extruded materials based on bismuth-antimony chalcogenides for a thermoelement
von: V. A. Barabash, et al.
Veröffentlicht: (2014)

Pulse Plasma-Chemical Synthesis of Nanodispersed Iron-Based Powders, Their Phase Composition, and Magnetic Properties
von: A. E. Perekos, et al.
Veröffentlicht: (2013)

Dynamic model of an iterative electric feed drive with two screw gears for precision machine tools and machining centers
von: O. A. Khudiayev, et al.
Veröffentlicht: (2024)

Low-temperature micromechanical properties of annealed and hydrostatic extruded Al–3.8 at.% Li alloy
von: A. V. Rusakova, et al.
Veröffentlicht: (2014)

Screw-Type Symmetry in Machine Components and Design at Implementation on a 3D Printer
von: Sheyko, T. I., et al.
Veröffentlicht: (2019)

Screw-Type Symmetry in Machine Components and Design at Implementation on a 3D Printer
von: Sheyko, T. I., et al.
Veröffentlicht: (2019)

Screw-Type Symmetry in Machine Components and Design at Implementation on a 3D Printer
von: T. I. Sheyko, et al.
Veröffentlicht: (2019)

Composition optimization for the adhesive of cold application extruded coating
von: L. M. Shkaraputa, et al.
Veröffentlicht: (2012)

Application of powders of cobalt and nickel alloys for plasma surfacing of exhaust valves of internal combustion engines
von: E. F. Perepletchikov
Veröffentlicht: (2012)

Plasma-powder surfacing of rods of power stop valves
von: E. F. Perepletchikov, et al.
Veröffentlicht: (2013)

Special features of ductile iron casting into evacuated molds
von: V. S. Doroshenko, et al.
Veröffentlicht: (2015)

Injection moulding of products from nanodispersed powders of refractory compounds
von: V. V. Ivzhenko
Veröffentlicht: (2011)

Effect of tellurium on microstructure of low-alloyed cast iron deposited by electroslag method in current-carrying mold
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2019)

Gating system for the production of iron castings with a differentiated structure and properties on the modification of the base liquid iron directly in the mold
von: M. A. Fesenko, et al.
Veröffentlicht: (2018)

Peculiarities of the microstructure and properties of iron aluminide powders obtained by the method of plasma-arc spheroidization
von: L. I. Adeeva, et al.
Veröffentlicht: (2024)

Effect of dopants and heating temperatures on demagnetization and Curie point of thermomagnetic powder materials based on iron-nickel alloys
von: Ya. A. Sytnyk, et al.
Veröffentlicht: (2018)

Influence of process-dependent factors on structure and service properties of hot-extruded
von: L. V. Opryshko
Veröffentlicht: (2010)

Chemical processes when modifying cast iron by injection of magnesium
von: O. A. Mogilevtsev, et al.
Veröffentlicht: (2016)

Electric arc surfacing of wear-resistant iron- and nickel-based alloys on copper
von: I. O. Riabtsev, et al.
Veröffentlicht: (2022)

Production of Iron Castings with Gradient Structure for Special Purpose Equipment by In-Mold Modification of One Base Melt
von: D. V. Smernytskyi, et al.
Veröffentlicht: (2022)

Dependencies of discrete-additive formation of microvolumes of metal being solidified in multilayer micro-plasma powder surfacing of nickel alloys
von: K. A. Jushchenko, et al.
Veröffentlicht: (2016)

Advice on saving metal for casting ductile cast iron in sand molds
von: V. S. Doroshenko
Veröffentlicht: (2016)