Buchumschlag

Control of mechanical properties for higt strength steels through optimized welding processes

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	M. Fidler, A. Plotsner, B. Ruttsinger, V. Sherljajtner
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2016
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000530639
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Submerged-arc surfacing of higt-alloy steels by flux-cored wires
von: J.-M. Bonnel, et al.
Veröffentlicht: (2019)

Physico-mechanical properties of welded joints of high-strength steel with the yield strength of 690…1300 MPa
von: O. M. Berdnikova
Veröffentlicht: (2021)

Influence of thermal cycle of welding on structure and mechanical properties of HAZ metal in high-strength steel produced by controlled rolling
von: V. D. Poznjakov, et al.
Veröffentlicht: (2018)

Mechanical strength of the weld metal in CK45 carbon steel
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2020)

Compact low-impedance higt-current accelerator
von: Cherepenin, V.A., et al.
Veröffentlicht: (1999)

Higt-frequency electron guns – current status
von: Kushnir, V.A.
Veröffentlicht: (1999)

Mechanical properties and fracture behavior of high-strength steels
von: Musalek, R., et al.
Veröffentlicht: (2008)

Peculiarities of the effect of complex alloying on formation of structure and mechanical properties of welds in low-alloy high-strength steels
von: V. V. Golovko, et al.
Veröffentlicht: (2011)

Properties of weld metal of double-sided welded joints of pipes of microalloyed steel of increased strength
von: A. A. Rybakov, et al.
Veröffentlicht: (2013)

Higt-current non-relativistic electron beam generation and transport
von: Agafonov, A.V., et al.
Veröffentlicht: (1999)

Structural criteria of strength and crack resistance of high-strength steels and their welded joints
von: O. M. Berdnikova
Veröffentlicht: (2021)

The influence of welding energy on strength of high-strength S960QC steel joints
von: I. R. Dzioba, et al.
Veröffentlicht: (2019)

Operational Control as a Means of the Evaluation of Quality of Welded Connections for Flash-Butt Welding of Modern high-strength steels
von: S. I. Kuchuk-Yatsenko, et al.
Veröffentlicht: (2020)

Structure and properties of the heat effected zone of welded joints of special high – strength steels
von: H. M. Hryhorenko, et al.
Veröffentlicht: (2018)

Structure and service properties of welded joints of high-strength steels, aluminum and titanium alloys
von: L. I. Markashova, et al.
Veröffentlicht: (2017)

Effect of metal structure of high-strength steel welded joints produced using different methods of welding on their service properties
von: L. I. Markashova, et al.
Veröffentlicht: (2018)

Effect of titaniumcontaining inoculators on structure and properties of weld metals of high-strength low-alloy steels
von: V. V. Golovko, et al.
Veröffentlicht: (2015)

Optimization of process of strengthening of welded structures of steel 09G2S using the high-frequency mechanical peening
von: V. V. Knysh, et al.
Veröffentlicht: (2011)

Modelling of the process of induction heat treatment of welded joints from rail high-strength steels
von: R. S. Hubatiuk, et al.
Veröffentlicht: (2021)

Wet underwater welding of low-alloy steels of increased strength
von: Ju. Maksimov, et al.
Veröffentlicht: (2013)

Laser-arc welding of high-strength steels with yield strength of more than 700 MPa
von: V. D. Poznjakov, et al.
Veröffentlicht: (2015)

Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
von: Bang, HanSur, et al.
Veröffentlicht: (2015)

Effect of yttrium on redistribution of hydrogen and weld metal structure in welding of high-strength steels
von: I. K. Pokhodnja, et al.
Veröffentlicht: (2010)

Peculiarities of weld formation in electron-beam welding of high-strength steels of large thickness
von: Ja. Belenkij, et al.
Veröffentlicht: (2012)

“Electron-10” higt voltage accselerator for double-sided irradiation of flexible materials
von: Valtman, D.S., et al.
Veröffentlicht: (1999)

Influence of parameters of ultrasonic mechanical oscillations on the structure and mechanical properties of weld metal in laser welding of ferritic steels
von: V. V. Somonov
Veröffentlicht: (2017)

The influence of structural transformations on mechanical properties of welded joints of armoured steels
von: V. A. Kostin, et al.
Veröffentlicht: (2020)

Formation of cold cracks in welded joints of high-strength steels with 350-850 MPa yield strength
von: L. M. Lobanov, et al.
Veröffentlicht: (2013)

Risk of cold crack formation in welding of structural high-strength steels
von: V. I. Makhnenko, et al.
Veröffentlicht: (2009)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

Structural estimation of crack resistance of welded joints of high strength steels
von: E. N. Berdnikova
Veröffentlicht: (2013)

The Fatigue Strength of AISI 430—304 Stainless Steels Welded by CO₂ Laser Beam Welding
von: Caligulu, U., et al.
Veröffentlicht: (2015)

Numerical modeling and prediction of microstructure of welded joint metal in high-strength steel welding (Review)
von: Ju. Ermolenko, et al.
Veröffentlicht: (2014)

Multiple-wire submerged arc welding of high-strength fine-grained steels
von: S. Gook, et al.
Veröffentlicht: (2022)

Influence of pulsed-arc welding conditions on change of parameters of weld and haz of welded joints and mechanical properties of lowalloy steels
von: A. V. Zavdovieiev, et al.
Veröffentlicht: (2020)

Vacuum diffusion welding of stainless steel through porous nickel interlayers
von: A. I. Ustinov, et al.
Veröffentlicht: (2015)

The Fatigue Strength of AISI 430—304 Stainless Steels Welded by CO2 Laser Beam Welding
von: U. Caligulu, et al.
Veröffentlicht: (2015)

The effect of hydrogen sulfide on the corrosion and mechanical properties of pipe steel welded joints
von: H. V. Chumalo
Veröffentlicht: (2012)

Effect of welding heating on fatigue strength of hollow structures of highstrength fine-grain steels
von: K. Bruns, et al.
Veröffentlicht: (2013)