Buchumschlag

Prediction of limiting amplitudes of cycle of stresses of welded joints with steady-state residual stresses

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
1. Verfasser:	V. A. Degtjarev
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2016
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000589791
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Fatigue resistance of steel welded joints of different strength with final residual stresses
von: V. A. Degtjarev
Veröffentlicht: (2018)

Prediction of residual stresses after welding of duplex steel taking into account phase transformations
von: O. S. Kostenevych, et al.
Veröffentlicht: (2021)

Influence of parameters of electrodynamic treatment on residual stresses of welded joints of AMG6 alloy
von: L. M. Lobanov, et al.
Veröffentlicht: (2019)

Infuence of the ratio of dynamic and static stresses on brittle fracture resistance of low-alloyed steel welded joints
von: V. A. Degtjarev
Veröffentlicht: (2017)

Effect of residual stresses in welded joints of two-layer steels on in-service reliability of metal structures
von: V. V. Chigarev, et al.
Veröffentlicht: (2013)

Effect of vibrotreatment on fatigue resistance and damping capacity of structural elements with residual stresses
von: V. A. Degtjarev
Veröffentlicht: (2017)

Nondestructive evaluation of residual stresses in welded joints on the base of a combination of ultrasonic testing and speckle-interferometry
von: L. M. Lobanov, et al.
Veröffentlicht: (2023)

Residual stresses in thin-sheet zinc-coated steel joints after arc welding and plasma brazing
von: S. V. Maksymova, et al.
Veröffentlicht: (2020)

Effect of cooling mode after diffusion welding and brazing on residual stresses in graphite—copper edge joints
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2015)

Modeling of residual welding stresses, radiation swelling and stressed state of enclosure of the reactor VVER-1000 in the process of operation
von: O. V. Makhnenko, et al.
Veröffentlicht: (2016)

Mutual Effect of Stress Concentrators on the Face and Root Sides of Butt Welded Joint on the Stress State
von: A. V. Moltasov, et al.
Veröffentlicht: (2023)

Determination of stressed state in spiral welded joint in the main pipeline
von: L. Senkiv
Veröffentlicht: (2015)

Mathematical modeling of residual stresses in composite welded joints of WWER-1000 reactor vessel cover with CPS nozzles
von: A. A. Makarenko, et al.
Veröffentlicht: (2022)

Electrophysical Unsteady Processes in the System to Reduce Residual Stresses Welds
von: L. M. Lobanov, et al.
Veröffentlicht: (2016)

Influence of residual weld stresses on limiting equilibrium of a transversally isotropic cylindrical shell with internal crack of arbitrary configuration
von: B. I. Kindratskyi, et al.
Veröffentlicht: (2017)

Inside welds: advanced characterization of residual stresses by neutron diffraction
von: M. Rogante
Veröffentlicht: (2020)

Evaluation of thermal stressed state in welded joint of alloy Inconel 690
von: N. O. Chervjakov
Veröffentlicht: (2015)

Diagnostics of the stress-strain state of multi-layer ring welded joints of pipelines
von: Yu. V. Banakhevych, et al.
Veröffentlicht: (2014)

Influence of dimensions of weld convexity on stressed state of a butt joint in tension
von: G. V. Ermolaev, et al.
Veröffentlicht: (2014)

Investigation of stress-strain state of welded joints of intermetallics of the system TiAl
von: L. M. Lobanov, et al.
Veröffentlicht: (2019)

Residual stress management in welding: measurement, fatigue analysis and improvement treatments
von: Yu. Kudryavtsev, et al.
Veröffentlicht: (2013)

Widening of technological capabilities of explosion treatment for reduction of residual stresses in welded joints of decomposers of up to 5000 m3 volume
von: L. M. Lobanov, et al.
Veröffentlicht: (2009)

Experimental evaluation of pulse electric current effect on residual stresses in composite-to-copper joints
von: Stepanov, G.V., et al.
Veröffentlicht: (2008)

Stress-strain state of polymer pipe welded joints made by butt welding under angle
von: E. S. Nikonova, et al.
Veröffentlicht: (2009)

The Equivalent Amplitude Stress as a Solution of Mean Stress Effect Problem in Fatigue Analysis
von: T. Bednarek, et al.
Veröffentlicht: (2005)

Mathematical modeling of residual stresses in a composite welded joint of the collector adapter sleeve to the branch pipe of ZPM-440 steam generator
von: A. A. Makarenko, et al.
Veröffentlicht: (2023)

Calculation of parameters of explosion treatment for reduction of residual stresses in circumferential welds of pipelines
von: A. G. Bryzgalin
Veröffentlicht: (2013)

Residual stress calculationin the weld region during welding of thick plates by the electron-beam method
von: V. P. Skalskyi, et al.
Veröffentlicht: (2012)

Stress state in a butt welded joint considering a shift in inertia centers
von: A. V. Moltasov
Veröffentlicht: (2019)

Investigation and Characterization of Residual Stress on Prestressed Steel I-Beams Manufactured by Welding
von: A. Цzer, et al.
Veröffentlicht: (2015)

Modeling of residual stresses in the area of technological welds of PWR-1000 reactor shells
von: O. V. Makhnenko, et al.
Veröffentlicht: (2018)

Transient and steady-state dynamic stresses under antiplane strain of bodies with cracks
von: Ya. Soliar
Veröffentlicht: (2012)

Influence of stress-strain state on the structure and properties of joints in diffusion welding of dissimilar metals
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2014)

Evaluation of efficiency of reduction of residual stresses in circumferential joints of pipes using postweld explosion treatment
von: A. G. Bryzgalin
Veröffentlicht: (2014)

Modelling of the stress-strain state of heat-strengthened reinforcement and a welded joint by mictochardness
von: Ya. Z. Blikharskyi
Veröffentlicht: (2021)

Residual structural stresses in glass bodies
von: S. F. Budz, et al.
Veröffentlicht: (2014)

Limitation of excessive stresses in high- voltage circuits after discharges in welding gun
von: O. K. Nazarenko, et al.
Veröffentlicht: (2011)

Mathematical model of determination of residual stresses and strains in friction stir welding of aluminium alloy
von: B. R. Tsaryk, et al.
Veröffentlicht: (2022)

General approach to modeling and determination of the residual stresses
von: M. M. Nykolyshyn, et al.
Veröffentlicht: (2015)

Efficiency of different methods of strengthening treatment of welded joints
von: V. A. Degtjarev
Veröffentlicht: (2017)