Buchumschlag

Deposition of protective coatings on copper panels of MCCB moulds by autovacuum brazing method

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	M. A. Poleshchuk, M. G. Atroshenko, A. V. Shevtsov, A. L. Puzrin
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2016
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000589795
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Autovacuum brazing in repair of copper panels of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Evaluation of feasibility of producing of full-strength joint of large steel parts using method of autovacuum brazing of threaded profile
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2014)

Properties of steel-copper bimetal produced by brazing in autonomous vacuum
von: I. P. Serebrjanik, et al.
Veröffentlicht: (2018)

Restoration repair of slab copper moulds of MCCB. Structure and properties of metal in the joint zone
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Application of friction stir welding method for repair and restoration of worn-out copper plates of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Restoration of surface layer of MCCB mould copper plate by using plasma-arc technology
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2015)

Physical and mechanical properties of transition zone of bimetal produced by autonomous vacuum brazing of copper on steel
von: M. G. Atroshenko, et al.
Veröffentlicht: (2015)

On the problem of selection of materials for water-cooled moulds of ESR and MCCB
von: L. B. Medovar, et al.
Veröffentlicht: (2017)

Effect of technological parameters on sizes of molten metal pool in plasma-arc surfacing of copper plates of MCCB moulds
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2015)

Effect of high-temperature heating on properties of steels in brazing of composite high-pressure stop valve bodies
von: G. M. Grigorenko, et al.
Veröffentlicht: (2012)

Bimetal materials and products manufactured by the method of high-temperature non-capillary brazing
von: G. M. Grigorenko, et al.
Veröffentlicht: (2011)

Characteristics of formation and properties of brass-steel joint produced by autovacuum cladding
von: I. P. Serebrianyk, et al.
Veröffentlicht: (2022)

Possibility of reduction in growth of intermetallic interlayer during brazing of steel using brazing alloys copper-phosphorus
von: A. A. Pisarev, et al.
Veröffentlicht: (2016)

About the possibility of brazing of niobium to alumina VK94-1 ceramics by copper and copper-nickel brazing fillers without applying pressure
von: V. S. Zhuravlev
Veröffentlicht: (2015)

Phase transformations in the extruded brazing copper based alloys
von: V. K. Nosenko, et al.
Veröffentlicht: (2015)

Mechanical properties of brazed joints of dispersion-strengthened copper alloy
von: S. V. Maksimova, et al.
Veröffentlicht: (2010)

Modeling of continuous casting by combined process of MCCB + ESR
von: L. B. Medovar, et al.
Veröffentlicht: (2017)

Alloying of surface layer of mould copper plates by the method of plasma-arc remelting
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2017)

Application of glow discharge plasma for cleaning (activation) and modification of metal surfaces while welding, brazing, and coating deposition
von: M. G. Bolotov, et al.
Veröffentlicht: (2021)

Effectiveness of combined gas-slag protection at mig deposition of copper alloys on steel
von: T. B. Maidanchuk, et al.
Veröffentlicht: (2022)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2014)

Brazing of ZrO2-ceramic to metal by silver—copper—oxygen filler on the air
von: A. V. Durov
Veröffentlicht: (2014)

Effect of quasi-crystalline coatings Al–Cu–Fe (B), produced by the method of electron beam deposition, on service properties of dies and press moulds
von: V. A. Telichko, et al.
Veröffentlicht: (2014)

Investigations of physico-mechanical properties of refined copper as a material for CCM mould walls
von: O. M. Smirnov, et al.
Veröffentlicht: (2024)

Complex boron coating alloys with copper
von: S. M. Cherneha, et al.
Veröffentlicht: (2013)

Deposition of ceramic coating on the surface of a porous matrix of infrared gas torch
von: O. V. Kolisnichenko, et al.
Veröffentlicht: (2022)

Nanodimensional discrete coatings of copper oxide on crystals of sodium chloride deposited from vapor phase in vacuum
von: I. S. Kovinskij, et al.
Veröffentlicht: (2012)

Strengthening the surface layer of CCM mould copper plates by hafnium with application of plasma-arc technology
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2015)

Obtaining of combined hardening coatings of copper molds of mashines for continuous-casting of billets
von: Paustovsky, A.V., et al.
Veröffentlicht: (2019)

Effect of cooling mode after diffusion welding and brazing on residual stresses in graphite—copper edge joints
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2015)

Structure and properties of coatings Ni-Cr-B-Si-Fe-WC-Co deposited on steel and copper substrates
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2008)

Diamond electroplated coating with protection by diamond micron powder in a dressing tool. Part 1. Coating deposition conditions
von: M. N. Shejko, et al.
Veröffentlicht: (2017)

Industrial technology of deposition of two-layer plasma heat-protective coatings on gas turbine blades
von: V. A. Akrymov, et al.
Veröffentlicht: (2020)

Producing of SiC-based protective coatings on zirconium fuel-element shells by the method of electron beam deposition
von: A. I. Ustinov, et al.
Veröffentlicht: (2016)

Analysis of Two-Dimensional Unsteady Temperature Fields in a Copper Panel During its Induction Heating
von: Мусій, Роман, et al.
Veröffentlicht: (2025)

ESR in uncooled mould
von: F. K. Biktagirov, et al.
Veröffentlicht: (2019)

Brazing of titanium alloys using brazing alloys based on aluminium
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Fluxless brazing of aluminium alloys by brazing filler metal of Al-Ge system
von: O. M. Sabadash, et al.
Veröffentlicht: (2023)

Use of analytic hierarchy process for choosing the optimum composition of antiburning coating for frozen moulds
von: T. V. Lysenko, et al.
Veröffentlicht: (2013)

Industrial electron beam installation L-8 for deposition of heat-protective coatings on turbine blades
von: N. I. Grechanjuk, et al.
Veröffentlicht: (2014)