Improvement of technology of welding of high-temperature diaphragms of steam turbine continuous-flow part
Збережено в:
Дата: | 2016 |
---|---|
Автори: | A. K. Tsarjuk, Ju. Skulskij, M. A. Nimko, A. N. Gubskij, A. V. Vavilov, A. G. Kantor |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
2016
|
Назва видання: | Automatic Welding |
Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000606237 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
-
Manufacture of the combined welded-forged medium-pressure rotor for 325 mW steam turbine
за авторством: A. K. Tsarjuk, та інші
Опубліковано: (2012) -
Investigation of the Thermal Strength of Steam Turbine Diaphragms with Reduction of Axial Dimensions
за авторством: B. P. Zaitsev, та інші
Опубліковано: (2021) -
Investigation of the Thermal Strength of Steam Turbine Diaphragms with Reduction of Axial Dimensions
за авторством: Зайцев, Б. Ф., та інші
Опубліковано: (2021) -
Investigation of the Thermal Strength of Steam Turbine Diaphragms with Reduction of Axial Dimensions
за авторством: Зайцев, Б. Ф., та інші
Опубліковано: (2021) -
Repair welding of turbine body parts of heat-resistant steels without postweld heat treatment
за авторством: A. K. Tsarjuk, та інші
Опубліковано: (2009)