Buchumschlag

Improvement of technology of welding of high-temperature diaphragms of steam turbine continuous-flow part

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	A. K. Tsarjuk, Ju. Skulskij, M. A. Nimko, A. N. Gubskij, A. V. Vavilov, A. G. Kantor
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2016
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000606237
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Manufacture of the combined welded-forged medium-pressure rotor for 325 mW steam turbine
von: A. K. Tsarjuk, et al.
Veröffentlicht: (2012)

Investigation of the Thermal Strength of Steam Turbine Diaphragms with Reduction of Axial Dimensions
von: B. P. Zaitsev, et al.
Veröffentlicht: (2021)

Investigation of the Thermal Strength of Steam Turbine Diaphragms with Reduction of Axial Dimensions
von: Зайцев, Б. Ф., et al.
Veröffentlicht: (2021)

Investigation of the Thermal Strength of Steam Turbine Diaphragms with Reduction of Axial Dimensions
von: Зайцев, Б. Ф., et al.
Veröffentlicht: (2021)

Improvement of impact toughness of metal of combined welded joints of alloyed bainite steels
von: S. I. Moravetskij, et al.
Veröffentlicht: (2017)

Repair welding of turbine body parts of heat-resistant steels without postweld heat treatment
von: A. K. Tsarjuk, et al.
Veröffentlicht: (2009)

Using the interpolation-analytical approximation of the Iapws-95 equations in the flow calculation of the steam turbine flow part
von: A. V. Rusanov, et al.
Veröffentlicht: (2015)

Selection of technology of repair welding of parts of turbine units
von: A. K. Tsarjuk, et al.
Veröffentlicht: (2017)

Using the interpolation-analytical approximation of the Iapws-95 equations in the flow calculation of the steam turbine flow part
von: Русанов, Андрей Викторович, et al.
Veröffentlicht: (2015)

Using the interpolation-analytical approximation of the Iapws-95 equations in the flow calculation of the steam turbine flow part
von: Русанов, Андрей Викторович, et al.
Veröffentlicht: (2015)

Concept of K-300 Series Steam Turbine Flow Part Modernization for Transition to Operation with Ultra-Supercritical Steam Parameters
von: Русанов, Р. А.
Veröffentlicht: (2026)

Concept of K-300 Series Steam Turbine Flow Part Modernization for Transition to Operation with Ultra-Supercritical Steam Parameters
von: Русанов, Р. А.
Veröffentlicht: (2026)

Selection of modes of high-temperature tempering of heat-resistant steel welded joints made by electrodes Thermanit MTS616
von: Ju. Skulskij, et al.
Veröffentlicht: (2016)

INFLUENCE OF THE OPERATING AND GEOMETRIC CHARACTERISTICS ON THE EFFICIENCY OF A POWERFUL STEAM TURBINE HPC FLOW PART
von: Rusanov, Roman, et al.
Veröffentlicht: (2025)

Electromagnetic radiation in the steam turbine
von: A. A. Tarelin, et al.
Veröffentlicht: (2017)

Computational techniques for metastable steam parameters determination in no equilibrium expanding flow in turbine channel
von: I. E. Annopolskaja, et al.
Veröffentlicht: (2011)

Method of calculation of unsteady formation of the liquid phase in rapidly expanding flows of supercooled steam in the stages of wet steam turbines
von: A. L. Shubenko, et al.
Veröffentlicht: (2015)

The Structure of the Flow Behind the Last Stage of Steam Turbine at the Low Flow Rate Operating Condition
von: O. L. Shubenko, et al.
Veröffentlicht: (2022)

Development of the Flow Part of Reactive Type HPC of K-325-23.5 Series Steam Turbine Based on the Use of Modern Computer Technologies
von: A. V. Rusanov, et al.
Veröffentlicht: (2021)

Restorative thermal treatment of shell parts of turbines during complex turbine reconstruction after continuous service
von: A. A. Ljubimov
Veröffentlicht: (2012)

Energy efficient of combined gas-turbine and steam-turbine units
von: D. A. Pereverzev, et al.
Veröffentlicht: (2010)

Delayer fracture resistance of welded joints of rotor steel 25Kh2NMFA after welding reheating
von: Ju. Skulskij, et al.
Veröffentlicht: (2019)

An exhaust hood of the powerful steam turbine designing with application a numerical simulation of three-dimensional flow
von: D. A. Adamson, et al.
Veröffentlicht: (2012)

Method of calculation of unsteady formation of the liquid phase in rapidly expanding flows of supercooled steam in the stages of wet steam turbines
von: Шубенко, Александр Леонидович, et al.
Veröffentlicht: (2015)

Method of calculation of unsteady formation of the liquid phase in rapidly expanding flows of supercooled steam in the stages of wet steam turbines
von: Шубенко, Александр Леонидович, et al.
Veröffentlicht: (2015)

Computational techniques for metastable steam parameters determination in no equilibrium expanding flow in turbine channel
von: Аннопольская, И. Е., et al.
Veröffentlicht: (2016)

Computational techniques for metastable steam parameters determination in no equilibrium expanding flow in turbine channel
von: Аннопольская, И. Е., et al.
Veröffentlicht: (2016)

Analysis of the Influence of Steam Electrification on the Working Processes of a Wet Steam Turbine
von: A. V. Nechaiev, et al.
Veröffentlicht: (2022)

Electromagnetic radiation in the steam turbine
von: Тарелин, А. А., et al.
Veröffentlicht: (2017)

Electromagnetic radiation in the steam turbine
von: Тарелин, А. А., et al.
Veröffentlicht: (2017)

Numerical study of flow irregularity in a new type control section of steam turbine high-pressure module
von: Yu. A. Bykov, et al.
Veröffentlicht: (2020)

Improving geometry and reliability multisupporting long tail compounds steam turbine blades
von: Бояршинов, А. Ю.
Veröffentlicht: (2014)

Improving geometry and reliability multisupporting long tail compounds steam turbine blades
von: Ju. Bojarshinov
Veröffentlicht: (2014)

Improving geometry and reliability multisupporting long tail compounds steam turbine blades
von: Бояршинов, А. Ю.
Veröffentlicht: (2014)

Integrated Studies of Electrophysical Processes in Steam Turbines
von: A. O. Tarelin, et al.
Veröffentlicht: (2023)

Improving the quality condition of the structure of welded joints made of rotor steel
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)

Assessment of susceptibility of welded joints of heat-resistant chromium martensite steel to crack formation during heat treatment
von: Ju. Skulskij, et al.
Veröffentlicht: (2009)

Development of the Flow Part of Reactive Type HPC of K-325-23.5 Series Steam Turbine Based on the Use of Modern Computer Technologies
von: Русанов, А. В., et al.
Veröffentlicht: (2022)

Development of the Flow Part of Reactive Type HPC of K-325-23.5 Series Steam Turbine Based on the Use of Modern Computer Technologies
von: Русанов, А. В., et al.
Veröffentlicht: (2022)

Numerical study of flow irregularity in a new type control section of steam turbine high-pressure module
von: Bykov, Yurii A., et al.
Veröffentlicht: (2025)