Cover Image

Evaluation of thermal resistance of three-layer honeycomb panel produced of alloy YuIPM-1200 by the method of vacuum diffusion welding

Saved in:

Bibliographic Details
Date:	2016
Main Authors:	I. A. Gusarova, M. Parko, A. M. Potapov, Ju. V. Falchenko, L. V. Petrushinets, T. V. Melnichenko, V. E. Fedorchuk
Format:	Article
Language:	English
Published:	2016
Series:	Automatic Welding
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000606706
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Possibilities of manufacturing three-layer welded honeycomb panels from aluminium alloys
by: L. V. Petrushinets, et al.
Published: (2018)

Application of a layered composite material based on aluminium and titanium alloys to produce welded three-layer honeycomb panels
by: L. V. Petrushynets, et al.
Published: (2022)

Non-destructive testing of elements of titanium honeycomb panels by shearography method using vacuum load
by: L. M. Lobanov, et al.
Published: (2021)

Vacuum diffusion welding of foil from powder nickel-chromium alloy
by: I. A. Gusarova, et al.
Published: (2017)

Modern methods of manufacturing three-layer panels from aluminium alloys (Review)
by: Ju. V. Falchenko, et al.
Published: (2018)

Vacuum diffusion welding of γ-TiAl intermetallic with high-temperature nickel alloy with application of intermediate Al/Ni nanolayers
by: Ju. V. Falchenko, et al.
Published: (2019)

Influence of temperature of heating in vacuum on behaviour of oxide film on the surface of γ-TiAl intermetallic alloy
by: Ju. V. Falchenko, et al.
Published: (2017)

Vacuum diffusion welding of stainless steel through porous nickel interlayers
by: A. I. Ustinov, et al.
Published: (2015)

Peculiarities of producing Al-Ti bimetal sheet joints by the method of vacuum diffusion welding
by: Yu. V. Falchenko, et al.
Published: (2020)

Investigation of heat treatment effect on the strength of Al–Ti bimetal honeycomb core
by: Yu. V. Falchenko, et al.
Published: (2021)

Vacuum diffusion bonding of alloy on γ-TiAl base using nanolayers interlayers
by: G. K. Kharchenko, et al.
Published: (2011)

Investigation of properties of coal-plastic honeycomb structures for lightweight aerospace applications
by: A. V. Degtjarev, et al.
Published: (2012)

Producing of permanent joints of alloys on y-TiAl base using multilayer nanostructured foil Ti/Al applying the method of diffusion welding in vacuum
by: A. I. Ustinov, et al.
Published: (2009)

Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
by: I. I. Derevianko, et al.
Published: (2021)

TI/ Al foils: methods of producing, properties and application in pressure welding
by: A. I. Ustinov, et al.
Published: (2012)

The beam transport system in the SRS-1200
by: Ivashchenko, V.E., et al.
Published: (2002)

Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
by: Деревянко, И. И., et al.
Published: (2022)

Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
by: Деревянко, И. И., et al.
Published: (2022)

Distribution of chemical elements in the zone of joining of aluminium alloy AMg6 with titanium alloy VT6 produced using diffusion welding in vacuum
by: Ju. V. Falchenko, et al.
Published: (2013)

Diffusion vacuum welding of intemetallic alloy γ-TiAl with steel 12Kh18N10T
by: G. K. Kharchenko, et al.
Published: (2012)

Mobile honeycomb communication and perspective of its development
by: V. N. Evstafev, et al.
Published: (2017)

О времени создания Киевского свода "1200г."
by: Толочко, А.
Published: (2006)

Producing dissimilar joints of molybdenum–stainless steel using vacuum brazing
by: S. V. Maksimova, et al.
Published: (2017)

Conditions of producing defect-free quasi-crystalline Al–Cu–Fe coatings using the method of electron beam deposition in vacuum
by: S. S. Polishchuk, et al.
Published: (2014)

Properties of steel-copper bimetal produced by brazing in autonomous vacuum
by: I. P. Serebrjanik, et al.
Published: (2018)

Flexible electroluminescent panels
by: Vlaskin, V.I., et al.
Published: (2007)

Optimization of the procedure of thermal flaw detection of honeycomb structures
by: V. A. Storozhenko, et al.
Published: (2013)

Nanoparticles of magnetite produced by the method of condensation of molecular beams in vacuum
by: Ju. A. Kurapov, et al.
Published: (2009)

Producing of thick vacuum condensates of high-entropic alloys CrFeCoNiCu and AlCrFeCoNiCu by the method of electron beam deposition
by: A. I. Ustinov, et al.
Published: (2019)

Manufacture of stainless steel – aluminium transition pieces using method of pressure welding in vacuum
by: G. K. Kharchenko, et al.
Published: (2012)

Influence of the annealing of silicon crystals at 1200 °C on the Hall effect and magnetoresistance
by: Baranskyy, P.I., et al.
Published: (2002)

Study of the content of benz|a|pyrene in the oils and fats using analyzer Agilent 1200
by: V. A. Kishchenko, et al.
Published: (2014)

Absorption–desorption of carbon dioxide in carbon honeycombs at elevated temperatures
by: N. V. Krainyukova, et al.
Published: (2019)

Absorption–desorption of carbon dioxide in carbon honeycombs at elevated temperatures
by: Krainyukova, N.V., et al.
Published: (2019)

Electronic spectrum and superconductivity in the t-J model on the honeycomb lattice
by: Plakida, N.M.
Published: (2018)

Determining optimal angles of photovoltaic panels
by: Ju. Gaevskij, et al.
Published: (2016)

Mechanical properties and structural features of butt joints produced at FSW of aluminium alloys of different alloying systems
by: A. H. Pokliatskyi, et al.
Published: (2023)

Magnetic materials on base of microlayer condensates Fe/Cu produced by electron beam deposition in vacuum
by: S. E. Litvin, et al.
Published: (2009)

Micro-nanolayer coverings produced by the method vacuum-arc deposition from use the HF-discharge
by: V. M. Beresnev, et al.
Published: (2006)

Defining average temperature of photovoltaic panels
by: D. P. Kolomiiets, et al.
Published: (2015)