Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding

Збережено в:

Бібліографічні деталі
Дата:	2016
Автор:	V. I. Lavrinenko
Формат:	Стаття
Мова:	English
Опубліковано:	2016
Назва видання:	Superhard Materials
Онлайн доступ:	http://jnas.nbuv.gov.ua/article/UJRN-0000692649
Теги:	Додати тег Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Репозитарії

Library portal of National Academy of Sciences of Ukraine | LibNAS

Схожі ресурси

Oxidation or oxide materials in the machining zone in superabrasive grinding—a factor of influence on the grinding performance
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2016)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 1. Superabrasive composites
за авторством: V. I. Lavrinenko
Опубліковано: (2019)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
за авторством: V. I. Lavrinenko
Опубліковано: (2019)

Gear grinding with superabrasive dish wheels
за авторством: S. V. Rjabchenko
Опубліковано: (2014)

Gear grinding with superabrasive dish wheels
за авторством: S. V. Rjabchenko
Опубліковано: (2014)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 2. Water freezing in porous space of superabrasive composites
за авторством: V. I. Lavrinenko
Опубліковано: (2019)

Thermoelectric phenomena in machining processes and a study of their functioning in superabrasive grinding
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2015)

The process of abrasive processing as frictional interaction: a factor of the sludge availability on the cutting surface of diamond wheels
за авторством: V. I. Lavrinenko
Опубліковано: (2020)

On the influence of the hydrogen index of technology liquids for performance characteristics diamond abrasive wheels
за авторством: V. I. Lavrinenko
Опубліковано: (2024)

Abrasive ability of staurolite mineral concentrate*. use of stavrolit in abrasive pastes and in grinding tools
за авторством: V. G. Poltoratskij, та інші
Опубліковано: (2019)

Grinding of gear wheels by diamond-abrasive wheels
за авторством: S. V. Rjabchenko
Опубліковано: (2017)

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2022)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
за авторством: A. A. Adamovskij, та інші
Опубліковано: (2015)

Contact Deformation Behavior of an Elastic Silicone/SiC Abrasive in Grinding and Polishing
за авторством: Li, N., та інші
Опубліковано: (2018)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2024)

Preparation and properties grinding powders and micro powders made of impact diamond- lonsdaleite abrasives
за авторством: V. P. Afanasev, та інші
Опубліковано: (2016)

Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
за авторством: Jaworski, J., та інші
Опубліковано: (2016)

Current advances in the development of abrasive tools and investigation of diamond abrasive machining processes (materials science approach). Review
за авторством: V. I. Lavrinenko
Опубліковано: (2018)

Fulfillment of rough surface profile obtained by diamond-abrasive treatment, as one of the factors of its bearing capacity
за авторством: V. I. Lavrinenko
Опубліковано: (2023)

Improving accuracy of profile hydro-abrasive cutting of plates of hardmetals and superhard materials
за авторством: A. F. Salenko, та інші
Опубліковано: (2014)

Investigation efficiency abrasive composites formed active technology environment in the area of cutting
за авторством: E. A. Pashchenko, та інші
Опубліковано: (2016)

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2021)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
за авторством: V. G. Poltoratskij, та інші
Опубліковано: (2016)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2024)

The process of abrasive machining as a friction interaction between dissimilar materials
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2018)

SDiamond machining ceramics: influence of abrasive particle aspect of sludge
за авторством: V. I. Lavrinenko
Опубліковано: (2019)

Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process
за авторством: P. G. Matjukha, та інші
Опубліковано: (2017)

Determining cutting force components in deep grinding of revolution surfaces by oriented el'bor wheel
за авторством: V. I. Kalchenko, та інші
Опубліковано: (2012)

The influence of machining conditions on performance of diamond grinding of silicon carbide ceramic balls
за авторством: S. V. Sokhan, та інші
Опубліковано: (2018)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
за авторством: V. K. Starkov, та інші
Опубліковано: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
за авторством: V. K. Starkov, та інші
Опубліковано: (2014)

Co-crystallization of filamentous and globular carbon on diamond and cBN during production of composite abrasive thermostable powders intended for grinding tools
за авторством: V. G. Poltoratskij
Опубліковано: (2019)

Specifying the process parameters for diamond dressing of grinding wheels
за авторством: Ya. O. Shakhbazov, та інші
Опубліковано: (2019)

To the analysis of the estimation of energy costs during diamond-abrasive processing by wheels from superhard materials
за авторством: V. I. Lavrinenko
Опубліковано: (2022)

An evaluating and detecting system of diamond saw blades cutting performance
за авторством: Hu Yule, та інші
Опубліковано: (2010)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2013)

On calculation of cutting forces and characteristics of the contact interaction of a chip with the tool in cutting plastic metals
за авторством: A. A. Vinogradov
Опубліковано: (2013)

Influence of the parameters of magnetic abrasive treatment on the surface roughness of carbide tools
за авторством: A. B. Bobin, та інші
Опубліковано: (2019)

Diamond grinding of the WC–8Co–steel 45 composition using the control of the wheel cutting ability by an electroerosion method
за авторством: A. V. Burdin, та інші
Опубліковано: (2013)

Physicomechanical parameters under cutting of deposited surfaces
за авторством: V. V. Kolomiiets, та інші
Опубліковано: (2021)