Cover Image

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels

Saved in:

Bibliographic Details
Date:	2016
Main Authors:	N. E. Stakhniv, L. N. Devin
Format:	Article
Language:	English
Published:	2016
Series:	Tooling materials science
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000713080
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
by: L. N. Devin, et al.
Published: (2012)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
by: N. E. Stakhniv
Published: (2013)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
by: N. E. Stakhniv, et al.
Published: (2012)

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
by: N. E. Stakhniv
Published: (2017)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
by: S. A. Klimenko, et al.
Published: (2012)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
by: V. M. Bushlja, et al.
Published: (2014)

An increase of operating characteristics of cBN cutters by improving their damping properties
by: L. N. Devin, et al.
Published: (2012)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
by: Ye. Stakhniv, et al.
Published: (2022)

Effect of damping properties of cutters on the probability of failure of the CBN plates
by: L. M. Devin, et al.
Published: (2016)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
by: S. A. Klimenko, et al.
Published: (2015)

Investigation of cutting temperature in turning cutters with diamond-carbide plates
by: L. N. Devin, et al.
Published: (2018)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
by: Osipov, A.S., et al.
Published: (2016)

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
by: N. E. Stakhniv, et al.
Published: (2019)

Cutting section parametrs for oblique fine turning with a radius tool
by: L. M. Devin, et al.
Published: (2019)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
by: T. Zhao, et al.
Published: (2017)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
by: K. O. Diadiura, et al.
Published: (2015)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
by: A. S. Osipov, et al.
Published: (2016)

An experimental study of the influence of tool material and fine turning conditions on the level of acoustic emission signals
by: L. N. Devin, et al.
Published: (2016)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
by: L. N. Devin, et al.
Published: (2019)

The correlation model of acoustic emission in fine diamond turning
by: L. N. Devin, et al.
Published: (2017)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: P. Han, et al.
Published: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: L. Chen, et al.
Published: (2017)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: Chen, L., et al.
Published: (2017)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: Han, P., et al.
Published: (2018)

The Fine Structure of the Surface Layer and Tribological Properties of QT 41Cr4 Steel Parts after Finish Turning Machining with Coated Cutters
by: M. Enek, et al.
Published: (2014)

The influence of VC–Al additive on wear resistance of cBN-based composites
by: K. V. Slipchenko, et al.
Published: (2018)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
by: Ya. M. Romanenko, et al.
Published: (2017)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
by: L. M. Devin, et al.
Published: (2020)

Sintering of cBN based materials with TaC binder for cutting tool application
by: K. V. Slipchenko, et al.
Published: (2020)

Wear intensity of the PcBN tools with nanolayered protective coating
by: A. S. Manokhin, et al.
Published: (2020)

Pecularities of kinetics of delayed fracture of welded joints of hardening steels
by: Ju. Skulskij
Published: (2009)

Фізико–механічні властивості надтвердих композитів систем cBN-Ті, cBN-Al, cBN-перехідний метал-Al, отриманих реакційним спіканням за високого тиску
by: Романенко, Я.М., et al.
Published: (2015)

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
by: V. Kryzhanivskyy, et al.
Published: (2017)

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
by: Kryzhanivskyy, V., et al.
Published: (2017)

Study of performance of cbn incisors &quot;borsinit&quot; when turning titanium alloy VT1-0
by: L. N. Devin, et al.
Published: (2016)

Термобаричне спікання композиту cBN–Cr₃C₂
by: Сліпченко, К.В., et al.
Published: (2017)

Influence of the tool shape and location of cutters in it on the force distribution between the cutters at drilling gas-drainage boreholes
by: V. G. Krasnik
Published: (2013)

Твердые растворы в системах cBN-Al и cBN-Al-TiB₂, полученные при высоких давлениях и температурах
by: Беженар, Н.П., et al.
Published: (2011)