Determination of the permittivity ceramic matrix composites for high-precision machining new materials
Gespeichert in:
| Datum: | 2016 |
|---|---|
| Hauptverfasser: | V. I. Chasnyk, O. M. Kaidash, I. P. Fesenko, V. I. Kushch, L. O. Frolova |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2016
|
| Schriftenreihe: | Tooling materials science |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000713083 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
DETERMINATION OF THE EFFECTIVE PERMITTIVITY OF A HETEROGENEOUS MATERIAL
von: Palchykov, O. O.
Veröffentlicht: (2020)
von: Palchykov, O. O.
Veröffentlicht: (2020)
Theoretical and experimental estimations of the dielectric permittivity of AlN–Mo pressureless sintered compositesat the frequencies of 3.2–10.0 GHz
von: V. I. Chasnyk, et al.
Veröffentlicht: (2017)
von: V. I. Chasnyk, et al.
Veröffentlicht: (2017)
Determination of the maximum mechanical stresses in the insulating material around a defect with a high dielectric permittivity in an electrostatic field
von: Palchykov, O. О.
Veröffentlicht: (2024)
von: Palchykov, O. О.
Veröffentlicht: (2024)
Effective Dielectric Permittivity of Matrix Disperse Systems in Differential Medium Approximation
von: Pustovit, V. N., et al.
Veröffentlicht: (2013)
von: Pustovit, V. N., et al.
Veröffentlicht: (2013)
Dielectric characteristics of the high heat-conducting AlN-ceramics in the frequency range of 3—93 GHz
von: V. I. Chasnyk, et al.
Veröffentlicht: (2013)
von: V. I. Chasnyk, et al.
Veröffentlicht: (2013)
Iterative Two-Channel Servodrive of Feed for High Precision Machine Tools and Mechanisms
von: V. B. Klepikov, et al.
Veröffentlicht: (2015)
von: V. B. Klepikov, et al.
Veröffentlicht: (2015)
Electrodynamics of high-precision iterative feed electric drive of machining center with inertial load
von: O. A. Khudiayev, et al.
Veröffentlicht: (2023)
von: O. A. Khudiayev, et al.
Veröffentlicht: (2023)
Increase castings precision by using complex modified ceramics for rods
von: I. I. Maksjuta, et al.
Veröffentlicht: (2014)
von: I. I. Maksjuta, et al.
Veröffentlicht: (2014)
Microstructural characteristics and thermal conductivity of large-size parts from pressureless sintered ceramic AlN-base composite
von: D. V. Chasnyk, et al.
Veröffentlicht: (2023)
von: D. V. Chasnyk, et al.
Veröffentlicht: (2023)
Dielectric permittivity of (Ag₃AsS₃)x(As₂S₃)₁₋x superionic glasses and composites
von: Studenyak, I.P., et al.
Veröffentlicht: (2014)
von: Studenyak, I.P., et al.
Veröffentlicht: (2014)
High absorption of microwave radiation in pressureless sintered AlN–SiC composite in the frequency range 9.5–34.2 GHz
von: V. I. Chasnyk, et al.
Veröffentlicht: (2022)
von: V. I. Chasnyk, et al.
Veröffentlicht: (2022)
Use of high-thermal conductive aluminum nitride based ceramics in vacuum UHF electronic devices
von: V. I. Chasnyk
Veröffentlicht: (2013)
von: V. I. Chasnyk
Veröffentlicht: (2013)
Electric-physical characteristics of pressureless sintered AlN–TiN ceramic composite
von: I. P. Fesenko, et al.
Veröffentlicht: (2022)
von: I. P. Fesenko, et al.
Veröffentlicht: (2022)
Using composite diamond-containing materials structured with carbon binder and ceramic materials based on AlN in microwave radiation absorbers
von: O. V. Leshchenko, et al.
Veröffentlicht: (2019)
von: O. V. Leshchenko, et al.
Veröffentlicht: (2019)
Protective impact resistant composite materials based on aluminium-silicate glass-ceramics
von: Savvova, O.V., et al.
Veröffentlicht: (2019)
von: Savvova, O.V., et al.
Veröffentlicht: (2019)
S-Word Arithmetic and High Precision Calculations
von: Задірака, Валерій, et al.
Veröffentlicht: (2024)
von: Задірака, Валерій, et al.
Veröffentlicht: (2024)
Dynamic model of an iterative electric feed drive with two screw gears for precision machine tools and machining centers
von: O. A. Khudiayev, et al.
Veröffentlicht: (2024)
von: O. A. Khudiayev, et al.
Veröffentlicht: (2024)
High-precision in-flight calibration using unknown landmarks
von: A. I. Tkachenko
Veröffentlicht: (2021)
von: A. I. Tkachenko
Veröffentlicht: (2021)
Research of thermal conductivity, electrical resistivity and microwave absorption of microwave frequency radiation of AlN–Y2O3–Mo and AlN–Y2O3–TiN pressureless sintered composites
von: V. I. Chasnyk, et al.
Veröffentlicht: (2020)
von: V. I. Chasnyk, et al.
Veröffentlicht: (2020)
Structure and current-voltage characteristics of islet gold films on high-heat conducting pressureless sintered AlN ceramics
von: I. P. Fesenko, et al.
Veröffentlicht: (2018)
von: I. P. Fesenko, et al.
Veröffentlicht: (2018)
Innovative directions of development of ceramic materials for dentistry
von: O. V. Savvova, et al.
Veröffentlicht: (2021)
von: O. V. Savvova, et al.
Veröffentlicht: (2021)
Basic measuring module for implementation of the high-precision devices for determining the impedance parameters in a wide frequency range
von: V. H. Melnyk, et al.
Veröffentlicht: (2020)
von: V. H. Melnyk, et al.
Veröffentlicht: (2020)
Estimation of the dielectric permeability in non-conductive composites with the content and morphology of the conducting particles in the microwave frequencies
von: D. V. Chasnyk, et al.
Veröffentlicht: (2021)
von: D. V. Chasnyk, et al.
Veröffentlicht: (2021)
Influence of molybden powder dispersion on formation of AlN–composite dielectric properties
von: V. I. Chasnyk, et al.
Veröffentlicht: (2019)
von: V. I. Chasnyk, et al.
Veröffentlicht: (2019)
Selection justification of methods for obtaining glass-ceramic materials
von: O. V. Savvova, et al.
Veröffentlicht: (2019)
von: O. V. Savvova, et al.
Veröffentlicht: (2019)
Influence of sintering temperature on volume electric resistance and absorption of electromagnetic energy of pressureless sintered AlN–SiC composites
von: V. I. Chasnyk, et al.
Veröffentlicht: (2022)
von: V. I. Chasnyk, et al.
Veröffentlicht: (2022)
Existence criterion of negative dielectric permittivity in crystals
von: S. G. Felinskij, et al.
Veröffentlicht: (2014)
von: S. G. Felinskij, et al.
Veröffentlicht: (2014)
Tools for precision diamond machining of spherical heads of endoprostheses from pure titanium
von: E. A. Pashchenko, et al.
Veröffentlicht: (2013)
von: E. A. Pashchenko, et al.
Veröffentlicht: (2013)
Dielectric permittivity of (Ag3AsS3)x(As2S3)1-x superionic glasses and composites
von: I. P. Studenyak, et al.
Veröffentlicht: (2014)
von: I. P. Studenyak, et al.
Veröffentlicht: (2014)
Methodological approaches to development of bioactive resorption glass-ceramic materials for bone endoprosthetics
von: O. V. Savvova, et al.
Veröffentlicht: (2018)
von: O. V. Savvova, et al.
Veröffentlicht: (2018)
High absorption of the microwave energy in a system with strongly elongated molybdenum grains in aluminum nitride matrix at frequencies of 9.5–10.5 GHz
von: V. I. Chasnyk
Veröffentlicht: (2012)
von: V. I. Chasnyk
Veröffentlicht: (2012)
SDiamond machining ceramics: influence of abrasive particle aspect of sludge
von: V. I. Lavrinenko
Veröffentlicht: (2019)
von: V. I. Lavrinenko
Veröffentlicht: (2019)
Frequency and Temperature Dependencies of Water Permittivity in Submillimeter Wave Range
von: Malyshenko, Yu. I., et al.
Veröffentlicht: (2013)
von: Malyshenko, Yu. I., et al.
Veröffentlicht: (2013)
THE METHOD OF DETERMINING THE DIELECTRIC RELATIVE PERMITTIVITY IN THE MM AND SUBMM WAVELENGTH RANGES BASED ON THE MEASURING OF THE PLASMON-POLARITONE RESONANCE PARAMETERS
von: Lytvynenko, L. N., et al.
Veröffentlicht: (2020)
von: Lytvynenko, L. N., et al.
Veröffentlicht: (2020)
The Method of Determining the Dielectric Relative Permittivity in the mm and submm Wavelength Ranges Based on the Measuring of the Plasmon-Polaritone Resonance Parameters
von: L. M. Lytvynenko, et al.
Veröffentlicht: (2020)
von: L. M. Lytvynenko, et al.
Veröffentlicht: (2020)
The creation of ceramic matrix composites of the BL group based on cBN and hightemperature hafnium or molybdenum carbides
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)
Negative dielectric permittivity of nonmagnetic crystals in the terahertz waveband
von: S. G. Felinskyi, et al.
Veröffentlicht: (2012)
von: S. G. Felinskyi, et al.
Veröffentlicht: (2012)
Evaluation of permittivity and surface tension of organic and synthetic lubricants
von: N. V. Khmel, et al.
Veröffentlicht: (2017)
von: N. V. Khmel, et al.
Veröffentlicht: (2017)
Negative dielectric permittivity of nonmagnetic crystals in the terahertz waveband
von: Felinskyi, S.G., et al.
Veröffentlicht: (2012)
von: Felinskyi, S.G., et al.
Veröffentlicht: (2012)
Multicomponent coatings for precise tribological pairs working in friction assembly of machine building and aviation
von: A. V. Sagalovich, et al.
Veröffentlicht: (2007)
von: A. V. Sagalovich, et al.
Veröffentlicht: (2007)
Ähnliche Einträge
-
DETERMINATION OF THE EFFECTIVE PERMITTIVITY OF A HETEROGENEOUS MATERIAL
von: Palchykov, O. O.
Veröffentlicht: (2020) -
Theoretical and experimental estimations of the dielectric permittivity of AlN–Mo pressureless sintered compositesat the frequencies of 3.2–10.0 GHz
von: V. I. Chasnyk, et al.
Veröffentlicht: (2017) -
Determination of the maximum mechanical stresses in the insulating material around a defect with a high dielectric permittivity in an electrostatic field
von: Palchykov, O. О.
Veröffentlicht: (2024) -
Effective Dielectric Permittivity of Matrix Disperse Systems in Differential Medium Approximation
von: Pustovit, V. N., et al.
Veröffentlicht: (2013) -
Dielectric characteristics of the high heat-conducting AlN-ceramics in the frequency range of 3—93 GHz
von: V. I. Chasnyk, et al.
Veröffentlicht: (2013)