Cover Image

Experimental Study of Thermochemical Conversion Process for Plant Biomass into Combustible Gas and Biocarbon on Installation of Screw Type

Saved in:

Bibliographic Details
Date:	2016
Main Authors:	E. V. Skljarenko, B. D. Bileka
Format:	Article
Language:	English
Published:	2016
Series:	Energy Technologies and Resource Saving
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000727643
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Biocarbon as an effective solid fuel from biomass
by: Ye. V. Skliarenko, et al.
Published: (2019)

DESIGN FEATURES OF THE EXPERIMENTAL UNIT AND NUMERICAL STUDIES OF BIOMASS THERMOCHEMICAL PROCESSING PART 5 PYROLYSIS OF FINE BIOMASS PARTICLES IN AN UPWARD FLOW
by: Rokhman , B., et al.
Published: (2025)

Research of biomass fast pyrolysis in the ablative screw reactor
by: V. M. Klymenko, et al.
Published: (2016)

Influence of operating parameters and non-equilibrium conversion on the characteristics of thermochemical recuperation of the heat of gases of high-temperature installations
by: V. P. Yatsenko, et al.
Published: (2016)

Technical analysis of products of used tires thermochemical conversion
by: Ye. V. Skliarenko, et al.
Published: (2019)

Modeling and Numerical Study of the Thermochemical Processing of Biomass and Coal in the Furnace Devices. 1. The Fixed Bed
by: B. B. Rokhman, et al.
Published: (2012)

NUMERICAL STUDIES OF A TWO-STAGE THERMOCHEMICAL BIOMASS PROCESSING IN A FIXED BED PLANT WITH A CAPACITY OF 1250 kg/h
by: Rokhman, B., et al.
Published: (2023)

Theoretical combustion temperature of biomass and products of its thermolysis
by: M. M. Zhovmir
Published: (2013)

Concentration conditions of forced ignition of volatiles at biomass combustion
by: M. M. Zhovmir
Published: (2013)

Expediency of using the method of thermochemical regeneration at the reconstruction of a gas thermal power plant
by: I. V. Antonets
Published: (2020)

Analysis of conditions for burning of volatiles and air mixtures at biomass combustion
by: M. M. Zhovmir
Published: (2014)

Hydrothermal Conversion of Biomass into Crude for Production of Motor Fuels
by: V. A. Bortyshevskyi, et al.
Published: (2012)

Determination of the expedient volume of using the technology of thermochemical recuperation for gas turbine plants of Ukrainian gas-pumping stations
by: O. A. Shraiber, et al.
Published: (2018)

Using the enthalpy of cooling of the high-temperature elements of thermal plants by the method of thermochemical recuperation (thermochemical protection)
by: O. A. Shraiber
Published: (2016)

The Role of Electrical Activation of Molecules Reagents Combustion Reaction in the Energy Efficiency of Fuel Combustion Installations with a Propane-Butane Mixtureand and Natural Gas
by: B. M. Kovalyshyn
Published: (2017)

Mathematical model of melt flow in the head screw type
by: Ya. H. Dvoinos, et al.
Published: (2016)

PECULIARITIES OF APPLICATION OF THE NORMATIVE DOCUMENTS ON LIMITATION OF POLLUTANT EMISSIONS AT BIOMASS COMBUSTION
by: Zhovmir, M., et al.
Published: (2019)

Biomass Co-Combustion Process Assessment Using Series of Flame Images
by: A. Kotyra, et al.
Published: (2013)

Peculiarities of application of the normative documents on limitation of pollutant emissions at biomass combustion
by: M. M. Zhovmir, et al.
Published: (2019)

The Simulation and Numerical Study of Biomass and Coal Thermochemical Processing in Furnace Devices. 2. Pneumatic Transport Zone Energy Saving Technologies
by: B. B. Rokhman, et al.
Published: (2012)

The fuel economicity of coheneration-heat pump technologies on the basis of gas turbine installations in medium capacity boiler-houses
by: B. D. Bileka, et al.
Published: (2018)

The System of Automatic Combustion Control in Gas-Burning Plants by Corrective Parameter
by: K. S. Kryzhanovskij
Published: (2018)

Determination of biomass co-combustion process state based on flame image series analysis
by: Kotyra, A., et al.
Published: (2017)

Determination of biomass co-combustion process state based on flame image series analysis
by: A. Kotyra, et al.
Published: (2017)

Determination of the optimal conditions of implementing the process of thermochemical recuperation for using the heat of exhaust gases of a gas-turbine plant
by: O. A. Shraiber
Published: (2015)

The Features of Tubular Type Burner System for Combustion Chamber Gas Transporting Unit
by: G. B. Varlamov, et al.
Published: (2012)

Artificial intelligence methods in diagnostics of coal-biomass blends co-combustion in pulverised coal burners
by: A. Smolarz, et al.
Published: (2017)

Gas Burners for Combustion of Biogas in Boilers
by: Ja. Sigal, et al.
Published: (2014)

Experimental study of a single particle kinetics of combustion of pulverized coal
by: E. A. Khadzhinov
Published: (2013)

Screw-Type Symmetry in Machine Components and Design at Implementation on a 3D Printer
by: Sheyko, T. I., et al.
Published: (2019)

Screw-Type Symmetry in Machine Components and Design at Implementation on a 3D Printer
by: Sheyko, T. I., et al.
Published: (2019)

Screw-Type Symmetry in Machine Components and Design at Implementation on a 3D Printer
by: T. I. Sheyko, et al.
Published: (2019)

Experimental study of processes for biomass energy technology converting in fixed bed reactors
by: S. V. Klius
Published: (2015)

The Experimental Installation for Processes of Gas Flow Cleaning from Liquid Highly Dispersed Particles Investigation
by: S. S. Ryzhkov, et al.
Published: (2010)

Plant pigments as indicators of phytoplankton biomass review
by: N. M. Mineeva
Published: (2011)

Experimental and numerical studies of the work process in pneumatic abrasive installations
by: Baha Vadym, et al.
Published: (2025)

Studying the design parameters impact of a batch reactor over temperature mode for biomass-to-diesel energy conversion process
by: M. O. Budko
Published: (2016)

Thermochemical and catalytic properties of modified bentonites
by: T. L. Rakitskaya, et al.
Published: (2015)

Peierls barriers of a-type edge and screw dislocations moving on basal and prismatic planes in magnesium
by: A. Ostapovets, et al.
Published: (2017)

Methods and hardware oriented algorithms for making stellarator magnetic system screw-type winding images
by: Vorobyova, V.P., et al.
Published: (2005)