Cover Image

Retarding of intergranular fracture of centryfugal casting steel 40Cr25Ni20Si2 by secondary boundaries

Saved in:

Bibliographic Details
Date:	2016
Main Authors:	S. I. Gubenko, Ju. I. Baleva
Format:	Article
Language:	English
Published:	2016
Series:	Metal and casting of Ukraine
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000989118
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Influence of carbides morphology on fracture toughness of cast steel G200CrMoNi4-3-3
by: Stradomski, Z., et al.
Published: (2008)

Nano-microcomposite and combined coatings on Ti-Si-N/WC-Co-Cr/steel and Ti-Si-N/(Cr3C2)75-(NiCr)25 base: their structure and properties
by: N. K. Erdybaeva
Published: (2010)

Resistive and magnetoresistive properties of compacted CrO2 powders with different types of intergranular dielectric layers
by: N. V. Dalakova, et al.
Published: (2012)

Non-metal inclusions in centrifugal casted stell
by: S. I. Gubenko, et al.
Published: (2016)

Influence of arc surfacing modes on intergranular penetration of high tin bronze into steel
by: T. B. Majdanchuk, et al.
Published: (2018)

The Cr-Ni-Si steel forming in result of gas-electrical arc fusion
by: Ju. I. Lopukhov
Published: (2009)

Electrical properties intergranular boundaries in the volume of polycrystalline silicon
by: L. O. Olimov, et al.
Published: (2013)

Protection of casted steel from secondary oxidation and heat losses
by: A. P. Bochek, et al.
Published: (2012)

Microstructural and fracture analysis of aged cast duplex steel
by: Dyja, D., et al.
Published: (2008)

Nano-microcomposite and combined coatings on Ti-Si-N/WC-Co-Cr/steel and Ti-Si-N/(Cr₃C₂ )₇₅-(NiCr)₂₅ base: their structure and properties
by: Erdybaeva, N.K.
Published: (2010)

Irradiation-assisted intergranular stress corrosion cracking of austenitic stainless steel in steam-water mixture
by: Goncharenko, Yu.D., et al.
Published: (2002)

Hardening of steel 40Cr by combined treatment using laser.
by: A. F.I. Idan, et al.
Published: (2016)

Microstructure of intergranular boundaries in polycrystalline silicon and its effect on the transport of charge carriers
by: B. M. Abdurakhmanov, et al.
Published: (2010)

Structure and properties of coatings Ni-Cr-B-Si-Fe-WC-Co deposited on steel and copper substrates
by: A. D. Pogrebnjak, et al.
Published: (2008)

Development and smelting of casting high-entropy alloys based on the Fe-Co-Ni-Mn-Cr system
by: O. A. Shcheretskyi, et al.
Published: (2022)

Ultrasonic study of as-cast heterogeneous high-entropy alloy AlCuCrCoNiFe
by: Nadutov, V.M., et al.
Published: (2016)

Ultrasonic study of as-cast heterogeneous high-entropy alloy AlCuCrCoNiFe
by: V. M. Nadutov, et al.
Published: (2016)

Mössbauer and Ultrasonic Study of the As-Cast High-Entropy AlxCuCrCoNiFe Alloys
by: Nadutov, V.M., et al.
Published: (2017)

Combined laser-microplasma surfacing using powders of the Ni–Cr–B–Si system
by: Ju. S. Borisov, et al.
Published: (2012)

Комбинированная лазерно-микроплазменная наплавка порошками сплавов системы Ni–Cr–B–Si
by: Борисов, Ю.С., et al.
Published: (2012)

Распределение элементов в сплавах системы Cu-(Ni-Si)-(Fe-Cr-С)
by: Трубаченко, Л.Н., et al.
Published: (2012)

Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
by: M. I. Pashechko
Published: (2010)

Дослідження контактної взаємодії TiB2—SiC зі сплавами Ni—Cr
by: Уманський, О.П., et al.
Published: (2008)

The physiological basics of retardants application to oilseeds
by: V. H. Kuriata, et al.
Published: (2016)

Stability for retarded functional differential equations
by: Federson, M., et al.
Published: (2008)

Stability for retarded functional differential equations
by: Federson, M., et al.
Published: (2008)

Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
by: Zhao, L.H., et al.
Published: (2018)

Specifics of intergranular mass transfer of gallium in aluminium alloy in sold-state activation of surfaces being joined
by: Ju. A. Khokhlova, et al.
Published: (2011)

Microstructure and abrasive wear resistance of the deposited Ni–Cr–B–Si material with dispersive phases inclusions
by: S. O. Luzan, et al.
Published: (2020)

Зносотривкість евтектичних покривів системи Fe–Mn–C–B, легованих Si, Ni і Cr
by: Пашечко, М.І.
Published: (2010)

Delayer fracture resistance of welded joints of rotor steel 25Kh2NMFA after welding reheating
by: Ju. Skulskij, et al.
Published: (2019)

Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
by: Hlushkova, D.B., et al.
Published: (2023)

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
by: N. I. Tarasevich, et al.
Published: (2014)

Effect of microstructure parameters of Cr-Mn-(Ni)-N steels on susceptibility to carburization
by: I. F. Kirchu, et al.
Published: (2009)

On the practical application of the 18Cr10NiTi steel after barocryodeformation
by: P. A. Khajmovich
Published: (2016)

Peculiarities of fracture of high-chromium cast irons under abrasive wear
by: V. V. Netrebko, et al.
Published: (2021)

Influence of nitriding on the fatigue behavior and fracture micromechanisms of nodular cast Iron
by: Konecna, R., et al.
Published: (2008)

Application of the technological phase diagrams for optimization of melting and casting regimes of secondary aluminum alloys
by: O. A. Shcheretskyi
Published: (2009)

Influence of heat transfer intensity in secondary cooling zone on continuous cast ingot forming
by: I. V. Korniets, et al.
Published: (2014)

Effect of Al Content on Magnetic Properties and Thermal Expansion of As-Cast High-Entropy Alloys AlxFeCoNiCuCr
by: V. M. Nadutov, et al.
Published: (2015)