Buchumschlag

Optimization of the hole shapes in a quasi-orthotropic plate under biaxial tension

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
Hauptverfasser:	M. P. Savruk, V. S. Kravets, A. B. Chornenkyi
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2021
Schriftenreihe:	Materials Science (Physicochemical mechanics of materials)
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001255482
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The influence of shear loading on the shapes of optimal holes in a quasi-orthotropic plate
von: M. P. Savruk, et al.
Veröffentlicht: (2021)

Periodic system of closely located holes in a quasi-orthotropic plane
von: M. P. Savruk, et al.
Veröffentlicht: (2018)

Stress concentration at an elliptic hole or a parabolic notch in a quasi-orthotropic plane
von: A. Kazberuk, et al.
Veröffentlicht: (2016)

Mode I crack initiation in orthotropic viscoelastic plate under biaxial loading
von: O. S. Bogdanova
Veröffentlicht: (2013)

Plane problem of the theory of elasticity for a quasi-orthotropic body with cracks
von: M. P. Savruk, et al.
Veröffentlicht: (2015)

Stress state in a quasi-orthotropic half-plane with a curvilinear edge
von: M. P. Savruk, et al.
Veröffentlicht: (2019)

Integral equation of the plane problem of the elasticity theory for a multiply-connected quasi-orthotropic body
von: M. P. Savruk, et al.
Veröffentlicht: (2016)

Transversal oscillations of an orthotropic plate with a set of holes of arbitrary shape with account of distributed loading on the surface
von: T. V. Shopa, et al.
Veröffentlicht: (2021)

Plane eigenvalue problems of the elasticity theory for orthotropic and quasi-orthotropic wedges
von: M. P. Savruk, et al.
Veröffentlicht: (2014)

Biaxial tension of a piece-wise homogeneous plate with two cracks at the materials interface with account of plastic zones at their tips
von: M. M. Nykolyshyn, et al.
Veröffentlicht: (2014)

Deformation of an isotropic plate with a periodic system of curvilinear holes and plasticity bands
von: V. S. Kravets, et al.
Veröffentlicht: (2020)

Stress distribution at V-shaped notches in orthotropic plane under symmetrical loading
von: A. Kazberuk, et al.
Veröffentlicht: (2016)

The influence of the shape and location of orthotropic inclusion on the stress state of an anisotropic body under longitudinal shear
von: V. S. Kravets, et al.
Veröffentlicht: (2024)

Strength of elasto-plastic plates with a square hole (inclusion) and a cut (thin inclusion) under uniaxial tension
von: I. S. Kuz, et al.
Veröffentlicht: (2018)

Stress state of a plane wedge-shaped specimen with an edge crack under uniaxial tension
von: V. S. Kravets
Veröffentlicht: (2017)

Tension and Shear of the Transversely Isotropic Piezoceramic Plate with Circular Hole under the Mixed Boundary Conditions on Plane Sides
von: Ju. Khoma, et al.
Veröffentlicht: (2017)

Lateral vibrations of an orthotropic plate with a set of holes of arbitrary configuration and mixed boundary conditions
von: T. V. Shopa
Veröffentlicht: (2018)

On Solution of the Third Homogeneous Boundary Problem of Deformation of a Transversally Isotropic Plate with Curvilinear Hole under Omni-Directional Tension
von: Ju. Khoma, et al.
Veröffentlicht: (2016)

Stress State of the Orthotropic Piezoelectric Body with the Triaxial Ellipsoidal Inclusion under Tension
von: V. S. Kiriljuk, et al.
Veröffentlicht: (2019)

Periodic system of closely spaced holes in elastic plane under antiplane strain
von: M. P. Savruk, et al.
Veröffentlicht: (2017)

Investigation fracture of an orthotropic plate with a circular hole and two edge cracks by the method of dynamic elasticity
von: M. P. Malezhyk, et al.
Veröffentlicht: (2019)

Stress-strain state analysis of the process zone under biaxial loading of a plate with a central crack
von: Yuanli Du, et al.
Veröffentlicht: (2017)

Determination of the stressed state at the edge cracks in a plate with a complex-shape hole
von: V. V. Bozhydarnik, et al.
Veröffentlicht: (2010)

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
von: Склепус, C. М.
Veröffentlicht: (2025)

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
von: Склепус, C. М.
Veröffentlicht: (2025)

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
von: S. M. Sklepus
Veröffentlicht: (2023)

Stress State of Orthotropic Electroelastic Medium with Arbitrary Orientated Elliptic Crack under Unilateral Tension
von: V. S. Kyryliuk, et al.
Veröffentlicht: (2021)

Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)

Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)

Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: M. V. Mir-Salim-zade
Veröffentlicht: (2020)

Fracture resistanceof steels under biaxial loading in hydrogen
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2012)

Mathematical modeling of the electrostressed state in the orthotropic piezoelectric space with an arbitrary orientated circle crack under uniaxial tension
von: V. S. Kyryliuk, et al.
Veröffentlicht: (2018)

Transverse oscillations of an orthotropic plate with holesand inclusions
von: T. V. Shopa
Veröffentlicht: (2020)

Magnetoelastic Deformation of Flexible Orthotropic Annular Plate with Orthotropic Electric Conductivity and Joule Heat
von: L. V. Molchenko, et al.
Veröffentlicht: (2021)

Study of Effect of Foreign Current on the Stress State of Orthotropic Ring Plate with Orthotropic Electroconductivity
von: L. V. Molchenko, et al.
Veröffentlicht: (2014)

Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)

Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)

Equistrong hole shape for crack growth deceleration under longitudinal shear
von: N. M. Kalantarly
Veröffentlicht: (2017)

Free vibrations of pentagonal plates with a hole
von: O. Y. Hryhorenko, et al.
Veröffentlicht: (2023)

Transverse vibration of orthotropic plate of arbitrary shape with a set of supported cutouts of arbitrary configuration taking into account distributed load on the surface
von: O. I. Tuzheliak
Veröffentlicht: (2021)