Cover Image

The influence of mechanical activation modes of charge on the structure and phase composition of sintered multi-component titanium-based composites

Saved in:

Bibliographic Details
Date:	2021
Main Authors:	O. V. Baranovska, O. I. Bykov, H. A. Bahliuk, S. F. Kyryliuk
Format:	Article
Language:	English
Published:	2021
Series:	Materials Science (Physicochemical mechanics of materials)
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001255487
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Influence of phase composition on physico-mechanical properties of composites based on silicon, boron and titanium nitrides, sintered under high pressure
by: V. S. Urbanovich, et al.
Published: (2017)

The structure and properties formation of titanium-matrix composite depending on the method of sintering
by: Ye. H. Byba, et al.
Published: (2014)

The influence of hot stamping on elastic properties and anisotropy of titanium-based powder composites
by: H. A. Bahliuk, et al.
Published: (2021)

Features of the formation of structure in the sintering of multicomponent iron-glass composites
by: H. A. Bahliuk, et al.
Published: (2016)

Effect of deformation and crystal size of mechanically alloyed and tempered composite tungsten powders with titanium additives on the sintering process
by: Jahangiri, H., et al.
Published: (2018)

The influence of oxidation on the corrosion resistance of sintered titanium
by: A. A. Skrebtsov, et al.
Published: (2013)

Numerical modeling of liquid–phase infiltration in the process of sintering ceramic composites
by: V. A. Dutka
Published: (2014)

Model to control portioning for multi-component charge
by: M. O. Rybalchenko, et al.
Published: (2020)

Model to control portioning for multi-component charge
by: Rybalchenko, M.O., et al.
Published: (2020)

Investigation of the influence of high-speed sintering modes on the structure and properties of WC-based carbide composite with high entropy bonding
by: O. A. Yurkova, et al.
Published: (2024)

The structure and properties of sintered titanium blanks obtained by using phase transition
by: P. I. Loboda, et al.
Published: (2011)

The effect of ferrochrome content in the initial charge on the structure, mechanical and tribotechnical properties of Fe–Cr–C sintered carbide steel
by: Ye. S. Kyryliuk, et al.
Published: (2024)

Influence of the composition of charge components of flux-cored strips of C–Fe–Cr–Nb alloying system on chemical composition and structure of the deposited metal
by: O. P. Voronchuk, et al.
Published: (2022)

Phase formation and diamond retention in Cdiamond‒(WC‒Co)‒ZrO2 composites sintered by the spark-plasma sintering method
by: B. T. Ratov, et al.
Published: (2024)

Microstructure and properties of aluminum composites with carbide-containing master alloy and titanium carbide prepared by hot-forging
by: Yu. O. Shyshkina, et al.
Published: (2018)

New screening surface for composite components metallurgical charge. Report 1
by: I. V. Pelykh
Published: (2014)

New screening surface composite component mettallurgical charge. Report 2
by: I. V. Pelykh
Published: (2014)

Influence of sintering temperature on volume electric resistance and absorption of electromagnetic energy of pressureless sintered AlN–SiC composites
by: V. I. Chasnyk, et al.
Published: (2022)

The influence of mechanochemical treatment of sintered submicrocrystalline corundum substrates on the structure of bioglass composites
by: Staniewicz-Brudnik, B., et al.
Published: (2008)

Phase formation and physical-mechanical properties of WC–Co–CrB2 composites sintered by vacuum hot pressing for drill tools
by: B. T. Ratov, et al.
Published: (2022)

Composite material based on porous titanium, produced by vapour-phase deposition
by: L. A. Krushinskaja, et al.
Published: (2019)

Regulation of the structure and phase composition of titanium aluminides produced by zone melting
by: E. A. Asnis, et al.
Published: (2017)

Cone pelletizers sinter charge
by: V. A. Kozachishen, et al.
Published: (2009)

On the role of hydrogen in sintering of titanium powders
by: D. H. Savvakin, et al.
Published: (2011)

Study of granular steelmaking wastes as part of sinter burden composition effect on indexes of sintering process and sinter qualit
by: V. I. Bolshakov, et al.
Published: (2013)

Influence of a phase composition cast high-entropy alloys on mechanical properties
by: S. A. Firstov, et al.
Published: (2011)

Influence of heat treatment on morphology and phase composition of TEG-Co composite material
by: Matzui, L., et al.
Published: (2004)

Formation of the phase composition and microstructure of Tungsten free hard alloys with nickel molybdenum binder in the sintering process
by: A. M. Stepanchuk, et al.
Published: (2018)

Mechanical properties of ceramics based on the hafnium and titanium diborides sintered by topochemical reactions
by: I. F. Kazo, et al.
Published: (2012)

Physico-mechanical and physicochemical interaction at sintering of cBN-TiB₂ composites under ultrahigh pressure
by: Garbuz, T.O., et al.
Published: (2007)

Phase formation and physical and mechanical properties of Fe–Cu–Ni–Sn–VN composites sintered by vacuum hot pressing for diamond stone-working tools
by: V. A. Mechnyk, et al.
Published: (2022)

Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
by: V. V. Ivzhenko, et al.
Published: (2021)

Influence of mechanical activation of polytetrafluoroethylene matrix of tribotechnical composites on its structural and phase transformations and properties
by: Budnik, O.A., et al.
Published: (2015)

Compatibility and phase separation of components during the formation of epoxy-rubber compositions
by: V. V. Muzhev, et al.
Published: (2016)

Electrical characteristics of thermobaric sintered cBN–NbN composite
by: Yu. Yu. Rumiantseva, et al.
Published: (2020)

Oxidation of sintered VT1-0 titanium alloys
by: Kh. S. Shliakhetka, et al.
Published: (2018)

The influence of technology of obtaining composites based on titanium MAKh-phases on wear under contact with copper. Part I. Two-step technology
by: T. O. Prikhna, et al.
Published: (2018)

Influence of the composition of charge components in flux-cored strips of C–Fe–Cr–Mo alloying system on chemical and structural heterogeneity of the deposited metal
by: O. P. Voronchuk, et al.
Published: (2022)

Influence of electric-spark alloying by graphite on element composition of titanium and copper substrates
by: V. F. Mazanko, et al.
Published: (2015)

Multi-layered composite detectors for neutron detection
by: Ryzhikov, V.D., et al.
Published: (2018)