Buchumschlag

Properties of triacetatecellulose composite materials with additives tris|three (butoxy)(polyfluoroalkoxy)titaniumoxy| boranes

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
Hauptverfasser:	S. M. Kuzmenko, Kh. Shapka, Ya. Kuzmenko, D. S. Shapoval
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2021
Schriftenreihe:	Polymer journal
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001261465
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The modification of the cellulose threeacetate films with the products of transesterification of the tris|three(butoxy)titaneoxy|borane by stearic acid
von: S. N. Kuzmenko, et al.
Veröffentlicht: (2019)

Derivatives of tris|tri(butoxy)titanoxy|borane and polyfluorinecontaining alcohol as plasticizers of the cellulose threeacetate compositions
von: S. N. Kuzmenko, et al.
Veröffentlicht: (2020)

Tris-(diphenylphosphoryl)benzamide lanthanides (III) trinitrates as a basis for creating the luminophore materials
von: N. S. Kariaka, et al.
Veröffentlicht: (2016)

Mass Spectrometry (MALDI) of the macrobicyclic tris-dioximates iron (II)
von: C. V. Shulga, et al.
Veröffentlicht: (2011)

Properties of composite with copper matrix and addition of n-layer graphen
von: A. A. Shulzhenko, et al.
Veröffentlicht: (2019)

Quantum oscillations in coupled orbits networks of (BEDT-TTF) salts with tris(oxalato)metallate anions
von: V. N. Laukhin, et al.
Veröffentlicht: (2017)

Diamond polycrystalline composite material with dispersion-hardened nickel_based additive
von: E. E. Ashkinazi, et al.
Veröffentlicht: (2013)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: B. V. Uspenskyi, et al.
Veröffentlicht: (2022)

СТАН І ПРОДУКТИВНІСТЬ ПРИРОДНИХ ТА ШТУЧНИХ ДЕРЕВОСТАНІВ Pinus sylves tris L. ПРИДНІПРОВСЬКОГО ПІВНІЧНОГО СТЕПУ УКРАЇНИ
von: Ловинська, В. М., et al.
Veröffentlicht: (2014)

Hausdorff analytic functions in a three-dimensional associative noncommutative algebra
von: V. Shpakivskyi, et al.
Veröffentlicht: (2022)

Modified additive-averaged splitting for solving three-dimensional equations of hydrodynamics
von: Katsalova, L. N.
Veröffentlicht: (2016)

Modified additive-averaged splitting for solving three-dimensional equations of hydrodynamics
von: L. N. Katsalova
Veröffentlicht: (2016)

Additive technologies of polymeric materials (Review)
von: O. P. Masiuchok, et al.
Veröffentlicht: (2020)

INFLUENCE OF CLAY MINERAL ADDITIVES ON THE PROPERTIES OF COMPOSITE WATER–COAL FUEL.
von: Klishchenko, Roman, et al.
Veröffentlicht: (2023)

Effect of the additive of Y2O3 on the structure formation and properties of composite materials based on AlN–SiC
von: T. B. Serbeniuk, et al.
Veröffentlicht: (2018)

Electrical resistivity of pressureless sintered aluminum nitride based composite with addition of nanosized silicon carbide
von: I. P. Fesenko, et al.
Veröffentlicht: (2017)

The influence of VC-Al additive content on structure and phase composition of cBN based superhard materials
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)

Model of Finite Size Fibers in the Three-Dimensional Theory of Stability of Composite Materials (Review)
von: A. N. Guz, et al.
Veröffentlicht: (2016)

Thermal conductivity of copper with the addition of n-layer graphene
von: A. A. Shulzhenko, et al.
Veröffentlicht: (2019)

Effect of flux composition on thermal-physical and physical-chemical processes occurring in ESSLM
von: O. G. Kuzmenko
Veröffentlicht: (2012)

To the question of activating preparation of basaltic fibres as reinforcing fillers of polymeric composites
von: Ya. Kuzmenko, et al.
Veröffentlicht: (2022)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: K. A. Avramov, et al.
Veröffentlicht: (2022)

The influence of CrB2 additive on the structure and properties of diamond−(Co–Cu–Sn) composite
von: M. V. Novikov, et al.
Veröffentlicht: (2016)

The conditions of stability of two-dimensional quantum systems of three charged particles
von: I. V. Simenog, et al.
Veröffentlicht: (2013)

The conditions of stability of two-dimensional quantum systems of three charged particles
von: I. V. Symenoh, et al.
Veröffentlicht: (2013)

Electrophysical properties of diamond composite material
von: A. A. Shulzhenko, et al.
Veröffentlicht: (2017)

Production and properties of hot-pressed materials based on silicon carbide with additions of boron and titanium carbides
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2016)

Influence of doping additive on thermophysical and rheological properties of halogen-free polymer composition for cable insulation and sheaths
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2022)

A New Family of Expectiles and its Properties
von: V. Kuzmenko
Veröffentlicht: (2020)

The influence of VC–Al additive on wear resistance of cBN-based composites
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)

Coordination compounds of metals of life and bioligands as model additives to ecofriendly lubricating compositions
von: L. I. Koval, et al.
Veröffentlicht: (2015)

Influence of the CrB2 additive content on the structure, mechanical and operational properties of Сdiamond–(WC–Co) composite diamond-containing materials formed by spark plasma sintering
von: B. T. Ratov, et al.
Veröffentlicht: (2023)

The study of convergence of additive-averaged splitting based on the scheme of explicit solution for three-dimensional equations of convective diffusion
von: Katsalova, L.
Veröffentlicht: (2015)

The study of convergence of additive-averaged splitting based on the scheme of explicit solution for three-dimensional equations of convective diffusion
von: L. M. Katsalova
Veröffentlicht: (2015)

Features of influence of VN additive on the structure and properties of Fe-Cu-Ni-Sn composite produced by hot pressing
von: V. A. Mechnik, et al.
Veröffentlicht: (2018)

The influence of carbon-containing, magnetic and nano-dispersed additions on structure and electrophysical properties of polypropylene-based composite monofibers
von: L. S. Dziubenko, et al.
Veröffentlicht: (2021)