Technology of laser surfacing and properties of composite coatings on aluminium-based
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | A. P. Shatrava, L. A. Bondar, Z. L. Kozlova |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2015
|
| Назва видання: | Metal and casting of Ukraine |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000424587 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Development of the technology and equipment for laser and laser-arc welding of aluminium alloys
за авторством: G. A. Turichin, та інші
Опубліковано: (2011)
за авторством: G. A. Turichin, та інші
Опубліковано: (2011)
The influence of surface chemical treatment of D16T aluminium alloy on the protective properties of alkyd coating
за авторством: I. M. Zin, та інші
Опубліковано: (2019)
за авторством: I. M. Zin, та інші
Опубліковано: (2019)
Protective properties of aluminium-based coatings in hydrogen sulfide environments
за авторством: M. S. Khoma, та інші
Опубліковано: (2015)
за авторством: M. S. Khoma, та інші
Опубліковано: (2015)
Technological features of laser, microplasma and hybrid laser-microplasma welding of aluminium alloys
за авторством: V. D. Sheljagin, та інші
Опубліковано: (2014)
за авторством: V. D. Sheljagin, та інші
Опубліковано: (2014)
Producing of gradient coating on titanium base using method of laser surfacing
за авторством: V. K. Narva, та інші
Опубліковано: (2011)
за авторством: V. K. Narva, та інші
Опубліковано: (2011)
Laser treatment as an additional method to increase the tribotechnical properties of alloys based on cast irons alloyed with Cu and S
за авторством: E. A. Markovskij, та інші
Опубліковано: (2017)
за авторством: E. A. Markovskij, та інші
Опубліковано: (2017)
Formation of Aluminium Surface Layers’ Structure during Laser Alloying with Copper and Cobalt Powders
за авторством: Girzhon, V.V., та інші
Опубліковано: (2013)
за авторством: Girzhon, V.V., та інші
Опубліковано: (2013)
The anomalous increasing of microhardening in surface layers of aluminium alloys after the laser alloying by copper and iron
за авторством: V. V. Girzhon, та інші
Опубліковано: (2009)
за авторством: V. V. Girzhon, та інші
Опубліковано: (2009)
Treatment of surfaces of aluminium-matrix composite materials with concentrated energy sources
за авторством: N. V. Kobernik, та інші
Опубліковано: (2010)
за авторством: N. V. Kobernik, та інші
Опубліковано: (2010)
The influence of deposition technological process parameters on surface properties of multilayer coatings
за авторством: Zykova, A., та інші
Опубліковано: (2009)
за авторством: Zykova, A., та інші
Опубліковано: (2009)
Estimation of parameters of oxidative reactions during plasma or laser surface heating
за авторством: L. M. Dijuk, та інші
Опубліковано: (2018)
за авторством: L. M. Dijuk, та інші
Опубліковано: (2018)
Synthesis and physicochemical properties of silica gels with small additives of aluminium and zirconium ions
за авторством: Bondar, L.А.
Опубліковано: (2002)
за авторством: Bondar, L.А.
Опубліковано: (2002)
Formation of Aluminium Surface Layers' Structure during Laser Alloying with Copper and Cobalt Powders
за авторством: V. V. Girzhon, та інші
Опубліковано: (2013)
за авторством: V. V. Girzhon, та інші
Опубліковано: (2013)
Centrifugal rheocasting technology of aluminium alloys
за авторством: A. I. Semenchenko, та інші
Опубліковано: (2015)
за авторством: A. I. Semenchenko, та інші
Опубліковано: (2015)
Micro-welding of aluminium alloy by superposition of pulsed Nd:YAG laser and continuous diode laser
за авторством: Y. Okamoto, та інші
Опубліковано: (2013)
за авторством: Y. Okamoto, та інші
Опубліковано: (2013)
Micro-welding of aluminium alloy by superposition of pulsed Nd:YAG laser and continuous diode laser
за авторством: Okamoto, Y., та інші
Опубліковано: (2013)
за авторством: Okamoto, Y., та інші
Опубліковано: (2013)
Structure and properties of diffusion coatings of aluminium, chromium and nickel on the BT6 titanium alloy
за авторством: Ya. Smokovych, та інші
Опубліковано: (2013)
за авторством: Ya. Smokovych, та інші
Опубліковано: (2013)
Composition, structure and properties of electric spark and laser-spark ZrB2-containing coatings on titanium alloys
за авторством: V. M. Panashenko
Опубліковано: (2014)
за авторством: V. M. Panashenko
Опубліковано: (2014)
Protective impact resistant composite materials based on aluminium-silicate glass-ceramics
за авторством: Savvova, O.V., та інші
Опубліковано: (2019)
за авторством: Savvova, O.V., та інші
Опубліковано: (2019)
The influence of preliminary heating of A7075 aluminium alloy on strength of composite coating containing SiC
за авторством: T. M. Lenkovskyi, та інші
Опубліковано: (2019)
за авторством: T. M. Lenkovskyi, та інші
Опубліковано: (2019)
Electro¬catalytic properties of the amorphous metallic alloys based on iron and aluminium
за авторством: M. Kovbuz, та інші
Опубліковано: (2013)
за авторством: M. Kovbuz, та інші
Опубліковано: (2013)
Microstructure and wear-resistant properties of WC/SS316L composite coatings prepared by gas-dynamic spraying with application of laser heating
за авторством: B. Li, та інші
Опубліковано: (2016)
за авторством: B. Li, та інші
Опубліковано: (2016)
Role of protective coating in fatigue resistance of aluminium alloy welded joints
за авторством: V. A. Shonin, та інші
Опубліковано: (2009)
за авторством: V. A. Shonin, та інші
Опубліковано: (2009)
Optical properties of the Ti surface structured by femtosecond laser beam
за авторством: L. Dolgov, та інші
Опубліковано: (2011)
за авторством: L. Dolgov, та інші
Опубліковано: (2011)
Optical properties of the Ti surface structured by femtosecond laser beam
за авторством: Dolgov, L., та інші
Опубліковано: (2011)
за авторством: Dolgov, L., та інші
Опубліковано: (2011)
Novel composite fibers coated with birnessite layer
за авторством: Ju. V. Bondar
Опубліковано: (2017)
за авторством: Ju. V. Bondar
Опубліковано: (2017)
Peculiarities of laser arc consumable electrode welding of high-strength aluminium alloys
за авторством: V. D. Sheljagin, та інші
Опубліковано: (2009)
за авторством: V. D. Sheljagin, та інші
Опубліковано: (2009)
Effect of main technological parameters of plasma surfacing on properties of composite deposited metal
за авторством: A. I. Belyj
Опубліковано: (2010)
за авторством: A. I. Belyj
Опубліковано: (2010)
Selection of processing parameters for conversion coatings on high-strength aluminium alloys by cyclic voltammetry
за авторством: L. Kwiatkowski, та інші
Опубліковано: (2014)
за авторством: L. Kwiatkowski, та інші
Опубліковано: (2014)
Selection of processing parameters for conversion coatings on high-strength aluminium alloys by cyclic voltammetry
за авторством: Kwiatkowski, L., та інші
Опубліковано: (2014)
за авторством: Kwiatkowski, L., та інші
Опубліковано: (2014)
Modelling of gas - laser streams at creation of the equ
за авторством: V. P. Likhoshva, та інші
Опубліковано: (2009)
за авторством: V. P. Likhoshva, та інші
Опубліковано: (2009)
Planar waveguide structures based on nanoporous aluminium oxide films in surface plasmon resonance
за авторством: Ju. V. Ushenin, та інші
Опубліковано: (2011)
за авторством: Ju. V. Ushenin, та інші
Опубліковано: (2011)
Coatings of composite quasicrystalline aluminum-based alloy
за авторством: D. V. Hushchyk, та інші
Опубліковано: (2018)
за авторством: D. V. Hushchyk, та інші
Опубліковано: (2018)
Synthesis of novel composite fibers coated with ferrihydrite layer
за авторством: Ju. V. Bondar
Опубліковано: (2015)
за авторством: Ju. V. Bondar
Опубліковано: (2015)
Modern state and challenges for development of laser and hybrid surfacing technologies (Review)
за авторством: Ju. Khaskin, та інші
Опубліковано: (2015)
за авторством: Ju. Khaskin, та інші
Опубліковано: (2015)
Influence of solid-state laser radiation on the process of pulsed-arc welding of aluminium alloy 1561
за авторством: Y. Zhao, та інші
Опубліковано: (2024)
за авторством: Y. Zhao, та інші
Опубліковано: (2024)
Aluminium barium phosphate glass laser emitting at λ = 1.54 µm
за авторством: Dzyubenko, M.I., та інші
Опубліковано: (2008)
за авторством: Dzyubenko, M.I., та інші
Опубліковано: (2008)
Technological properties of covering masses of electrode coatings
за авторством: M. F. Gnatenko
Опубліковано: (2016)
за авторством: M. F. Gnatenko
Опубліковано: (2016)
The influence of surface treatment of iron, manganesium and aluminium alloys on the character of their wetting with water solutions
за авторством: Z. V. Slobodian, та інші
Опубліковано: (2012)
за авторством: Z. V. Slobodian, та інші
Опубліковано: (2012)
Enhancement of adhesion of diamond coating on cemented carbide by laser modified substrate surface structure pretreatment
за авторством: Zh. Lei, та інші
Опубліковано: (2021)
за авторством: Zh. Lei, та інші
Опубліковано: (2021)
Схожі ресурси
-
Development of the technology and equipment for laser and laser-arc welding of aluminium alloys
за авторством: G. A. Turichin, та інші
Опубліковано: (2011) -
The influence of surface chemical treatment of D16T aluminium alloy on the protective properties of alkyd coating
за авторством: I. M. Zin, та інші
Опубліковано: (2019) -
Protective properties of aluminium-based coatings in hydrogen sulfide environments
за авторством: M. S. Khoma, та інші
Опубліковано: (2015) -
Technological features of laser, microplasma and hybrid laser-microplasma welding of aluminium alloys
за авторством: V. D. Sheljagin, та інші
Опубліковано: (2014) -
Producing of gradient coating on titanium base using method of laser surfacing
за авторством: V. K. Narva, та інші
Опубліковано: (2011)