Buchumschlag

Effect of scheme of powder feeding into arc on its losses and efficiency of plasma-power surfacing process

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
1. Verfasser:	A. I. Som
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2015
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000468082
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Plasma-powder surfacing of composite alloys with separate feed of tungsten carbides and matrix alloy
von: A. I. Som, et al.
Veröffentlicht: (2020)

Numerical calculation of heat processes in centrifugal plasma-powder surfacing
von: A. I. Som, et al.
Veröffentlicht: (2010)

Repair of screws of extruders and automatic molding machines by plasma-arc surfacing
von: A. I. Som
Veröffentlicht: (2019)

Alloy based on iron for plasma-powder surfacing of screws for extruders and injection molding machines
von: A. I. Som
Veröffentlicht: (2016)

Effect of pulsed electrode wire feeding on formation and wear resistance of deposited bead and also losses of electrode metal in CO2 arc surfacing
von: I. V. Lendel, et al.
Veröffentlicht: (2015)

Plasma-powder surfacing of rods of power stop valves
von: E. F. Perepletchikov, et al.
Veröffentlicht: (2013)

Modernization of method of plasma surfacing with side feeding of filler wire
von: K. P. Shapovalov, et al.
Veröffentlicht: (2012)

Plasma-powder surfacing of nickel and cobalt alloys on copper and its alloys
von: E. F. Perepletchikov
Veröffentlicht: (2015)

Some ways of decreasing the losses of filler powder in microplasma surfacing
von: K. A. Jushchenko, et al.
Veröffentlicht: (2013)

Centrifugal plasma surfacing of drill pump bushings
von: O. I. Som
Veröffentlicht: (2022)

Peculiarities of formation of structure of welded joints in arc surfacing with a pulsed electrode wire feed
von: V. A. Lebedev, et al.
Veröffentlicht: (2016)

Comparative hygienic evaluation of arc welding process at constant and pulsed electrode wire feed
von: O. G. Levchenko, et al.
Veröffentlicht: (2015)

Modernization of installation A1756 system for control of plasma-powder surfacing process
von: E. F. Perepletchikov, et al.
Veröffentlicht: (2014)

Effectiveness of the process of plasma-arc spheroidization of current-conducting titanium wire
von: V. M. Korzhyk, et al.
Veröffentlicht: (2023)

Peculiarities of the microstructure and properties of iron aluminide powders obtained by the method of plasma-arc spheroidization
von: L. I. Adeeva, et al.
Veröffentlicht: (2024)

On the solution of the problem of synthesis of the control system for the process of dosed feed of electrode wire for arc welding equipment
von: Lebedev, V.A.
Veröffentlicht: (2021)

Peculiarities of metallurgical processes in plasma-arc spraying of coatings produced from steel wire with powder fillers WC and WC–Co
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Universal power source for arc welding and plasma cutting
von: A. V. Vladimirov, et al.
Veröffentlicht: (2011)

Efficiency of electrode wire melting in submerged arc surfacing with effect of transverse magnetic field
von: A. D. Razmyshljaev, et al.
Veröffentlicht: (2011)

Application of plasma-powder and electric arc coatings to increase tribocorrosion resistance of steels in aggressive environment
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2020)

Influence of longitudinal controlling magnetic field on the effectiveness of arc surfacing process
von: O. D. Razmyshliaiev, et al.
Veröffentlicht: (2021)

Influence of the parameters of the process of plasma-arc spheroidization of current-conducting wire from low-carbon steel on the granulometric composition of the produced powders
von: D. V. Strohonov, et al.
Veröffentlicht: (2022)

Wear-resistant surfacing with feeding of nanooxides to weld pool
von: V. D. Kuznetsov
Veröffentlicht: (2015)

Experimental investigation of process of plasma-arc wire spraying
von: I. P. Guljaev, et al.
Veröffentlicht: (2015)

lnluence of lux composition on the process of electroslag surfacing of end faces with discrete feeding of fller material
von: Ju. M. Kuskov
Veröffentlicht: (2018)

Efficiency of different schemes of electrodynamic treatment of AMg6 and its welded joints
von: L. M. Lobanov, et al.
Veröffentlicht: (2012)

Efficiency loss at Nash equilibria
von: V. M. Horbachuk, et al.
Veröffentlicht: (2013)

The use of powder cathodes for the deposition of Ti-Si-N coatings from a filtered vacuum arc plasma
von: V. V. Vasilev, et al.
Veröffentlicht: (2015)

On the nature of the effect of various gases on the process of condensation of coatings from a vacuum arc plasma
von: V. M. Khoroshikh, et al.
Veröffentlicht: (2009)

Suppression of current harmonics feeding powerful single-phase loads
von: I. V. Volkov, et al.
Veröffentlicht: (2019)

Effect of technological parameters on sizes of molten metal pool in plasma-arc surfacing of copper plates of MCCB moulds
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2015)

Optimization model feed efficiency through the introduction of innovative forage crops
von: I. F. Hrabchuk
Veröffentlicht: (2013)

Influence of distribution of energy losses in the elements of the autotransformer of the transformer-and-switches executive structure of the voltage stabilizer on the efficiency of using its installed power
von: K. O. Lypkivskyi, et al.
Veröffentlicht: (2019)

Effective dissociation temperature for estimation of electric arc plasma composition
von: Babich, I.L., et al.
Veröffentlicht: (2011)

Effect of technological schemes of induction surfacing on stability of deposited layer thickness
von: Ch. V. Pulka, et al.
Veröffentlicht: (2013)

Energy efficient strategies of power active filtration based on optimal decompositions of load currents and corresponding power losses
von: Yu. Artemenko, et al.
Veröffentlicht: (2020)

Alloying of surface layer of mould copper plates by the method of plasma-arc remelting
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2017)

The concept of PV power plant feeding the battery of an electricity-driven vehicle
von: V. I. Budko, et al.
Veröffentlicht: (2014)

About efficiency of vacuum-arc plasma sources with separation of drop-phase cathode erosion
von: V. M. Khoroshikh, et al.
Veröffentlicht: (2009)

Surfacing powder strips (Review)
von: A. P. Zhudra, et al.
Veröffentlicht: (2012)