Buchumschlag

Erosion resistance of chromium-nickel-silicon metal in surfacing in different shielding media

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
1. Verfasser:	Ju. I. Lopukhov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2015
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000468438
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Brazing filler metal without boron and silicon for brazing of heat-resistant nickel alloy
von: S. V. Maksimova, et al.
Veröffentlicht: (2017)

Structure and wear resistance of chromium-manganese deposited metal
von: V. L. Malinov, et al.
Veröffentlicht: (2012)

Erosion behavior of nickel diffusion membranes in conditions of water electrolysis
von: Glazunov, G.P., et al.
Veröffentlicht: (2022)

The effect of friction treatment on structure and mechanical properties of nickel and nickel-chromium coatings on copper
von: S. I. Sydorenko, et al.
Veröffentlicht: (2013)

Wear resistance of surfaced metal of type of carbon and chromium-manganese steels under conditions of dry friction of sliding of metal against metal
von: V. D. Kuznetsov, et al.
Veröffentlicht: (2013)

Formation of deformation martensite in the chromium-nickel austenitic steels
von: H. V. Snizhnoi
Veröffentlicht: (2011)

Vacuum diffusion welding of foil from powder nickel-chromium alloy
von: I. A. Gusarova, et al.
Veröffentlicht: (2017)

Joint Effect of Chromium and Nickel on Surface Morphology and Preferred Crystal Orientations of Electrodeposited Iron-Based Coatings
von: Ie. V. Kolesnyk
Veröffentlicht: (2015)

Joint Effect of Chromium and Nickel on Surface Morphology and Preferred Crystal Orientations of Electrodeposited Iron-Based Coatings
von: Kolesnyk, Ie.V.
Veröffentlicht: (2015)

Technological peculiarities of high-chromium nickel alloy complexly-alloyed with rhenium and tantalum
von: I. I. Maksjuta, et al.
Veröffentlicht: (2014)

Improvement of wear resistance of low-alloyed structural steel by its plasma-powder overlaying with the alloys based on iron, chromium and nickel
von: Ye. F. Pereplotchikov, et al.
Veröffentlicht: (2018)

Electric arc surfacing of wear-resistant iron- and nickel-based alloys on copper
von: I. O. Riabtsev, et al.
Veröffentlicht: (2022)

Dependence of corrosion behaviour of austenitic chromium-nickel steels on the paramagnetic state of austenite
von: H. V. Snizhnoi
Veröffentlicht: (2013)

Structure and properties of diffusion coatings of aluminium, chromium and nickel on the BT6 titanium alloy
von: Ya. Smokovych, et al.
Veröffentlicht: (2013)

Solid erosion-resistant coatings of Ti-B-C system, deposited in vacuum
von: Ju. Jakovchuk, et al.
Veröffentlicht: (2009)

Clusters of nickel atoms and controlling their state in silicon lattice
von: M. K. Bakhadyrkhanov, et al.
Veröffentlicht: (2018)

Clusters of nickel atoms and controlling their state in the silicon lattice
von: Bakhadyrkhanov, M.K., et al.
Veröffentlicht: (2018)

Creation of chromium carbide steel with increased wear-resistance
von: O. M. Shevchenko, et al.
Veröffentlicht: (2012)

Electronic properties of silicon surface at different oxide film conditions
von: Kirillova, S.I., et al.
Veröffentlicht: (2001)

Corrosion resistance of nanopowders of IV–VIB group metal borides and carbides in nickel plating electrolytes
von: V. V. Malyshev, et al.
Veröffentlicht: (2013)

Wear resistance and structural modification of the surface layer of high-chromium martensitic alloys under abrasive action and sliding friction
von: N. B. Efros, et al.
Veröffentlicht: (2014)

Resistance against cavitation-erosion and fatigue fracture of sheet ship building steels
von: O. I. Balytskyi, et al.
Veröffentlicht: (2014)

Effect of weld pool geometry on structure of weld metal of heat-resistant nickel alloy single crystals
von: K. A. Jushchenko, et al.
Veröffentlicht: (2013)

Peculiarities of cavitation-erosion fracture of D16T alloy with electrolytic nickel and compositional Ni–B coatings in corrosive environment
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2016)

Plasma guns of an erosion type with the pulse-periodic gas-metal injection
von: Vinnikov, D.V., et al.
Veröffentlicht: (2022)

On the prediction of erosive wear of the heat-transfer surfaces of boiler equipment
von: Yatsenko V.P.
Veröffentlicht: (2006)

Features of Structure Formation in High-Chromium Heat-Resistant Alloys with Directed Crystallization
von: A. V. Narivskij, et al.
Veröffentlicht: (2019)

Influence of low nickel contents on the surface tension and density of nickel–indium melts
von: S. I. Mudryi, et al.
Veröffentlicht: (2017)

Influence of low nickel contents on the surface tension and density of nickel–indium melts
von: S. I. Mudryi, et al.
Veröffentlicht: (2017)

Kinetics of Mechanically Induced Separation of Chromium-Nickel Steels with Regard for Generation of Point Defects by Glide Dislocations during SPD
von: V. N. Varjukhin, et al.
Veröffentlicht: (2013)

Studying the changes in the mechanical properties of neutron-irradiated chromium-nickel steels using the “Shear Punch” method
von: Maksimkin, О.P., et al.
Veröffentlicht: (2019)

Magnetic hysteresis and Curie temperature in nickel-chromium ferrites synthesized by sol-gel auto-combustion method
von: V. S. Bushkova
Veröffentlicht: (2017)

Magnetic hysteresis and Curie temperature in nickel-chromium ferrites synthesized by sol-gel auto-combustion method
von: V. S. Bushkova
Veröffentlicht: (2017)

Thermal expansion of chromium-rich iron-based or iron/nickel-based alloys reinforced by tantalum carbides
von: P. Berthod, et al.
Veröffentlicht: (2011)

Thermal expansion of chromium-rich iron-based or iron/nickel-based alloys reinforced by tantalum carbides
von: Berthod, P., et al.
Veröffentlicht: (2011)

Physical prerequisites of construction of mathematical models of electric resistance of plasma-erosive loads
von: N. A. Shydlovska, et al.
Veröffentlicht: (2017)

Electron beam melting of heat-resistant alloys on nickel base
von: S. V. Akhonin, et al.
Veröffentlicht: (2015)

Erosion of Acicular Nanocrystals Surface under Bombardment by Inert Gases Ions
von: O. V. Dudka, et al.
Veröffentlicht: (2013)

Corrosion and erosion resistance of copper and molybdenum composite materials condensed from the vapour phase
von: I. M. Hrechaniuk, et al.
Veröffentlicht: (2020)

Erosion-resistant multi-layer coatings on base of carbide and titanium nitride with ductile interlayers
von: E. V. Dabizha, et al.
Veröffentlicht: (2010)