Buchumschlag

Effect of cooling mode after diffusion welding and brazing on residual stresses in graphite—copper edge joints

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
Hauptverfasser:	V. V. Kvasnitskij, G. V. Ermolaev, M. V. Matvienko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2015
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000468492
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Diffusion welding and brazing of dissimilar materials with controlled stress-strain state
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2018)

Residual stresses in thin-sheet zinc-coated steel joints after arc welding and plasma brazing
von: S. V. Maksymova, et al.
Veröffentlicht: (2020)

Mechanical properties of brazed joints of dispersion-strengthened copper alloy
von: S. V. Maksimova, et al.
Veröffentlicht: (2010)

Stressed state of welded and brazed components from similar materials with a soft interlayer under axial loading
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2018)

Stress-strain state of welded and brazed units from dissimilar materials with soft interlayer at thermal loading
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2019)

Stress-strain state of welded and brazed assemblies of dissimilar materials with soft interlayer at temperature-strength loading
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2019)

Influence of stress-strain state on the structure and properties of joints in diffusion welding of dissimilar metals
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2014)

Evaluation of strength of joints produced by welding with concurrent brazing
von: V. I. Savuljak, et al.
Veröffentlicht: (2015)

Microstructure of brazed joints of nickel aluminides
von: S. V. Maksimova, et al.
Veröffentlicht: (2014)

Producing nitinol brazed joints (Review)
von: S. V. Maksymova, et al.
Veröffentlicht: (2022)

Formation of brazed joints of titanium aluminide
von: S. V. Maksimova
Veröffentlicht: (2009)

About the possibility of brazing of niobium to alumina VK94-1 ceramics by copper and copper-nickel brazing fillers without applying pressure
von: V. S. Zhuravlev
Veröffentlicht: (2015)

Features of the structure of molybdenum-covar brazed joints
von: S. V. Maksymova, et al.
Veröffentlicht: (2022)

Vacuum brazing of kovar–molybdenum dissimilar joints
von: S. V. Maksymova, et al.
Veröffentlicht: (2021)

Phase transformations in the extruded brazing copper based alloys
von: V. K. Nosenko, et al.
Veröffentlicht: (2015)

Experimental evaluation of pulse electric current effect on residual stresses in composite-to-copper joints
von: Stepanov, G.V., et al.
Veröffentlicht: (2008)

Possibility of reduction in growth of intermetallic interlayer during brazing of steel using brazing alloys copper-phosphorus
von: A. A. Pisarev, et al.
Veröffentlicht: (2016)

Autovacuum brazing in repair of copper panels of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Effect of gap value and initial state of brazing alloy of structure formation of titanium alloy brazed joints
von: S. V. Maksimova, et al.
Veröffentlicht: (2013)

Brazing as a Promising Method of Producing Permanent Joints
von: S. V. Maksymova
Veröffentlicht: (2020)

Properties of steel-copper bimetal produced by brazing in autonomous vacuum
von: I. P. Serebrjanik, et al.
Veröffentlicht: (2018)

Assessment of residual life of vertical welded joints of tanks after 20-25 years of service
von: Ju. Barvinko
Veröffentlicht: (2009)

Strength of heat-resistant nickel alloy Inconel 718 brazed joints, produced using palladium brazing alloys
von: V. F. Khorunov, et al.
Veröffentlicht: (2010)

Producing dissimilar joints of molybdenum–stainless steel using vacuum brazing
von: S. V. Maksimova, et al.
Veröffentlicht: (2017)

Strength and microstructure of ZhS6U alloy brazed joints produced using complex boron- and silicon-containing brazing alloys
von: A. F. Beljavin, et al.
Veröffentlicht: (2010)

Effect of aspect ratio of cylindrical parts from dissimilar materials on their stress-strain state in diffusion bonding
von: V. F. Kvasnitskij, et al.
Veröffentlicht: (2009)

Deposition of protective coatings on copper panels of MCCB moulds by autovacuum brazing method
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2016)

Role of forming device on structure and phase composition of joints produced in press butt braze welding
von: A. S. Pismennyj, et al.
Veröffentlicht: (2010)

Evaluation of Residual Stresses in Carbon/Carbon Composites Components Joined to Copper before and after Pulse Electromagnetic Treatment
von: Stepanov, G.V., et al.
Veröffentlicht: (2011)

Brazing of ZrO2-ceramic to metal by silver—copper—oxygen filler on the air
von: A. V. Durov
Veröffentlicht: (2014)

Optimization of the cooling mode of circulating water in atomizing cooling towers
von: Shraiber O.A., et al.
Veröffentlicht: (2007)

Influence of electric-spark alloying by graphite on element composition of titanium and copper substrates
von: V. F. Mazanko, et al.
Veröffentlicht: (2015)

Fatigue resistance of steel welded joints of different strength with final residual stresses
von: V. A. Degtjarev
Veröffentlicht: (2018)

Physical and mechanical properties of transition zone of bimetal produced by autonomous vacuum brazing of copper on steel
von: M. G. Atroshenko, et al.
Veröffentlicht: (2015)

Stress-strain state of cylindrical sub-assemblies in diffusion welding
von: V. I. Makhnenko, et al.
Veröffentlicht: (2009)

Brazing of titanium alloys using brazing alloys based on aluminium
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Microstructure and hardness of metal of welded joints of aluminium-copper alloy
von: R. Alapati, et al.
Veröffentlicht: (2009)

Residual error after non-uniformity correction
von: Borovytsky, V.N.
Veröffentlicht: (2000)

Influence of welding modes on decarburization in the haz of R91 steel in welded joints of dissimilar steels after high-temperature tempering
von: M. O. Nimko, et al.
Veröffentlicht: (2022)

Investigation of the microstructure of aluminum and magnesium joints during diffusion welding
von: L. V. Petrushynets, et al.
Veröffentlicht: (2024)