Buchumschlag

Cyclic strength of damaged tee joint

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
Hauptverfasser:	P. S. Jukhimets, S. V. Kobelskij, V. V. Filipenkov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2015
Schriftenreihe:	Technical diagnostics and non-destructive testing
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000468828
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Evaluation Of Residual Life Of A Damaged T-Joint
von: P. S. Jukhimets
Veröffentlicht: (2015)

Tees-Distributors for Bowcases of Golden Horde Period
von: M. S. Osypenko
Veröffentlicht: (2017)

Improvement of cyclic life of welded joints with accumulated fatigue damages by using the high-frequency peening
von: V. V. Knysh, et al.
Veröffentlicht: (2010)

Effect of corrosion damages on cyclic life of welded T-joints treated by high-frequency mechanical peening
von: V. V. Knysh, et al.
Veröffentlicht: (2016)

Increasing the Fatigue Strength of Welding Joints with Accumulasted Fatigue Damages by Surface Plastic Deformation
von: V. V. Knysh, et al.
Veröffentlicht: (2024)

Influence of corrosion damages on cyclic life of butt welded joints strengthened by high-frequency mechanical peening
von: V. V. Knysh, et al.
Veröffentlicht: (2018)

Geometry-dependent residual life of a pipeline with corrosion damage
von: P. S. Jukhimets
Veröffentlicht: (2010)

Influence of alloying and thermal treatment on strength and cyclic crack resistance of Al–Cu–Mg alloy welded joints. P. 2
von: T. M. Labur, et al.
Veröffentlicht: (2017)

Influence of alloying and thermal treatment on strength and cyclic crack resistance of Al–Cu–Mg alloy welded joints. P. 1
von: T. M. Labur, et al.
Veröffentlicht: (2017)

Probable use of regional situational centers of the intellectual system «Сontrol_TEE» using UAVs
von: Pisarenko, J.V., et al.
Veröffentlicht: (2023)

Investigation of possability to determine the degree of metal damage at cyclic loading in welded joints of structural steel 09G2S using magnetometric method
von: V. I. Zagrebelnyj, et al.
Veröffentlicht: (2011)

Improvement of cyclic life of welded T-joints with surface cracks
von: V. V. Knysh, et al.
Veröffentlicht: (2009)

Nonlinearity of the Rock Joint Shear Strength
von: Wei, Y.F., et al.
Veröffentlicht: (2015)

Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: M. H. Shulzhenko, et al.
Veröffentlicht: (2011)

Specificities of Estimating the Effect of Load Asymmetry on Fatigue Strength and Cyclic Durability
von: А. D. Pogrebnyak
Veröffentlicht: (2024)

The key algorithm of a mode-matching technique for the analysis of resonance posts, tee, turnstile and other types of multiport junctions
von: A. A. Kirilenko, et al.
Veröffentlicht: (2016)

Structural criteria of strength and crack resistance of high-strength steels and their welded joints
von: O. M. Berdnikova
Veröffentlicht: (2021)

The influence of welding energy on strength of high-strength S960QC steel joints
von: I. R. Dzioba, et al.
Veröffentlicht: (2019)

Assessment of contact strength of bolted joints of composite plates
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2019)

Evaluation of strength of joints produced by welding with concurrent brazing
von: V. I. Savuljak, et al.
Veröffentlicht: (2015)

Peculiarities of damageability of welded joints of steam pipelines by creep mechanism
von: V. V. Dmitrik, et al.
Veröffentlicht: (2010)

Strength and cyclic crack growth resistance of thermally deformed Al–Mg–Sc alloys
von: O. P. Ostash, et al.
Veröffentlicht: (2021)

Structural condition and damage of metal of welded joints of steam pipelines
von: V. V. Dmytryk, et al.
Veröffentlicht: (2021)

Structural condition and fatigue damageability of welded joints of steam pipelines
von: V. V. Dmytryk, et al.
Veröffentlicht: (2020)

Selection of processing parameters for conversion coatings on high-strength aluminium alloys by cyclic voltammetry
von: L. Kwiatkowski, et al.
Veröffentlicht: (2014)

Research of Dependences of the Generalized Complex Sizes of a Double Waveguide tee From Operating Modes Over High-frequency Chains of the Radiometric Device of Control
von: V. P. Kutsenko
Veröffentlicht: (2013)

Probability characteristics of resistance of welded joints of structural steels to multi-cyclic fatigue
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)

Strength and specifics of fracture of welded joints of high-strength aluminium alloys at low temperature
von: T. M. Labur
Veröffentlicht: (2011)

Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Investigation of influence of plasticity materials on tensile strength of the composite joint
von: M. V. Dudyk, et al.
Veröffentlicht: (2013)

Formation of cold cracks in welded joints of high-strength steels with 350-850 MPa yield strength
von: L. M. Lobanov, et al.
Veröffentlicht: (2013)

Effect of impact treatment of weld metal on strength of welded joint
von: A. S. Pismennyj, et al.
Veröffentlicht: (2010)

Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
von: N. G. Shulzhenko, et al.
Veröffentlicht: (2015)

Improvement of cyclic life of metallic materials and welded joints by a pulsed current treatment
von: G. V. Stepanov, et al.
Veröffentlicht: (2010)

Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)

Effect of thermodynamic cyclic loads for high-strength diamond wear mechanism destroying mountain breed
von: A. M. Isonkin, et al.
Veröffentlicht: (2019)

Hydraulic testing of pipe sections with corrosion damage in the mode of low-cycle loading
von: P. S. Jukhimets, et al.
Veröffentlicht: (2013)

Defects of joints of high-strength rails, made by flash-butt welding
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2013)

Physico-mechanical properties of welded joints of high-strength steel with the yield strength of 690…1300 MPa
von: O. M. Berdnikova
Veröffentlicht: (2021)