Investigation of thermal stability organic plastics based of polysulfonamide reinforced by fiber Kevlar
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | A. I. Burja, N. T. Arlamova, S. Van, S. P. Suchilina-Sokolenko, I. Lin |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2015
|
| Назва видання: | Polymer journal |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000508518 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Research of structure and properties polytetrafluoroethylene reinforced fiber arselon
за авторством: A. I. Burja, та інші
Опубліковано: (2017)
за авторством: A. I. Burja, та інші
Опубліковано: (2017)
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
за авторством: Kim, J.W.
Опубліковано: (2016)
за авторством: Kim, J.W.
Опубліковано: (2016)
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
за авторством: Sheng, L.Y., та інші
Опубліковано: (2019)
за авторством: Sheng, L.Y., та інші
Опубліковано: (2019)
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
за авторством: Sheng, L.Y., та інші
Опубліковано: (2018)
за авторством: Sheng, L.Y., та інші
Опубліковано: (2018)
Numerical Study of Stability Loss of Near-thesurface Short Fibers in a Purely Reinforced Compossite Material
за авторством: V. A. Dekret, та інші
Опубліковано: (2021)
за авторством: V. A. Dekret, та інші
Опубліковано: (2021)
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
за авторством: Ji, S.J., та інші
Опубліковано: (2015)
за авторством: Ji, S.J., та інші
Опубліковано: (2015)
Prediction of fiber-reinforced concrete strength under compression
за авторством: V. P. Sylovaniuk, та інші
Опубліковано: (2016)
за авторством: V. P. Sylovaniuk, та інші
Опубліковано: (2016)
Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
за авторством: V. R. Skalskyi, та інші
Опубліковано: (2020)
за авторством: V. R. Skalskyi, та інші
Опубліковано: (2020)
CT study of products from non-metallic composites reinforced by carbon fibers
за авторством: Levenets, V.V., та інші
Опубліковано: (2022)
за авторством: Levenets, V.V., та інші
Опубліковано: (2022)
Methods of strength and life time evaluation of fiber reinforced concretes (A review)
за авторством: Ye. Andreikiv, та інші
Опубліковано: (2018)
за авторством: Ye. Andreikiv, та інші
Опубліковано: (2018)
Improvement of Strength and Radiation Protection Properties of Biodegradable Jute Fiber Reinforced Material
за авторством: Verma, S., та інші
Опубліковано: (2017)
за авторством: Verma, S., та інші
Опубліковано: (2017)
Study of influence of structurizing regims on the properties of structural glass-fiber plastics
за авторством: Karandashov, O.H., та інші
Опубліковано: (2018)
за авторством: Karandashov, O.H., та інші
Опубліковано: (2018)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
за авторством: Bounouas, L., та інші
Опубліковано: (2001)
за авторством: Bounouas, L., та інші
Опубліковано: (2001)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
за авторством: J. Y. Lee, та інші
Опубліковано: (2014)
за авторством: J. Y. Lee, та інші
Опубліковано: (2014)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
за авторством: Lee, J.Y., та інші
Опубліковано: (2014)
за авторством: Lee, J.Y., та інші
Опубліковано: (2014)
Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
за авторством: Daneshfar, M., та інші
Опубліковано: (2017)
за авторством: Daneshfar, M., та інші
Опубліковано: (2017)
Study of thermophysical characteristics of graphite plastics based on phenylone
за авторством: A. I. Burja, та інші
Опубліковано: (2018)
за авторством: A. I. Burja, та інші
Опубліковано: (2018)
Examination of the cracking resistance of corrosionresisting glass-reinforced plastics by acoustic emission methods
за авторством: Naumets, V.N., та інші
Опубліковано: (1985)
за авторством: Naumets, V.N., та інші
Опубліковано: (1985)
Finite Element Analysis of Thermoelastic Fiber-Reinforced Anisotropic Hollow Cylinder with Dual-Phase-Lag Model
за авторством: Hobiny, A.D., та інші
Опубліковано: (2018)
за авторством: Hobiny, A.D., та інші
Опубліковано: (2018)
Device for investigating thermal stability of characteristics of voltage-to-frequiency converters
за авторством: V. A. Zavadskyi, та інші
Опубліковано: (2021)
за авторством: V. A. Zavadskyi, та інші
Опубліковано: (2021)
Investigation of thermal stability of deposited metal designed for restoration of mill rolls
за авторством: A. A. Babinets, та інші
Опубліковано: (2014)
за авторством: A. A. Babinets, та інші
Опубліковано: (2014)
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
за авторством: Huang, T., та інші
Опубліковано: (2016)
за авторством: Huang, T., та інші
Опубліковано: (2016)
Porous Fiber Plastics as Chemisorbents from Ion-Exchange Fibrous Materials Wastes for Respiratory Purpose
за авторством: A. A. Ennan, та інші
Опубліковано: (2010)
за авторством: A. A. Ennan, та інші
Опубліковано: (2010)
Plastic exfoliation of square-shaped fiber under shear load in the presence of interfacial cracks
за авторством: V. A. Kryven, та інші
Опубліковано: (2014)
за авторством: V. A. Kryven, та інші
Опубліковано: (2014)
Plastic scintillators for thermal neutrons detection
за авторством: Nemchenok, I.B., та інші
Опубліковано: (2013)
за авторством: Nemchenok, I.B., та інші
Опубліковано: (2013)
Stability of a discretely reinforced plate in gas flow
за авторством: B. A. Antufev
Опубліковано: (2013)
за авторством: B. A. Antufev
Опубліковано: (2013)
Thermal stability of ultrahard polycrystalline diamond composite materials
за авторством: Meng, D., та інші
Опубліковано: (2015)
за авторством: Meng, D., та інші
Опубліковано: (2015)
Thermal stability of ultrahard polycrystalline diamond composite materials
за авторством: D. Meng, та інші
Опубліковано: (2015)
за авторством: D. Meng, та інші
Опубліковано: (2015)
Thermal decomposition of plastics is the basis for their utilization
за авторством: L. A. Romanova, та інші
Опубліковано: (2015)
за авторством: L. A. Romanova, та інші
Опубліковано: (2015)
Investigation of the Process of Obtaining Polystyrene Models with Macro-reinforcement Elements
за авторством: V. A. Sljusarev, та інші
Опубліковано: (2018)
за авторством: V. A. Sljusarev, та інші
Опубліковано: (2018)
The Effect of Hydrostatic Initial Stress on the Plane Waves in a Fiber-Reinforced Magneto-Thermoelastic Medium with Fractional Derivative Heat Transfer
за авторством: N. Sarkar, та інші
Опубліковано: (2016)
за авторством: N. Sarkar, та інші
Опубліковано: (2016)
The Effect of Hydrostatic Initial Stress on the Plane Waves in a Fiber-Reinforced Magneto-Thermoelastic Medium with Fractional Derivative Heat Transfer
за авторством: Sarkar, N., та інші
Опубліковано: (2016)
за авторством: Sarkar, N., та інші
Опубліковано: (2016)
On the low-temperature anomalies in the thermal conductivity of plastically deformed crystals due to phonon–kink scattering
за авторством: van Ostaay, J.A.M., та інші
Опубліковано: (2012)
за авторством: van Ostaay, J.A.M., та інші
Опубліковано: (2012)
Self-organization of crystals during the plastic deformation
за авторством: E. E. Zasimchuk, та інші
Опубліковано: (2013)
за авторством: E. E. Zasimchuk, та інші
Опубліковано: (2013)
Investigation of the behavior of gadolinium complexes in plastic scintillators
за авторством: Velmozhnaya, E.S., та інші
Опубліковано: (2013)
за авторством: Velmozhnaya, E.S., та інші
Опубліковано: (2013)
Investigation of planar quantum functional polymer nanolayers structures on rolybenzimidazole fiber nanosheets
за авторством: O. V. Balaban, та інші
Опубліковано: (2017)
за авторством: O. V. Balaban, та інші
Опубліковано: (2017)
Thermal stability of organic-inorganic nanocomposites based on system of dimethacrylate-tetraethoxysilane and their kinetic features
за авторством: H. I. Khovanets, та інші
Опубліковано: (2016)
за авторством: H. I. Khovanets, та інші
Опубліковано: (2016)
Investigation of properties of nanocomposites based on aromatic polyamide and fullerene black
за авторством: A. I. Burja, та інші
Опубліковано: (2012)
за авторством: A. I. Burja, та інші
Опубліковано: (2012)
Cellulose Obtaining from Short Flax Fiber by Oxidative and Organic Solvent Delignification
за авторством: I. M. Dejkun, та інші
Опубліковано: (2011)
за авторством: I. M. Dejkun, та інші
Опубліковано: (2011)
Determination of mechanical characteristics and specific fracture energy of thermal strengthened reinforcement
за авторством: K. Zanh, та інші
Опубліковано: (2014)
за авторством: K. Zanh, та інші
Опубліковано: (2014)
Схожі ресурси
-
Research of structure and properties polytetrafluoroethylene reinforced fiber arselon
за авторством: A. I. Burja, та інші
Опубліковано: (2017) -
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
за авторством: Kim, J.W.
Опубліковано: (2016) -
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
за авторством: Sheng, L.Y., та інші
Опубліковано: (2019) -
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
за авторством: Sheng, L.Y., та інші
Опубліковано: (2018) -
Numerical Study of Stability Loss of Near-thesurface Short Fibers in a Purely Reinforced Compossite Material
за авторством: V. A. Dekret, та інші
Опубліковано: (2021)