Concentration stratification and structural changes in the Fe–Ni–Cr alloy after the warm twist deformation
Gespeichert in:
| Datum: | 2015 |
|---|---|
| Hauptverfasser: | B. M. Efros, A. I. Derjagin, L. S. Metlov, V. A. Ivchenko, N. B. Efros, V. N. Varjukhin |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2015
|
| Schriftenreihe: | High Pressure Physics and Engineering |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000544350 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Structure of low-carbon steel after a warm twist extrusion
von: O. H. Pashynska
Veröffentlicht: (2013)
von: O. H. Pashynska
Veröffentlicht: (2013)
Characteristics and properties of protecting coatings based on Ni-Cr and Co-Cr after concentrated energy flow processing
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2005)
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2005)
Wear resistance and structural modification of the surface layer of high-chromium martensitic alloys under abrasive action and sliding friction
von: N. B. Efros, et al.
Veröffentlicht: (2014)
von: N. B. Efros, et al.
Veröffentlicht: (2014)
Structure Fe - Cr - Mn – N steel after pressure deformation and cavitation wear
von: P. M. Kucherenko
Veröffentlicht: (2018)
von: P. M. Kucherenko
Veröffentlicht: (2018)
The texture features of the deformed CrMnFeCoNi2Cu high-entropy alloy
von: M. V. Karpets, et al.
Veröffentlicht: (2015)
von: M. V. Karpets, et al.
Veröffentlicht: (2015)
The features of structure formation at synthesis of high entropy alloys of Al – Cr – Fe – Ni – Cu, Al – Ti – Cr – Fe – Ni – Cu and Ti – Cr – Fe – Ni – Cu systems by means of powder metallurgy
von: H. A. Bahliuk, et al.
Veröffentlicht: (2015)
von: H. A. Bahliuk, et al.
Veröffentlicht: (2015)
On the Total CR Twist of Transversal Curves in the 3-Sphere
von: Musso, Emilio, et al.
Veröffentlicht: (2023)
von: Musso, Emilio, et al.
Veröffentlicht: (2023)
Influence of a cold plastic deformation on the electrical resistivity of CrMnFeCoNi high-entropy alloy
von: Yu. P. Mazur, et al.
Veröffentlicht: (2017)
von: Yu. P. Mazur, et al.
Veröffentlicht: (2017)
Influence of a cold plastic deformation on the electrical resistivity of CrMnFeCoNi high-entropy alloy
von: Yu. P. Mazur, et al.
Veröffentlicht: (2017)
von: Yu. P. Mazur, et al.
Veröffentlicht: (2017)
Comparative study of helium bubble formation in Cr-Fe-Ni-Mn high-entropy alloy and 18Cr10NiTi steel after irradiation and post-irradiation annealing
von: Kalchenko, А.S., et al.
Veröffentlicht: (2019)
von: Kalchenko, А.S., et al.
Veröffentlicht: (2019)
κ-Deformed Phase Space, Hopf Algebroid and Twisting
von: Jurić, T., et al.
Veröffentlicht: (2014)
von: Jurić, T., et al.
Veröffentlicht: (2014)
Структура високоентропійних сплавів CrMnFeCoNi і CrMnFeCoNi₂Cu та термостабільність їх електротранспортних властивостей
von: Крапівка, М.О., et al.
Veröffentlicht: (2015)
von: Крапівка, М.О., et al.
Veröffentlicht: (2015)
Structure and mechanical properties of high-entropy AlCuNiFeCr and AlCuNiFeCrTi coatings obtained by electron beam surfacing
von: O. I. Yurkova, et al.
Veröffentlicht: (2017)
von: O. I. Yurkova, et al.
Veröffentlicht: (2017)
Hopf Algebroid Twists for Deformation Quantization of Linear Poisson Structures
von: Meljanac, S., et al.
Veröffentlicht: (2018)
von: Meljanac, S., et al.
Veröffentlicht: (2018)
Producing of thick vacuum condensates of high-entropic alloys CrFeCoNiCu and AlCrFeCoNiCu by the method of electron beam deposition
von: A. I. Ustinov, et al.
Veröffentlicht: (2019)
von: A. I. Ustinov, et al.
Veröffentlicht: (2019)
Structure of the High-Entropy CrMnFeCoNi and CrMnFeCoNi2Cu Alloys and Thermal Stability of Its Electrical Transport Properties
von: M. O. Krapivka, et al.
Veröffentlicht: (2015)
von: M. O. Krapivka, et al.
Veröffentlicht: (2015)
Effect of thermoplastic treatment on the structure, the texture and the mechanical properties of stainless maraging steel
von: B. M. Efros, et al.
Veröffentlicht: (2016)
von: B. M. Efros, et al.
Veröffentlicht: (2016)
Structure and properties of hybrid materials based on a sandwich-type nitrogen-containing alloy. 1. Phase and structure transformations
von: B. M. Efros, et al.
Veröffentlicht: (2016)
von: B. M. Efros, et al.
Veröffentlicht: (2016)
Composite powders based on FeMoNiCrB amorphizing alloy with
von: Yu. S. Borysov, et al.
Veröffentlicht: (2021)
von: Yu. S. Borysov, et al.
Veröffentlicht: (2021)
Influence of plastic deformation on the phase composition, texture, and mechanical properties of the CrMnFeCoNi2Cu high-entropy alloy
von: M. V. Karpets, et al.
Veröffentlicht: (2015)
von: M. V. Karpets, et al.
Veröffentlicht: (2015)
Determination of warming modes for convoluted tubules of rat's testes after vitrification
von: N. O. Volkova, et al.
Veröffentlicht: (2021)
von: N. O. Volkova, et al.
Veröffentlicht: (2021)
On the practical application of the 18Cr10NiTi steel after barocryodeformation
von: P. A. Khajmovich
Veröffentlicht: (2016)
von: P. A. Khajmovich
Veröffentlicht: (2016)
High-Temperature Diffractometry Study of Features of the FeCoNiMnCr Alloy Oxidation
von: M. V. Karpets, et al.
Veröffentlicht: (2014)
von: M. V. Karpets, et al.
Veröffentlicht: (2014)
High pressure effects in severe plastic deformation
von: Varyukhin, V.N., et al.
Veröffentlicht: (2004)
von: Varyukhin, V.N., et al.
Veröffentlicht: (2004)
Kinetics of Mechanically Induced Separation of Chromium-Nickel Steels with Regard for Generation of Point Defects by Glide Dislocations during SPD
von: V. N. Varjukhin, et al.
Veröffentlicht: (2013)
von: V. N. Varjukhin, et al.
Veröffentlicht: (2013)
Особливості взаємодії лігатури Fe-Ni-Cr-Cu-Mn з сірим чавуном
von: Parkhomchuk, Zh. V., et al.
Veröffentlicht: (2024)
von: Parkhomchuk, Zh. V., et al.
Veröffentlicht: (2024)
Magnetometric assessment of the influence of chemical elements on corrosion of austenitic Fe–Cr–Ni alloys
von: G. V. Snizhnoi, et al.
Veröffentlicht: (2024)
von: G. V. Snizhnoi, et al.
Veröffentlicht: (2024)
Распределение элементов в сплавах системы Cu-(Ni-Si)-(Fe-Cr-С)
von: Трубаченко, Л.Н., et al.
Veröffentlicht: (2012)
von: Трубаченко, Л.Н., et al.
Veröffentlicht: (2012)
Deformation hardening of W–Ni–Fe alloy by cold multi-cycle reduction
von: Ye. Sheikin, et al.
Veröffentlicht: (2020)
von: Ye. Sheikin, et al.
Veröffentlicht: (2020)
Thermally activated deformation of nanocrystalline and coarse grained CoCrFeNiMn high entropy alloy in the temperature range 4.2–350 K
von: A. V. Podolskiy, et al.
Veröffentlicht: (2018)
von: A. V. Podolskiy, et al.
Veröffentlicht: (2018)
Twist extrusion
von: Y. Beygelzimer, et al.
Veröffentlicht: (2014)
von: Y. Beygelzimer, et al.
Veröffentlicht: (2014)
Tracer Diffusion of Cobalt in High-Entropy Alloys AlxFeNiCoCuCr
von: Nadutov, V.M., et al.
Veröffentlicht: (2017)
von: Nadutov, V.M., et al.
Veröffentlicht: (2017)
Regularities of structure formation in the system diamond–Fe–Cu–Ni–Sn–CrB2
von: V. A. Mechnyk
Veröffentlicht: (2013)
von: V. A. Mechnyk
Veröffentlicht: (2013)
Comparative analysis of structure and properties of electrodeposited coatings from iron and Fe – Cr – Ni alloy
von: Ye. V. Kolesnyk, et al.
Veröffentlicht: (2016)
von: Ye. V. Kolesnyk, et al.
Veröffentlicht: (2016)
Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
von: M. I. Pashechko
Veröffentlicht: (2010)
von: M. I. Pashechko
Veröffentlicht: (2010)
Structure and properties of coatings Ni-Cr-B-Si-Fe-WC-Co deposited on steel and copper substrates
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2008)
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2008)
Ultrasonic study of as-cast heterogeneous high-entropy alloy AlCuCrCoNiFe
von: V. M. Nadutov, et al.
Veröffentlicht: (2016)
von: V. M. Nadutov, et al.
Veröffentlicht: (2016)
Twisted and False-Twisted Torques from the Bosporan Toreutic Workshops
von: L. I. Babenko
Veröffentlicht: (2019)
von: L. I. Babenko
Veröffentlicht: (2019)
Power industry of Ukraine and realities of the global warming
von: O. V. Kyryleko, et al.
Veröffentlicht: (2020)
von: O. V. Kyryleko, et al.
Veröffentlicht: (2020)
Зносотривкість евтектичних покривів системи Fe–Mn–C–B, легованих Si, Ni і Cr
von: Пашечко, М.І.
Veröffentlicht: (2010)
von: Пашечко, М.І.
Veröffentlicht: (2010)
Ähnliche Einträge
-
Structure of low-carbon steel after a warm twist extrusion
von: O. H. Pashynska
Veröffentlicht: (2013) -
Characteristics and properties of protecting coatings based on Ni-Cr and Co-Cr after concentrated energy flow processing
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2005) -
Wear resistance and structural modification of the surface layer of high-chromium martensitic alloys under abrasive action and sliding friction
von: N. B. Efros, et al.
Veröffentlicht: (2014) -
Structure Fe - Cr - Mn – N steel after pressure deformation and cavitation wear
von: P. M. Kucherenko
Veröffentlicht: (2018) -
The texture features of the deformed CrMnFeCoNi2Cu high-entropy alloy
von: M. V. Karpets, et al.
Veröffentlicht: (2015)