Effect of drawing dies with shear on the structure and the properties of low-carbon steel

Effect of drawing dies with shear on the structure and the properties of low-carbon steel

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
Hauptverfasser:	E. G. Pashinskaja, A. V. Zavdoveev, A. A. Maksakova, V. N. Varjukhin, A. A. Tolpa, V. M. Tkachenko
Format:	Artikel
Sprache:	English
Veröffentlicht:	2015
Schriftenreihe:	High Pressure Physics and Engineering
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000544355
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Drawing with shear as an effective method of the control of the structure and the properties for low-carbon steel
von: Pashinskaya, E., et al.
Veröffentlicht: (2015)

Energy dissipation during the tension of the St3 steel produced by severe plastic deformation by the rolling with shear
von: E. G. Pashinskaja, et al.
Veröffentlicht: (2016)

Production Efficiency of Ribbon-Type Sections by the Drawing Method in Doubled-Roll Roller Dies
von: V. G. Razdobreev, et al.
Veröffentlicht: (2023)

Features of the phase-structural transformations during tempering of the low-alloyed steels for hot working dies
von: S. V. Bobyr, et al.
Veröffentlicht: (2012)

Study of structure and physicochemical and mechanical properties in low-carbon steel after cyclic loading
von: Gorbachyov, L.A., et al.
Veröffentlicht: (2009)

Structure and formation peculiarities of the properties of die tool steel R6M5
von: Yu. Volosevych, et al.
Veröffentlicht: (2013)

Direct martensitic transformations of low-carbon steels
von: Belykh, D.G., et al.
Veröffentlicht: (2023)

Increasing mechanical properties of low carbon steels with reducing grains size
von: A. S. Opalchuk, et al.
Veröffentlicht: (2013)

Effect of Hydrogen on the Localization of Plastic Deformation under Tensile of Low-Carbon Steel
von: S. A. Barannikova, et al.
Veröffentlicht: (2014)

Effect of high-temperature thermocycling on deposited metal of die heat-resistant steels type
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2012)

Study of structure and physico-chemical and mechanical properties in low-carbon steel after cyclic loading
von: L. A. Gorbachyov, et al.
Veröffentlicht: (2009)

Arc brazing of low-carbon steels
von: V. F. Khorunov, et al.
Veröffentlicht: (2013)

Effect of manganese on structure and wear resistance of deposited metal of the low-carbon steel type
von: V. L. Malinov
Veröffentlicht: (2011)

Study of the effect of microalloying with boron on the corrosion behavior of low-carbon structural steel in different structural states
von: V. G. Razdobreev
Veröffentlicht: (2019)

Formation of structural-phase states, defect substructure and properties of a surface of thermomechanically hardened low-carbon steel
von: V. E. Gromov, et al.
Veröffentlicht: (2016)

The influence of mechanical loading on the local remanence low-Carbon steels
von: Ju. V. Moiseev, et al.
Veröffentlicht: (2014)

Force parameters in the process of drawing in free rolls
von: V. A. Nikolaev, et al.
Veröffentlicht: (2009)

Increase of heat resistance and properties of die steel with control of austenitic transformation during operation
von: O. M. Sydorchuk, et al.
Veröffentlicht: (2019)

Shear transformation of austenite in steels considering stresses' effects
von: S. V. Bobyr, et al.
Veröffentlicht: (2022)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009)

Control of parameters of heated wire in process of drawing
von: V. A. Porev, et al.
Veröffentlicht: (2017)

Influence of thermomechanical treatments using equal-channel multi-angle pressing and low-temperature drawing on the superconducting properties of niobium–titanium alloys
von: V. A. Beloshenko, et al.
Veröffentlicht: (2014)

Regularities of formation of structure, texture and properties under the combined plastic deformation of the low-carbon and ultralow-carbon steels for cold press forming
von: Yu. S. Projdak, et al.
Veröffentlicht: (2019)

Regularities of formation of structure, texture and properties under the combined plastic deformation of the low-carbon and ultralow-carbon steels for cold press forming
von: Projdak, Yu.S., et al.
Veröffentlicht: (2019)

Laboratory research of effect feature electromagnetic influence of low specific power on casted and heat treated low-carbon steel mechanical properties
von: S. I. Semykin, et al.
Veröffentlicht: (2014)

Regularities and mechanisms of thermomechanical hardening of rolled low-carbon steel
von: V. E. Gromov, et al.
Veröffentlicht: (2011)

Fatigue of low-carbon and low-alloys steels under conditions of Fretting
von: G. V. Tsybanev, et al.
Veröffentlicht: (2009)

Structure and Properties of Complex Boron Coatings on Carbon Steel
von: S. M. Cherneha, et al.
Veröffentlicht: (2015)

Modeling the phase-structural state and controlling the properties of metal of Fe-Cr-Mn alloying system, deposited on low-carbon structural steel
von: Ja. A. Chejljakh, et al.
Veröffentlicht: (2018)

Specific Boundaries in Ferrite of Low-Carbon Steels
von: G. D. Sukhomlin
Veröffentlicht: (2013)

Structure and properties of sintered manganese steels with different carbon contents
von: H. A. Bahliuk, et al.
Veröffentlicht: (2010)

The influence of organic manures on corrosion-electrochemical characteristics of low-carbon steels
von: P. V. Popovych, et al.
Veröffentlicht: (2014)

Phase transformations in low-carbon steels, alloyed a manganese
von: M. F. Evsjukov, et al.
Veröffentlicht: (2012)

Tools for construction drawings of geological cross-sections
von: Yu. A. Tarnavskyi
Veröffentlicht: (2016)

Low carbon steel for hot metal deformation tools (review)
von: S. V. Bobyr, et al.
Veröffentlicht: (2019)

Structure of low-carbon steel after a warm twist extrusion
von: O. H. Pashynska
Veröffentlicht: (2013)

The effect of structure on the low-temperature electrical conductivity of carbon nanocomposite temperature sensors
von: V. V. Vajnberg, et al.
Veröffentlicht: (2019)

Simulation of the pressure die casting process on the casting "Screw die" production
von: A. R. Abdulov, et al.
Veröffentlicht: (2015)

Effects of Carbon in Steels on Wear of Railway Wheels and Rails
von: V. A. Loktionov-Remizovskij, et al.
Veröffentlicht: (2018)

Extreme pressure properties of lubricants under die casting aluminum alloys
von: A. M. Mikhaltsov, et al.
Veröffentlicht: (2011)