Effect of prior plastic deformation of steel 25 on its diffusion saturation with boron and carbon
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | Yu. Filonenko, Yu. Bereza, S. B. Piliaieva |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2015
|
| Назва видання: | Materials Science (Physicochemical mechanics of materials) |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000662967 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Influence of plastic prestrain on boron and carbon diffusion in iron based alloys
за авторством: Yu. Filonenko, та інші
Опубліковано: (2010)
за авторством: Yu. Filonenko, та інші
Опубліковано: (2010)
Boronizing of structural steels using saturating pastes
за авторством: M. A. Pohribnyi, та інші
Опубліковано: (2011)
за авторством: M. A. Pohribnyi, та інші
Опубліковано: (2011)
Regularities of thermo-diffusion saturation of titanium alloys from amorphous boron in nitrogen
за авторством: V. M. Fedirko, та інші
Опубліковано: (2011)
за авторством: V. M. Fedirko, та інші
Опубліковано: (2011)
Effect of Hydrogen on the Localization of Plastic Deformation under Tensile of Low-Carbon Steel
за авторством: S. A. Barannikova, та інші
Опубліковано: (2014)
за авторством: S. A. Barannikova, та інші
Опубліковано: (2014)
Microstructure evolution of the carbon steels during surface severe plastic deformation
за авторством: M. O. Vasylyev, та інші
Опубліковано: (2021)
за авторством: M. O. Vasylyev, та інші
Опубліковано: (2021)
Diffusion saturation of alloy VT6 by nitrogen, carbon, oxygen
за авторством: M. M. Bobina, та інші
Опубліковано: (2011)
за авторством: M. M. Bobina, та інші
Опубліковано: (2011)
Structure and Properties of Complex Boron Coatings on Carbon Steel
за авторством: S. M. Cherneha, та інші
Опубліковано: (2015)
за авторством: S. M. Cherneha, та інші
Опубліковано: (2015)
Structure and topography of titanium alloys surface after thermal-diffusion saturation from boron carbide in vacuum
за авторством: I. M. Pohreliuk, та інші
Опубліковано: (2010)
за авторством: I. M. Pohreliuk, та інші
Опубліковано: (2010)
Structure formation of protective coatings on steels depending on the mode of diffusion saturation
за авторством: M. V. Kindrachuk, та інші
Опубліковано: (2012)
за авторством: M. V. Kindrachuk, та інші
Опубліковано: (2012)
Regularities of formation of structure, texture and properties under the combined plastic deformation of the low-carbon and ultralow-carbon steels for cold press forming
за авторством: Yu. S. Projdak, та інші
Опубліковано: (2019)
за авторством: Yu. S. Projdak, та інші
Опубліковано: (2019)
Regularities of formation of structure, texture and properties under the combined plastic deformation of the low-carbon and ultralow-carbon steels for cold press forming
за авторством: Projdak, Yu.S., та інші
Опубліковано: (2019)
за авторством: Projdak, Yu.S., та інші
Опубліковано: (2019)
The influence of loading on the deformation of surface layer of steels with boron-chromium coating
за авторством: L. A. Arendar, та інші
Опубліковано: (2011)
за авторством: L. A. Arendar, та інші
Опубліковано: (2011)
Modification of the surface of spheres from VT1-0 titanium by combining cold plastic deformation and thermodiffusion saturation with nitrogen
за авторством: Yu. O. Tsekhanov, та інші
Опубліковано: (2017)
за авторством: Yu. O. Tsekhanov, та інші
Опубліковано: (2017)
The influence of preliminary plastic deformation of 12Kh18N12T steel on its mechanical characteristics
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2011)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2011)
Effect of severe plastic deformation on radiation hardening of T91 ferritic-martensitic steel
за авторством: Voyevodin, V.N., та інші
Опубліковано: (2021)
за авторством: Voyevodin, V.N., та інші
Опубліковано: (2021)
Diffusion heat-resistant coatings for stainless and carbon steels
за авторством: A. L. Borisova, та інші
Опубліковано: (2019)
за авторством: A. L. Borisova, та інші
Опубліковано: (2019)
Influence of microalloying with boron on the structure and properties of deposited metal of the type of tool steel 25Kh5FMS
за авторством: A. A. Babinets, та інші
Опубліковано: (2022)
за авторством: A. A. Babinets, та інші
Опубліковано: (2022)
Initiation of a plastic flow in boron carbide at nanoindentation
за авторством: S. N. Dub, та інші
Опубліковано: (2015)
за авторством: S. N. Dub, та інші
Опубліковано: (2015)
Physical and mechanical properties and structure of boron containing powder steels with high carbon contents
за авторством: S. H. Napara-Volhina, та інші
Опубліковано: (2009)
за авторством: S. H. Napara-Volhina, та інші
Опубліковано: (2009)
Oxygen diffusion saturation of hafnium with the different surface layer
за авторством: V. S. Trush, та інші
Опубліковано: (2023)
за авторством: V. S. Trush, та інші
Опубліковано: (2023)
Study of the effect of microalloying with boron on the corrosion behavior of low-carbon structural steel in different structural states
за авторством: V. G. Razdobreev
Опубліковано: (2019)
за авторством: V. G. Razdobreev
Опубліковано: (2019)
A study of the influence of the plasticizers on the process of formation of boron carbide
за авторством: V. S. Panov, та інші
Опубліковано: (2016)
за авторством: V. S. Panov, та інші
Опубліковано: (2016)
Localization of deformation in the process of large plastic deformations
за авторством: M. A. Latypova, та інші
Опубліковано: (2022)
за авторством: M. A. Latypova, та інші
Опубліковано: (2022)
Effect of hot plastic deformation and heat treatment on structure and mechanical properties of steels for railway wheels
за авторством: A. I. Babachenko, та інші
Опубліковано: (2012)
за авторством: A. I. Babachenko, та інші
Опубліковано: (2012)
One- and two-component diffusion saturation of titanium with interstitial elements
за авторством: Ya. S. Matychak, та інші
Опубліковано: (2013)
за авторством: Ya. S. Matychak, та інші
Опубліковано: (2013)
Theoretical shear strength and the onset of plasticity in nanodeformation of cubic boron nitride
за авторством: S. N. Dub, та інші
Опубліковано: (2017)
за авторством: S. N. Dub, та інші
Опубліковано: (2017)
Microhardness of compounds of rhenium with boron, carbon, and nitrogen
за авторством: A. L. Ivanovskij
Опубліковано: (2012)
за авторством: A. L. Ivanovskij
Опубліковано: (2012)
The influence of laser treatment on the strengthening of inclusion–steel matrix interphase under plastic deformation
за авторством: S. I. Hubenko
Опубліковано: (2017)
за авторством: S. I. Hubenko
Опубліковано: (2017)
Low carbon steel for hot metal deformation tools (review)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2019)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2019)
High pressure effects in severe plastic deformation
за авторством: Varyukhin, V.N., та інші
Опубліковано: (2004)
за авторством: Varyukhin, V.N., та інші
Опубліковано: (2004)
Carbon and carbon clusters in metal–boron–carbon ceramics fabricated by solid-phase synthesis
за авторством: I. F. Kazo, та інші
Опубліковано: (2011)
за авторством: I. F. Kazo, та інші
Опубліковано: (2011)
A new discrete model of solids plastic deformation
за авторством: Yu. Kozak
Опубліковано: (2019)
за авторством: Yu. Kozak
Опубліковано: (2019)
Substructure and orientation heterogeneity of polycrystalline aluminum and its changes during plastic deformation
за авторством: Badiyan, E.E., та інші
Опубліковано: (2016)
за авторством: Badiyan, E.E., та інші
Опубліковано: (2016)
Effect of diffusive hydrogen on resistance against delayed fracture of high-carbon steel welded joints
за авторством: A. A. Gajvoronskij
Опубліковано: (2013)
за авторством: A. A. Gajvoronskij
Опубліковано: (2013)
Increasing the wear resistance of the T15K6 hard alloy by boriding and complex saturation with boron and copper
за авторством: S. M. Cherneha, та інші
Опубліковано: (2016)
за авторством: S. M. Cherneha, та інші
Опубліковано: (2016)
Investigation of space distribution of surface acoustic waves velocity in plastically deformed steel by the laser method
за авторством: V. V. Koshovyi, та інші
Опубліковано: (2013)
за авторством: V. V. Koshovyi, та інші
Опубліковано: (2013)
Research of a vacuum diffusion boron silicification process for constructional materials
за авторством: V. I. Zmij, та інші
Опубліковано: (2013)
за авторством: V. I. Zmij, та інші
Опубліковано: (2013)
Macroscopic physics of plastic deformation of metals
за авторством: L. B. Zuev
Опубліковано: (2015)
за авторством: L. B. Zuev
Опубліковано: (2015)
Structural mechanisms of plastic deformation of ceramics
за авторством: G. S. Olejnik
Опубліковано: (2014)
за авторством: G. S. Olejnik
Опубліковано: (2014)
Macrolocalization of plastic deformation and staging of plastic flow in polycrystalline metals and alloys
за авторством: V. I. Danilov, та інші
Опубліковано: (2008)
за авторством: V. I. Danilov, та інші
Опубліковано: (2008)
Схожі ресурси
-
Influence of plastic prestrain on boron and carbon diffusion in iron based alloys
за авторством: Yu. Filonenko, та інші
Опубліковано: (2010) -
Boronizing of structural steels using saturating pastes
за авторством: M. A. Pohribnyi, та інші
Опубліковано: (2011) -
Regularities of thermo-diffusion saturation of titanium alloys from amorphous boron in nitrogen
за авторством: V. M. Fedirko, та інші
Опубліковано: (2011) -
Effect of Hydrogen on the Localization of Plastic Deformation under Tensile of Low-Carbon Steel
за авторством: S. A. Barannikova, та інші
Опубліковано: (2014) -
Microstructure evolution of the carbon steels during surface severe plastic deformation
за авторством: M. O. Vasylyev, та інші
Опубліковано: (2021)