Initiation of a plastic flow in boron carbide at nanoindentation
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | S. N. Dub, V. I. Kushch, O. N. Kajdash, V. P. Sereda, T. S. Panasjuk |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2015
|
| Назва видання: | Superhard Materials |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000694054 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
The elastic–plastic transition during nanoindentation of titanium nitride
за авторством: S. N. Dub, та інші
Опубліковано: (2018)
за авторством: S. N. Dub, та інші
Опубліковано: (2018)
The Assessment of elasto-plastic properties of materials from nanoindentation and computer modeling. 2. Experimental-and-theoretical procedure
за авторством: V. I. Kushch, та інші
Опубліковано: (2012)
за авторством: V. I. Kushch, та інші
Опубліковано: (2012)
The assessment of elasto-plastic properties of materials from nanoindentation and computer modeling. 1. State–of–the–art of problem (review of the literature)
за авторством: V. I. Kushch, та інші
Опубліковано: (2012)
за авторством: V. I. Kushch, та інші
Опубліковано: (2012)
Micro- and nanoindentation of pyrolytic carbide-chrome coatings
за авторством: S. A. Krokhmal, та інші
Опубліковано: (2011)
за авторством: S. A. Krokhmal, та інші
Опубліковано: (2011)
A study of the influence of the plasticizers on the process of formation of boron carbide
за авторством: V. S. Panov, та інші
Опубліковано: (2016)
за авторством: V. S. Panov, та інші
Опубліковано: (2016)
Production and properties of hot-pressed materials based on silicon carbide with additions of boron and titanium carbides
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2016)
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2016)
The structure and nanoindentation of C₆₀ films
за авторством: Pukha, V.E., та інші
Опубліковано: (2007)
за авторством: Pukha, V.E., та інші
Опубліковано: (2007)
Nanoindentation of pure and gas-saturated fullerite C60 crystals: elastic-to-plastic transition, hardness, elastic modulus
за авторством: S. N. Dub, та інші
Опубліковано: (2020)
за авторством: S. N. Dub, та інші
Опубліковано: (2020)
Comparative nanoindentation of single crystals of hard and superhard oxides
за авторством: S. N. Dub, та інші
Опубліковано: (2014)
за авторством: S. N. Dub, та інші
Опубліковано: (2014)
Study of mechanical properties of LaB6 single crystal by nanoindentation
за авторством: S. N. Dub, та інші
Опубліковано: (2013)
за авторством: S. N. Dub, та інші
Опубліковано: (2013)
Study of phase transformations in silicon by scanning tunneling spectroscopy and nanoindentation
за авторством: O. G. Lysenko, та інші
Опубліковано: (2013)
за авторством: O. G. Lysenko, та інші
Опубліковано: (2013)
Low-temperature synthesis of boron carbide ceramics
за авторством: Ye. V. Solodkyi, та інші
Опубліковано: (2018)
за авторством: Ye. V. Solodkyi, та інші
Опубліковано: (2018)
Theoretical shear strength and the onset of plasticity in nanodeformation of cubic boron nitride
за авторством: S. N. Dub, та інші
Опубліковано: (2017)
за авторством: S. N. Dub, та інші
Опубліковано: (2017)
Influence of boron doping on the photosensitivity of cubic silicon carbide
за авторством: V. N. Rodionov, та інші
Опубліковано: (2019)
за авторством: V. N. Rodionov, та інші
Опубліковано: (2019)
Influence of boron doping on the photosensitivity of cubic silicon carbide
за авторством: Rodionov, V.N., та інші
Опубліковано: (2019)
за авторством: Rodionov, V.N., та інші
Опубліковано: (2019)
Location of Al and Si atoms in substituted boron carbide
за авторством: V. V. Garbuz, та інші
Опубліковано: (2023)
за авторством: V. V. Garbuz, та інші
Опубліковано: (2023)
Deposition of boron carbide coatings by gas-phase method
за авторством: Yu. Zhuravlov, та інші
Опубліковано: (2019)
за авторством: Yu. Zhuravlov, та інші
Опубліковано: (2019)
Boron, aluminum, nitrogen, oxygen impurities in silicon carbide
за авторством: Vlaskina, S.I., та інші
Опубліковано: (2007)
за авторством: Vlaskina, S.I., та інші
Опубліковано: (2007)
Elastic properties and plasticity of the polycrystals and cutting composite materials on a base of cubic boron nitride
за авторством: O. I. Zaporozhets, та інші
Опубліковано: (2019)
за авторством: O. I. Zaporozhets, та інші
Опубліковано: (2019)
On melting of B4C boron carbide under pressure
за авторством: V. A. Mukhanov, та інші
Опубліковано: (2012)
за авторством: V. A. Mukhanov, та інші
Опубліковано: (2012)
Effect of sintering temperature and applied pressure on the properties of boron carbide- silicon carbide composites
за авторством: Ya. Z. Aygьzer, та інші
Опубліковано: (2021)
за авторством: Ya. Z. Aygьzer, та інші
Опубліковано: (2021)
Boron impurity effect on the structural, elastic, and electronic properties of titanium carbide
за авторством: I. V. Plyushchay, та інші
Опубліковано: (2020)
за авторством: I. V. Plyushchay, та інші
Опубліковано: (2020)
Boron impurity effect on the structural, elastic, and electronic properties of titanium carbide
за авторством: I. V. Pliushchai, та інші
Опубліковано: (2020)
за авторством: I. V. Pliushchai, та інші
Опубліковано: (2020)
Scintillation neutron detector on the basis of boron-containing plastics
за авторством: Ryzhikov, V.D., та інші
Опубліковано: (2004)
за авторством: Ryzhikov, V.D., та інші
Опубліковано: (2004)
Using PIGE for analysis of boron carbide of received by CVD method
за авторством: Levenets, V., та інші
Опубліковано: (2008)
за авторством: Levenets, V., та інші
Опубліковано: (2008)
Nanoscale Films: Structural Features and Nanoindentation Techniques
за авторством: D. V. Havryliuk, та інші
Опубліковано: (2022)
за авторством: D. V. Havryliuk, та інші
Опубліковано: (2022)
Reinforcement of material based on the cubic boron nitride by the help of silicon carbide whiskers
за авторством: Yu. Yu. Rumiantseva, та інші
Опубліковано: (2018)
за авторством: Yu. Yu. Rumiantseva, та інші
Опубліковано: (2018)
Gas-phase deposition of cavitation-resistant coatings based on boron carbide
за авторством: Yu. Zhuravlov, та інші
Опубліковано: (2018)
за авторством: Yu. Zhuravlov, та інші
Опубліковано: (2018)
Changing the performance of diamond finishing of ceramic balls of boron carbide and silicon nitride
за авторством: S. V. Sokhan, та інші
Опубліковано: (2021)
за авторством: S. V. Sokhan, та інші
Опубліковано: (2021)
The influence of the processing mode on the parameters of diamond finishing of ceramic balls made of boron carbide
за авторством: S. V. Sokhan, та інші
Опубліковано: (2020)
за авторством: S. V. Sokhan, та інші
Опубліковано: (2020)
Features of the structure and properties of metal layers deposited with pre-application of titanium and boron carbides
за авторством: V. V. Peremitko, та інші
Опубліковано: (2022)
за авторством: V. V. Peremitko, та інші
Опубліковано: (2022)
Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2021)
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2021)
Investigation of diamond-like films by the methods of raman light scattering and nanoindentation
за авторством: A. N. Kirichenko, та інші
Опубліковано: (2011)
за авторством: A. N. Kirichenko, та інші
Опубліковано: (2011)
Influence of plastic prestrain on boron and carbon diffusion in iron based alloys
за авторством: Yu. Filonenko, та інші
Опубліковано: (2010)
за авторством: Yu. Filonenko, та інші
Опубліковано: (2010)
Macrolocalization of plastic deformation and staging of plastic flow in polycrystalline metals and alloys
за авторством: V. I. Danilov, та інші
Опубліковано: (2008)
за авторством: V. I. Danilov, та інші
Опубліковано: (2008)
Boron Carbides of Alkali and Alkali-Earth Metals as Possible Hydrogen Storages. Hydrogen Solubility
за авторством: Z. A. Matysina, та інші
Опубліковано: (2013)
за авторством: Z. A. Matysina, та інші
Опубліковано: (2013)
Application of nanoindentation for investigation of radiation damage in SS316 stainless steel
за авторством: Tolmachova, G.N., та інші
Опубліковано: (2015)
за авторством: Tolmachova, G.N., та інші
Опубліковано: (2015)
Effect of dispersity of powder, pressure and sintering temperatures for microstructure and physico-mechanical properties of boron carbide ceramics
за авторством: V. S. Urbanovich, та інші
Опубліковано: (2018)
за авторством: V. S. Urbanovich, та інші
Опубліковано: (2018)
Modeling of the temperature field in a high-pressure apparatus during sintering of large-sized products based on boron carbide
за авторством: V. A. Dutka, та інші
Опубліковано: (2020)
за авторством: V. A. Dutka, та інші
Опубліковано: (2020)
Modeling of the thermal state of a high pressure apparatus cell during the sintering of large-sized carbide boron products
за авторством: V. A. Dutka, та інші
Опубліковано: (2019)
за авторством: V. A. Dutka, та інші
Опубліковано: (2019)
Схожі ресурси
-
The elastic–plastic transition during nanoindentation of titanium nitride
за авторством: S. N. Dub, та інші
Опубліковано: (2018) -
The Assessment of elasto-plastic properties of materials from nanoindentation and computer modeling. 2. Experimental-and-theoretical procedure
за авторством: V. I. Kushch, та інші
Опубліковано: (2012) -
The assessment of elasto-plastic properties of materials from nanoindentation and computer modeling. 1. State–of–the–art of problem (review of the literature)
за авторством: V. I. Kushch, та інші
Опубліковано: (2012) -
Micro- and nanoindentation of pyrolytic carbide-chrome coatings
за авторством: S. A. Krokhmal, та інші
Опубліковано: (2011) -
A study of the influence of the plasticizers on the process of formation of boron carbide
за авторством: V. S. Panov, та інші
Опубліковано: (2016)