Assessment of edge damageability of hard alloy tools under local loading

Saved in:

Bibliographic Details
Date:	2015
Main Authors:	V. V. Khvorostjanyj, A. V. Panasenko
Format:	Article
Language:	English
Published:	2015
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000694061
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Assessment of hardness and local damage of ceramics and glass by the method of scraping up to chipping out
by: V. V. Khvorostjanyj, et al.
Published: (2019)

Fracture resistance and damageability of linear-elastic ceramics under the conditions of edge local loading: a statistical analysis
by: V. V. Khvorostianyi, et al.
Published: (2020)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
by: Zhao, T., et al.
Published: (2017)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
by: T. Zhao, et al.
Published: (2017)

The fundamentals of synthesis of modified layers on cutting-tool hard alloys
by: S. S. Samotugin, et al.
Published: (2017)

Peculiarities of the edge crack faces contact under moving Hertzian loading
by: O. P. Datsyshyn, et al.
Published: (2013)

Geoinformation tool for remote assessment of shelterbelts damaged by military actions
by: Andreiev, Artem, et al.
Published: (2025)

Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
by: N. G. Shulzhenko, et al.
Published: (2015)

Quantitative assessment of the level of alloy AMg6 structure degradation under cyclic loading
by: Ye. Matokhniuk, et al.
Published: (2011)

Calculated Assessment of Crack Development Under Cyclic Loading of the Plate Using the Parameters of Dispersed Damage of the Material
by: Гонтаровський, П. П., et al.
Published: (2024)

Calculated Assessment of Crack Development Under Cyclic Loading of the Plate Using the Parameters of Dispersed Damage of the Material
by: Гонтаровський, П. П., et al.
Published: (2024)

Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
by: Шульженко, Н. Г., et al.
Published: (2015)

Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
by: Шульженко, Н. Г., et al.
Published: (2015)

Contact fatigue in low-cycle loading of Wc-Co hard alloys for metal working
by: Fal'kovskii, V.A., et al.
Published: (1985)

Peculiarities of ecosystem assessment of damages of loads and other emergency pollution (for the water resources application)
by: V. Kolmakova
Published: (2017)

Plasma hardening of cutting edges of soil-cultivating tool
by: S. S. Samotugin, et al.
Published: (2009)

Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
by: Bomas, H., et al.
Published: (2008)

Dependence of sapphire hardness on loading type and orientation
by: Sinani, A.B., et al.
Published: (2009)

Macroscopic erosion of divertor materials under plasma heat loads typical for ITER hard disruptions
by: Safronov, V., et al.
Published: (2002)

Damaging of pure tungsten with different microstructure under sequential QSPA and LHD plasma loads
by: Herashchenko, S.S., et al.
Published: (2020)

Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
by: Zhang, J., et al.
Published: (2018)

Cutting-edge industrial technology of mining tool manufacturing
by: Savchenko, Iu., et al.
Published: (2016)

Determining shock hardness and micro hardness of nonferrous metals and their alloys
by: O. O. Kotrechko
Published: (2016)

On the Stress-Strain State of Layered Composite Plates under Local Loadings
by: A. V. Marchuk, et al.
Published: (2018)

Equipment on base of lathe tools for mill roll hard-facing
by: V. I. Titarenko, et al.
Published: (2013)

High-temperature creep of hard-alloy samples that are sintering under the conditions of uniaxial compression
by: V. P. Bondarenko, et al.
Published: (2017)

Process approach as a powerful tool to assess effectiveness of the bank&#039;s resource potential
by: H. O. Panasenko
Published: (2014)

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
by: Kryzhanivskyy, V., et al.
Published: (2017)

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
by: V. Kryzhanivskyy, et al.
Published: (2017)

Diagnosis of damage to caterpillar tracks under mechanical loading based on the results of measurements of the coercive force
by: O. P. Hopkalo, et al.
Published: (2021)

Nitrogen titanizing of hard alloy VK8
by: M. V. Karpets, et al.
Published: (2009)

Hardening of leading edges of turbine blades by electrospark alloying
by: Kalinina, N.E., et al.
Published: (2019)

Mathematical Modeling of Cylindrical Adapter Dynamics under Local Pulse Loading
by: P. Z. Luhovyi, et al.
Published: (2016)

Features of dental polymer composites fracture under the action of local loading
by: V. R. Skalskyi, et al.
Published: (2021)

Damage and Fracture of VT22 Titanium Alloy in Static Tension after the Application of Additional Pulse Loading
by: Марущак, П.О., et al.
Published: (2017)

Evolution of discrete phenomena of inelasticity in aluminum alloy under cyclic loading
by: Pisarenko, G.G., et al.
Published: (2009)

Assessment of the Environmentally Caused Investment Damage
by: I. M. Kobushko, et al.
Published: (2014)

Electrodeposition of very hard coatings of cobalt–molybdenum alloy
by: V. V. Shtefan, et al.
Published: (2017)

Influence of structure of hybrid super hard material on the performance of drilling tool
by: R. K. Bogdanov, et al.
Published: (2016)

Evolution of dislocation line shape in multicomponent alloys under loading
by: M. I. Luhovyi, et al.
Published: (2022)