Buchumschlag

Development of technology of manufacture of drill bits with protective coating of working bodies

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
1. Verfasser:	B. V. Stefaniv
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2021
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001273668
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Peculiarities of repair of worn areas of drill bit bodies
von: B. V. Stefaniv
Veröffentlicht: (2020)

Peculiarities of wear and development of repair technology of drill bits
von: B. V. Stefaniv
Veröffentlicht: (2024)

Manufacture of drilling bits for dissipated methane production in mines
von: V. F. Khorunov, et al.
Veröffentlicht: (2010)

Analysis of materials and modern technologies for PDC drill bit manufacturing
von: Ya. Ropyak, et al.
Veröffentlicht: (2020)

Peculiarities of induction brazing of diamond-hard-alloy cutters with body wing of composite drilling bit
von: B. V. Stefaniv
Veröffentlicht: (2013)

Peculiarities of restoration of water course of steel drilling bit
von: B. V. Stefaniv, et al.
Veröffentlicht: (2014)

Features of restoration of operating organs of matrix drill bits
von: B. V. Stefaniv, et al.
Veröffentlicht: (2015)

Technological peculiarities of electron beam welding of drilling bits
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2009)

The drill bits: history and modern experience
von: Kozhevnykov, A., et al.
Veröffentlicht: (2019)

The drill bits: history and modern experience
von: A. Kozhevnykov, et al.
Veröffentlicht: (2019)

Electron beam welding of bodies of drill bits with zirconium modification of the weld metal
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2011)

Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Research of technological parameters of blasthole drilling with cutter drilling bits which have pins of different regidity
von: V. G. Synkov, et al.
Veröffentlicht: (2016)

Influence of diamond defects on workability drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2017)

Decision-Making in Choosing Drill Bits and Drilling Operational Parameters Based on Initial Data
von: G. M. Efendiev, et al.
Veröffentlicht: (2016)

Character of wear of synthetic diamonds differentstrength in impregnated drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2018)

Mechanics of effective destruction of rocks by chain-drilling bits rollingcutter
von: O. M. Davydenko, et al.
Veröffentlicht: (2019)

Implementation of the rock thermal cyclic weakening in the diamond drill bits with an elastic console
von: V. F. Gankevich, et al.
Veröffentlicht: (2018)

Assessment of wear resistance of a core drilling bit with hybridite reinforcing inserts
von: M. V. Suprun, et al.
Veröffentlicht: (2015)

Influence of durability of synthetic diamonds on efficiency of destruction of mountain rock drill bits
von: A. M. Isonkin
Veröffentlicht: (2016)

Development of the regulation on the regiment-technological factors of the production of drilling works
von: R. A. Gasanov, et al.
Veröffentlicht: (2017)

Efficiency of the use of diamond drilling bits with a different intensity of the destruction of the mountain rocks
von: A. M. Isonkin
Veröffentlicht: (2017)

Investigation of wear-resistant protective coatings under conditions of hydro-abrasive wear
von: B. V. Stefaniv
Veröffentlicht: (2016)

Comparative estimation of the performance of drilling bits with diamond-containing matrix and inserts from diamond-containing composites
von: O. P. Vynohradova, et al.
Veröffentlicht: (2022)

Structure and properties of WC–Co composites sintered by vacuum hot pressing with different CrB2 content for drill bits
von: B. T. Ratov, et al.
Veröffentlicht: (2021)

Technology and equipment for manufacture of high-pressure cylinder bodies of sheet rolled metal
von: M. M. Savitskij, et al.
Veröffentlicht: (2010)

Unit Bits and one Weighted Bit Sum Codes with Arbitrary Counting Modules
von: D. V. Efanov, et al.
Veröffentlicht: (2019)

Evaluation of diamond-coated tools in drilling high-strength CFRP composites
von: J. Xu, et al.
Veröffentlicht: (2022)

Contact fracture of rolling bodies of three-cone rock bits opened bearings in water environments
von: Ye. I. Kryzhanivskyi, et al.
Veröffentlicht: (2010)

Electrochemical properties of the PEO-coatings on the AZ31 Mg-alloy manufactured by different technologies
von: H. V. Pokhmurska, et al.
Veröffentlicht: (2015)

Review of the use of advanced technologies in drilling and blasting
von: N. A. Slyambekov
Veröffentlicht: (2021)

Anniversaries of Innovative Drilling Technologies. Reference Review
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2015)

Diagnostics of defectiveness of structural elements, manufactured of metal and composite materials with protective coating, applying method of electron shearography
von: L. M. Lobanov, et al.
Veröffentlicht: (2017)

Development of technology of brazing of diamond-hardalloy cutters
von: B. F. Stefaniv
Veröffentlicht: (2013)

Development of single walled diamond bits with shorter sectors
von: A. A. Karakozov, et al.
Veröffentlicht: (2016)

Developing and investigating coating for protection from fretting-corrosion
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2010)

Prospects of the type roller cone bit alternative design
von: B. V. Fedorov, et al.
Veröffentlicht: (2016)

Model of deep refining wells of pdc wells with bit
von: B. V. Fedorov, et al.
Veröffentlicht: (2017)

Radiation Technology for the Manufacture of Medical Products with Nanosilver: from Development to Commercialization
von: V. B. Neimash
Veröffentlicht: (2022)

Periphyton development on protective coating modified by cation biocide
von: S. P. Rogalskij, et al.
Veröffentlicht: (2019)