Cover Image

Analysis of the electrical characteristics of the converter when melting steel bath

Saved in:

Bibliographic Details
Date:	2015
Main Authors:	S. I. Semykin, V. F. Poljakov, T. S. Golub, Ja. A. Poljakova
Format:	Article
Language:	English
Published:	2015
Series:	Fundamental and applied problems of ferrous metallurgy
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000839212
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Analysis of the status and application prospects technology liquid-phase reduction manganese from oxide materials at melting converter
by: Ja. A. Poljakova, et al.
Published: (2014)

Development and implementation of resource-saving technologies converter melting using electricity low power
by: S. I. Semykin, et al.
Published: (2014)

Analysis of information on decarburization process bath converter
by: K. V. Egorov, et al.
Published: (2014)

Analysis of the scientific-technological solutions to reduce gas content in the iron melts with converter steel making
by: V. F. Poljakov, et al.
Published: (2012)

Experimental studies of the of electrical effects influence on iron melt when his external refining with granulated magnesium
by: S. I. Semykin, et al.
Published: (2013)

High temperature study of features of blowing a metal bath in LD converter through the annular coaxial nozzle
by: S. I. Semykin, et al.
Published: (2019)

Laboratory research process ladle desulphurization powder lime and granulated magnesium when applied to melt the low-voltage electrical potential
by: S. I. Semykin, et al.
Published: (2014)

Improving the efficiency of converter bath top-blowing
by: A. G. Chernjatevich, et al.
Published: (2015)

Behavior pattern of temperature condition of converter bath
by: V. S. Bogushevskij, et al.
Published: (2011)

Direct observation of high-temperature areas of metal melt at oxygen converter blowing with low voltage application
by: S. I. Semykin, et al.
Published: (2021)

Directions of scientific and technological research on reducing of saturation by gases of converter steel
by: V. F. Poljakov, et al.
Published: (2013)

Determination of coefficient of correlation between melting parameters and temperature of steel for BOF melting
by: A. A. Semikina, et al.
Published: (2013)

The energy efficiency of the cooling bath the glass melting furnace
by: Ju. A. Selikhov, et al.
Published: (2017)

Converter bath mixing peculiarities during upper and combined blowing
by: A. G. Chernjatevich, et al.
Published: (2015)

The features of manganese liquid-phase reduction in the converter process with low-voltage electric potential
by: T. S. Golub, et al.
Published: (2017)

The features of manganese liquid-phase reduction in the converter process with low-voltage electric potential
by: S. I. Semykin, et al.
Published: (2017)

Trends of the technology development of the converter bath combined blowing by oxygen and inert gas
by: A. G. Chernjatevich
Published: (2014)

Physicochemical processes in the oxygen converter cavity during bath purging with afterburning of exhaust gases
by: A. G. Chernjatevich, et al.
Published: (2019)

Development of energy efficient technology of combined blowing of converter bath by oxygen and neutral gases
by: A. G. Chernjatevich, et al.
Published: (2018)

Behavior of oxygen and nitrogen in the melt during oxygen-converter heat
by: S. I. Semykin, et al.
Published: (2017)

Research in a physical model with the top blowing of a gas-dynamic head and jet parameters at blowing of a liquid bath through an annular coaxial slit nozzle
by: S. I. Semykin, et al.
Published: (2018)

Thermodynamic and high-temperature simulation of converter bath combined blowing by a three-level oxygen lance
by: A. G. Chernjatevich, et al.
Published: (2017)

Mathematical modeling of electrical resistance slag bath of electroslag crucible furnace
by: O. S. Ivanova, et al.
Published: (2017)

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
by: S. I. Semykin, et al.
Published: (2020)

Blast furnace melting study by measuring of electric potentials that arising in volume of furnace
by: I. G. Muraveva, et al.
Published: (2013)

Evaluation of influence of multilevel oxygen lance constructions on blowing efficiency of converter bath with post-combustion of waste gases
by: L. S. Molchanov, et al.
Published: (2018)

Investigation on physical model of converter process of features of electric potential influence on nature of liquid spraying at top blowing out
by: S. I. Semykin, et al.
Published: (2015)

Study and evaluation of sulfur exposure in the steel melt during the converter heat with highly desulfurized pig iron
by: B. V. Dvoskin, et al.
Published: (2017)

Analysis of energy processes in pulse converters of AC electric power
by: A. F. Kadatskij, et al.
Published: (2015)

Dynamics of oscillations of the &quot;liquid bath - lance&quot; system during injection processing of the melt in the ledle
by: V. I. Yelisieiev, et al.
Published: (2020)

Effect of Liquid Salt Bath Nitrocarburizing on Mechanical Properties of Low-Alloy Sintered Steels
by: Serrai, S., et al.
Published: (2018)

Study of the influence of technology BOF melt on quality steel
by: V. F. Poljakov, et al.
Published: (2014)

Features of mass transfer in bath of dc ladle furnace unit with capacity 140 tons
by: V. P. Piptjuk, et al.
Published: (2012)

Working out and approbation of resource-saving technology of metal refinement at melting in the converter with low-voltage influences
by: T. S. Kijashko, et al.
Published: (2011)

Laboratory research of effect feature electromagnetic influence of low specific power on casted and heat treated low-carbon steel mechanical properties
by: S. I. Semykin, et al.
Published: (2014)

Complex Improvement of Power Quality and Ensure Electrical Safety in Local Power Supply Systems When Using Hybrid Filter Compensating Converters
by: A. F. Zharkin, et al.
Published: (2018)

Research on the physical model of features of the behavior of a two-phase bath at top blowing through a tip with folded nozzles
by: S. I. Semykin, et al.
Published: (2020)

The analysis of energy and magnetic processes in inductors switched-mode electrical energy converters
by: A. F. Kadatskij, et al.
Published: (2016)

Physical modeling of melt flow when a roller casting
by: A. V. Nogovitsin, et al.
Published: (2015)

High-temperature study of the features of metal blowing in the converter through the top oxygen lance with an annular slit nozzle
by: S. I. Semykin, et al.
Published: (2018)