Cover Image

Application prospects for quasicrystalline Al–Cu–Fe–Si–B alloys as fillers of macroheterogeneous composites

Saved in:

Bibliographic Details
Date:	2015
Main Authors:	E. V. Sukhovaja, V. L. Pljuta, E. V. Ustinova
Format:	Article
Language:	English
Published:	2015
Series:	Fundamental and applied problems of ferrous metallurgy
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000839223
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Quasicrystalline Al–Ni–Fe fillers for macroheterogeneous composites
by: E. V. Sukhovaja, et al.
Published: (2014)

Interfaces structure formation of the composites reinforced with Al—Co—Cu quasicrystalline filler
by: E. V. Sukhovaja, et al.
Published: (2014)

Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
by: Ryabtsev, S.I., et al.
Published: (2020)

Corrosion resistance of Al–Cu–Fe–(Si, B) alloys in mineralized solutions of acidic and saline solutions
by: O. V. Sukhova, et al.
Published: (2019)

The influence of solidification rate on the formation quasicrystalline phase in of Ti – Cr – Al – Si alloys
by: M. O. Krapivka, et al.
Published: (2017)

Corrosion behaviour of quasicrystal Al – Cu – Fe and Al – Ni – Fe alloys in acidic solutions
by: O. V. Sukhova, et al.
Published: (2018)

Quasi-crystalline alloys-fillers for composite layers produced by method of furnace surfacing
by: E. V. Sukhovaja
Published: (2014)

The composite materials with a quasi-crystalline filler structure formation features
by: E. V. Sukhovaja, et al.
Published: (2012)

Coatings of composite quasicrystalline aluminum-based alloy
by: D. V. Hushchyk, et al.
Published: (2018)

Friction stir welding of composite, granulated and quasicrystalline aluminium alloys
by: A. G. Pokljatskij, et al.
Published: (2011)

Structure and properties of Fe—P—B hard alloys and composites on their base
by: E. V. Sukhovaja, et al.
Published: (2015)

Корозійна поведінка квазікристалічних сплавів Al – Cu – Fe та Al – Ni – Fe у розчинах кислот
by: Sukhova, O. V., et al.
Published: (2018)

Effect of temperature on structure and mechanical properties of composite quasicrystalline Al94Fe3Cr3 alloy consolidated under high pressure
by: O. I. Yurkova, et al.
Published: (2018)

Structure and properties of Al−Si−Cu alloys after crystallization in magnetic field
by: M. M. Voron, et al.
Published: (2018)

Термически обусловленное охрупчивание аморфных сплавов Fe-Si-B-Cu-Nb
by: Маслов, В.В., et al.
Published: (2010)

Influence of Molybdenum on Structure of Alloy AlSi9Cu3
by: M. M. Voron, et al.
Published: (2020)

Resonance properties and magnetic anisotropy of nanocrystalline Fe73Cu1Nb3Si16B7 alloy
by: A. M. Pogorily, et al.
Published: (2019)

Resonance properties and magnetic anisotropy of nanocrystalline Fe73Cu1Nb3Si16B7 alloy
by: A. M. Pohorilyi, et al.
Published: (2019)

The influence of hydrogen peroxide on composition and porosity of oxide ceramic coatings on Al–Si–Cu ta Al–Cu–Mg alloys
by: V. M. Posuvailo, et al.
Published: (2021)

Вплив Si та B на структуру та корозійні властивості квазикристалічних стопів Al–Cu–Fe у розчинах солей
by: Сухова, О.В., et al.
Published: (2018)

The features of structure formation at synthesis of high entropy alloys of Al – Cr – Fe – Ni – Cu, Al – Ti – Cr – Fe – Ni – Cu and Ti – Cr – Fe – Ni – Cu systems by means of powder metallurgy
by: H. A. Bahliuk, et al.
Published: (2015)

Vanadium Edition Influence on the Structural and Phase Parameters of Al–Si–Cu Alloys
by: M. M. Voron, et al.
Published: (2019)

Prospects to use amorphous Fe–Ni–Si–B ribbons in contactor cores
by: N. M. Rafiyev, et al.
Published: (2023)

Prospects to use amorphous Fe–Ni–Si–B ribbons in contactor cores
by: N. M. Rafiyev, et al.
Published: (2023)

Heat protective properties of thermal coatings, containing quasi-crystalline alloy Al–Cu–Fe
by: A. L. Borisova, et al.
Published: (2012)

Fluxless brazing of aluminium alloys by brazing filler metal of Al-Ge system
by: O. M. Sabadash, et al.
Published: (2023)

Formation of Structure and Phase Composition of Nanocrystalline CuNiAlFeCr Alloy by the Mechanical Alloying Method
by: A. I. Jurkova, et al.
Published: (2014)

Structure and corrosion properties of quasi-crystal cast alloys and film Al–Cu–Fe coatings
by: S. I. Riabtsev, et al.
Published: (2020)

Electronic Structure of Amorphous Metal Alloy Fe77Si8B15
by: V. L. Karbovskij, et al.
Published: (2014)

Комплексне модифікування сплаву AlSi9Cu3(Fe) кобальтом, ванадієм та молібденом
by: Voron, M. M., et al.
Published: (2023)

Processes of contact interaction in composite materials with microcrystalline filler
by: E. V. Sukhovaja, et al.
Published: (2011)

Quasicrystal structure in Al – Cu – Fe PVD coatings
by: N. V. Zaitseva, et al.
Published: (2013)

Structure and phase composition of high-entropy AlCuNiFeTi alloy resulted from mechanical alloying
by: O. I. Yurkova, et al.
Published: (2014)

The effect of tin fillers on structure and technological properties of brazing alloys of Ag-Cu-Zn system
by: V. F. Khorunov, et al.
Published: (2010)

The influence of irradiation by hydrogen plasma on the structure and phase compozition Ti-Zr-Ni alloys containing quasicrystalline phase
by: Bazdyreva, S.V., et al.
Published: (2012)

Ultrasonic study of as-cast heterogeneous high-entropy alloy AlCuCrCoNiFe
by: V. M. Nadutov, et al.
Published: (2016)

Reception regular macroheterogeneous structure by methods differentiate treatments with use of sources of the concentrated energy
by: L. S. Malinov
Published: (2009)

Hydrogen interaction with Ti–Al–V–Fe, Al–V–Fe and Ti–Al–Mo–Fe master alloy powders
by: O. M. Ivasyshyn, et al.
Published: (2018)

Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
by: M. I. Pashechko
Published: (2010)

Influence of г-irradiation on initial magnetic permeability of amorphous and nanocrystalline Fe−Si−B-based alloys
by: Yu. Povarchuk, et al.
Published: (2012)