Research of the conditions and mechanisms of strength formation in compacts during briquetting of fine-fraction materials
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | S. V. Vashchenko, B. N. Majmur, V. I. Petrenko, K. V. Bajul, Ju. Khudjakov, N. A. Solodkaja, E. B. Prokudina |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2015
|
| Назва видання: | Fundamental and applied problems of ferrous metallurgy |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000839231 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Investigation of the influence of properties of small fraction of charge materials on their seal roller briquetting presses
за авторством: B. N. Majmur, та інші
Опубліковано: (2014)
за авторством: B. N. Majmur, та інші
Опубліковано: (2014)
Development in ICHM development of technologies and equipment for briquetting small fraction of raw materials and industrial waste
за авторством: B. N. Majmur
Опубліковано: (2014)
за авторством: B. N. Majmur
Опубліковано: (2014)
Method of estimation of the roll press bandage wear effect on technologic and power parameters of briquetting
за авторством: K. V. Bajul, та інші
Опубліковано: (2013)
за авторством: K. V. Bajul, та інші
Опубліковано: (2013)
Forming recommendations for the development of a high-productivity rolling press advanced construction
за авторством: K. V. Bajul, та інші
Опубліковано: (2018)
за авторством: K. V. Bajul, та інші
Опубліковано: (2018)
The development of scientific and methodological basis for the evaluation how the parameters of the forming element influence the elastic aftereffect in briquettes
за авторством: K. V. Bajul, та інші
Опубліковано: (2017)
за авторством: K. V. Bajul, та інші
Опубліковано: (2017)
Forming consumable electrodes from briquetted sponge titanium in electron beam unit
за авторством: S. V. Akhonin, та інші
Опубліковано: (2019)
за авторством: S. V. Akhonin, та інші
Опубліковано: (2019)
Multiple-wire submerged arc welding of high-strength fine-grained steels
за авторством: S. Gook, та інші
Опубліковано: (2022)
за авторством: S. Gook, та інші
Опубліковано: (2022)
Effect of welding heating on fatigue strength of hollow structures of highstrength fine-grain steels
за авторством: K. Bruns, та інші
Опубліковано: (2013)
за авторством: K. Bruns, та інші
Опубліковано: (2013)
On the compactness and the uniform continuity of a resolvent family for a fractional differential equation
за авторством: A. V. Antonjuk, та інші
Опубліковано: (2014)
за авторством: A. V. Antonjuk, та інші
Опубліковано: (2014)
Investigation of the effect of water content and degree of compaction on the shear strength of clay soil material
за авторством: Zhang Huzhu, та інші
Опубліковано: (2017)
за авторством: Zhang Huzhu, та інші
Опубліковано: (2017)
The synthesis of the fine particles during plasma spray pyrolysis process
за авторством: Valinčius, V., та інші
Опубліковано: (2008)
за авторством: Valinčius, V., та інші
Опубліковано: (2008)
Features of mechanical strength theories of composition materials
за авторством: T. A. Palamarchuk, та інші
Опубліковано: (2014)
за авторством: T. A. Palamarchuk, та інші
Опубліковано: (2014)
Molibdenium disilicide based composites with improved strength (mechanical properties)
за авторством: V. N. Paderno, та інші
Опубліковано: (2011)
за авторством: V. N. Paderno, та інші
Опубліковано: (2011)
Electrothermal compacting of metallic materials
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2011)
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2011)
Electroosmotic dewatering of fine clay materials
за авторством: L. L. Lysenko, та інші
Опубліковано: (2015)
за авторством: L. L. Lysenko, та інші
Опубліковано: (2015)
Modeling of the compaction of powder filter elements during radial isostatic pressing
за авторством: Yu. Povstianoi, та інші
Опубліковано: (2020)
за авторством: Yu. Povstianoi, та інші
Опубліковано: (2020)
Fracture Strength of Glass Based on Concept of Fracture Mechanics
за авторством: B. H. Demchyna, та інші
Опубліковано: (2022)
за авторством: B. H. Demchyna, та інші
Опубліковано: (2022)
Normalization and averaging on compact lie groups in nonlinear mechanics
за авторством: Lopatin, A.K.
Опубліковано: (1997)
за авторством: Lopatin, A.K.
Опубліковано: (1997)
Normalization and averaging on compact lie groups in nonlinear mechanics
за авторством: Lopatin, A. K., та інші
Опубліковано: (1997)
за авторством: Lopatin, A. K., та інші
Опубліковано: (1997)
The plastic deformation mechanisms of ultra fine-grained copper at temperatures 4.2–300 K
за авторством: N. V. Isaev, та інші
Опубліковано: (2016)
за авторством: N. V. Isaev, та інші
Опубліковано: (2016)
Compact Variation, Compact Subdifferetiability and Indefinite Bochner Integral
за авторством: Orlov, I.V., та інші
Опубліковано: (2009)
за авторством: Orlov, I.V., та інші
Опубліковано: (2009)
The Ukrainian-Greek Symposium on Fracture Mechanics of Materials and Strength of Structures
за авторством: I. M. Dmytrakh, та інші
Опубліковано: (2011)
за авторством: I. M. Dmytrakh, та інші
Опубліковано: (2011)
Acousticemission diagnostics of sections of shaft lining during their strength testing
за авторством: V. A. Kulish, та інші
Опубліковано: (2014)
за авторством: V. A. Kulish, та інші
Опубліковано: (2014)
The mechanical strength advance of radiation-hard plastic scintillators with diffusion enhancers
за авторством: Velmozhnaya, E.S., та інші
Опубліковано: (2015)
за авторством: Velmozhnaya, E.S., та інші
Опубліковано: (2015)
Identification of mechanical properties of compound feeds for modelling the processes of thickening and compaction
за авторством: J. Czaban, та інші
Опубліковано: (2017)
за авторством: J. Czaban, та інші
Опубліковано: (2017)
Control of mechanical properties for higt strength steels through optimized welding processes
за авторством: M. Fidler, та інші
Опубліковано: (2016)
за авторством: M. Fidler, та інші
Опубліковано: (2016)
Plasmon resonance sensitivity in fine metal particles
за авторством: Grigorchuk, N.I.
Опубліковано: (2014)
за авторством: Grigorchuk, N.I.
Опубліковано: (2014)
The correlation model of acoustic emission in fine diamond turning
за авторством: L. N. Devin, та інші
Опубліковано: (2017)
за авторством: L. N. Devin, та інші
Опубліковано: (2017)
Kinetic model of compaction in granular materials
за авторством: O. I. Herasymov, та інші
Опубліковано: (2015)
за авторством: O. I. Herasymov, та інші
Опубліковано: (2015)
Kinetic model of compaction in granular materials
за авторством: O. I. Gerasymov, та інші
Опубліковано: (2015)
за авторством: O. I. Gerasymov, та інші
Опубліковано: (2015)
Compact dynatron modulator
за авторством: Agafonov, A.V.
Опубліковано: (2001)
за авторством: Agafonov, A.V.
Опубліковано: (2001)
Fine time structure of lightnings on Saturn
за авторством: Ju. Milostnaja, та інші
Опубліковано: (2014)
за авторством: Ju. Milostnaja, та інші
Опубліковано: (2014)
FINE TIME STRUCTURE OF LIGHTNINGS ON SATURN
за авторством: Mylostna, K. Y., та інші
Опубліковано: (2014)
за авторством: Mylostna, K. Y., та інші
Опубліковано: (2014)
Generating models of anisotropic compact stars
за авторством: Jangid, Ankita, та інші
Опубліковано: (2026)
за авторством: Jangid, Ankita, та інші
Опубліковано: (2026)
Fine terrigenous and authigenous gold in marine sediments
за авторством: N. A. Fedoronchuk, та інші
Опубліковано: (2012)
за авторством: N. A. Fedoronchuk, та інші
Опубліковано: (2012)
On the mechanism of influence of the grain size of ferrite on the fatigue strength low carbon steel
за авторством: O. N. Perkov, та інші
Опубліковано: (2014)
за авторством: O. N. Perkov, та інші
Опубліковано: (2014)
Analytical method for calculation of the strength of cylindrical rock specimens during their longitudinal stress
за авторством: L. M. Vasyliev, та інші
Опубліковано: (2023)
за авторством: L. M. Vasyliev, та інші
Опубліковано: (2023)
Fine Morphological Features of the Terrestrial Weathering Products in Meteorites
за авторством: S. N. Shyrinbekova
Опубліковано: (2016)
за авторством: S. N. Shyrinbekova
Опубліковано: (2016)
Modelling of mined rock thin layer disintegration taking into consideration its properties changing during compaction
за авторством: O. O. Tytov, та інші
Опубліковано: (2019)
за авторством: O. O. Tytov, та інші
Опубліковано: (2019)
Mechanism of compacting the diamond nanopowder of detonation synthesis at its high pressure sintering
за авторством: O. O. Bochechka
Опубліковано: (2017)
за авторством: O. O. Bochechka
Опубліковано: (2017)
Схожі ресурси
-
Investigation of the influence of properties of small fraction of charge materials on their seal roller briquetting presses
за авторством: B. N. Majmur, та інші
Опубліковано: (2014) -
Development in ICHM development of technologies and equipment for briquetting small fraction of raw materials and industrial waste
за авторством: B. N. Majmur
Опубліковано: (2014) -
Method of estimation of the roll press bandage wear effect on technologic and power parameters of briquetting
за авторством: K. V. Bajul, та інші
Опубліковано: (2013) -
Forming recommendations for the development of a high-productivity rolling press advanced construction
за авторством: K. V. Bajul, та інші
Опубліковано: (2018) -
The development of scientific and methodological basis for the evaluation how the parameters of the forming element influence the elastic aftereffect in briquettes
за авторством: K. V. Bajul, та інші
Опубліковано: (2017)