Buchumschlag

Efficiency improving for gas removal from ladle furnace

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
Hauptverfasser:	S. N. Timoshenko, M. V. Kolesnikov, N. S. Timoshenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2015
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000988361
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Improvement of electric and technological modes of metal finishing in a ladle furnace
von: N. M. Perevorochaev, et al.
Veröffentlicht: (2011)

Determination of the rational profile of the lining of steel-teeming ladles to improve the removal efficiency of non-metallic inclusions
von: L. S. Molchanov, et al.
Veröffentlicht: (2018)

Forecast of metal finishing duration in a ladle furnace
von: N. M. Perevorochaev
Veröffentlicht: (2011)

Enhancement of the energy efficiency of electric steelmaking processes by means of natural gas conversion with the exhaust gases of an arc furnace
von: M. V. Gubinskij, et al.
Veröffentlicht: (2017)

Ways of increasing the energy efficiency of electric arc furnaces
von: S. N. Timoshenko, et al.
Veröffentlicht: (2019)

Stirring of liquid metal in ladle furnace by pulsing magnetic field
von: Ju. M. Gorislavets, et al.
Veröffentlicht: (2016)

The influence of electromagnetic forces on mixing bath ladle furnace ac
von: V. P. Piptjuk, et al.
Veröffentlicht: (2014)

Testing equipment to simulate the thermal processing of the melt in the ladle furnace
von: V. P. Piptjuk, et al.
Veröffentlicht: (2015)

Energy-efficient solutions for the modernization of DC steelmaking arc furnaces of the foundry class
von: S. N. Timoshenko, et al.
Veröffentlicht: (2017)

Fluoride removal from natural waters by filtration through glauconite processed with aluminum salts
von: V. V. Goncharuk, et al.
Veröffentlicht: (2008)

Numerical study of melt hydrodynamics in D.C. ladle-furnace unit
von: I. V. Krikent, et al.
Veröffentlicht: (2014)

The investigation of the influence of both accumulating and ladle pouring processes on the blast-furnace operation
von: V. A. Petrenko, et al.
Veröffentlicht: (2014)

Application of pekovogo coke for removal and warning of encumbered of furnaces of blast – furnaces
von: R. V. Kovalchik
Veröffentlicht: (2009)

Numerical modeling of high-current arc discharge in DC ladle-furnace unit
von: I. V. Krikent, et al.
Veröffentlicht: (2013)

The Researh of efficacy Removing non-metallies inclusions white inert gas is blowing on Metal in the industrial ladle with argon bubbles by Different Diameters
von: V. G. Efimova
Veröffentlicht: (2014)

Features of mass transfer in bath of dc ladle furnace unit with capacity 140 tons
von: V. P. Piptjuk, et al.
Veröffentlicht: (2012)

Energy-efficient solutions for modernization of small-capacity electric arc furnaces of a foundry class
von: S. N. Timoshenko, et al.
Veröffentlicht: (2018)

Influence of some factors on melt mixing during treatment on AC ladle furnace of middle power
von: V. P. Piptjuk, et al.
Veröffentlicht: (2011)

Use of Oxygen and Enriched Air in Heating Furnaces, Soaking Pits and Stands of Steel Casting Ladles Heating
von: I. N. Karp, et al.
Veröffentlicht: (2012)

Investigation of effect of calcium fluoride on power-technological characteristics of wheel steel treatment in ladle-furnace installation
von: G. A. Esaulov, et al.
Veröffentlicht: (2014)

Evaluation of the Influence of Electric Wind on the Efficiency of Dispersed Particles Removal from the Flue Gas Stream in Electrostatic Precipitators
von: I. A. Volchin, et al.
Veröffentlicht: (2019)

Increasing the efficiency of blast-furnace smelting by improving the quality of iron ore materials
von: A. S. Nesterov, et al.
Veröffentlicht: (2019)

A new approach to solving the problem of directional formation of final melts during steel debugging at a ladle-furnace unit
von: D. M. Tohobytska, et al.
Veröffentlicht: (2021)

Reserves increase the efficiency of blast furnaces
von: V. N. Zakharchenko, et al.
Veröffentlicht: (2014)

Antihemolytic Efficiency of Chlorpromazine under Posthypertonic Shock and Glycerol Removal from Erythrocytes after Thawing
von: E. A. Semionova, et al.
Veröffentlicht: (2017)

Experience of blast furnace operation with using improved quality coke and replacing of natural gas with pulverized coal
von: Ju. V. Filatov, et al.
Veröffentlicht: (2011)

Features thermal gas-dynamic operation of the blast furnace tuyere zone by blowing into the furnace of pulverized coal and natural gas
von: A. L. Chajka, et al.
Veröffentlicht: (2015)

The influence of the liquid refining slags composition on the efficiency of a ladle desulfurization of the converter steels
von: S. G. Melnik
Veröffentlicht: (2011)

Granular Material Pneumatic Transportation Under Increased Pressure of Carrier Gas
von: V. I. Timoshenko, et al.
Veröffentlicht: (2013)

Melting-pouring ladle with induction heating
von: V. A. Shapovalov, et al.
Veröffentlicht: (2010)

Improving ways to control and manage the blast furnace
von: V. I. Bolshakov, et al.
Veröffentlicht: (2014)

Effect of blast volume and composition of iron ore charge on efficiency of gas reducing ability degree in blast furnace
von: P. A. Zablotskij, et al.
Veröffentlicht: (2015)

Active carbons characteristics impact on the removing efficiency from water of pharmaceuticals with various chemical nature
von: E. A. Korzh, et al.
Veröffentlicht: (2016)

Melting-pouring ladle with induction heating
von: V. O. Mushegjan
Veröffentlicht: (2010)

Features of application of the lining of teeming ladles
von: V. G. Gerasimenko, et al.
Veröffentlicht: (2018)

The influence of heating of mist flow in a ladle lance on the impulse of gas suspension jet that flows into the melt. Report 2
von: N. V. Kosolap, et al.
Veröffentlicht: (2012)

Efficiency of gel compositions application for removable dentures shielding
von: Ju. G. Romanova
Veröffentlicht: (2013)

Financial Monitoring in the Securities Market of Ukraine
von: N. M. Timoshenko
Veröffentlicht: (2022)

The study of temperature fields in the thickness of the lining and the height of the ladle during drying and heating of the steel-teeming ladles with different lining
von: P. A. Plokhikh, et al.
Veröffentlicht: (2018)

Comparison of different technologies ladle desulphurization magnesium
von: A. F. Shevchenko, et al.
Veröffentlicht: (2015)